Kryžminių jungčių frezavimo staklės

STEGHERR KSF

Sąlyga: naudotas, Gamybos metai: 1996, Stop yes yes / no Machine dimensions 1000x1000x1300 mm Weight 800 kg Cross Mullion Milling Machine STEGHERR KSF-2 / E-4 - Year of manufacture: 1996 - Serial No. 57/9961 - function tested - including milling tools: 1. Milling unit for upper 90° milling 2. Milling unit for lower 90° milling 3. Milling unit for rear recessing 4. Milling unit for machining the counterpart without turning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter 2 x 130 mm / 2 x 160 mm - Motors 3 x 1.1 kW - Voltage 400 V, 50 Hz - Workpiece max. 56 x 80 mm Ncsdpfx Asxq Hiqjbrjn – min. 8 x 6 mm - Extraction nozzle D = 150 mm - Machine dimensions L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The KSF-2/4 cross mullion milling machine is successfully used worldwide. Our customers appreciate the precision, robustness and the broad range of applications of this proven machine. The milling of the cross mullion is accomplished in one operation by an upper and a lower milling unit, while the recessing is carried out by a third milling unit. Once the workpiece has been inserted, it is clamped automatically at the press of a button, the cross mullion joint is milled and the workpiece can be processed further using an additional front grooving unit (the fourth unit). This allows for completely tear-free cross mullions to be produced on the visible side, especially for previously profiled glazing bars. The high fitting accuracy of all cross mullions manufactured with our KSF-2/4 cross mullion milling machine is thus guaranteed.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) Ncedpet R T Hcjfx Abron - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, KSF-2E yra pasaulyje pirmaujanti specializuota CNC frezavimo staklė, skirta visiškai automatizuotai gamybai ir aukštos kokybės kryžminių jungčių bei grotelių pilnam apdirbimui serijinėje langų ir durų skersinių gamyboje. Dėl agregatų staklės gamina aukščiausios kokybės kryžmines jungtis iš medžio, aliuminio, MDF ar PVC ir nepriekaištingai apdirba visus skersinių grotelių elementus. Ncsdpsxl Dnaofx Abren OPERACIJOS • Kryžminės jungtys įvairių formų ir matmenų • Skersinių galų apdirbimas • Rėmo profilių pjovimas pagal matmenis Staklės papildomai aprūpintos skersiniu padavėju / elementų sandėliu.

Sąlyga: naudotas, Number of milling spindles: 2 units Fence: 1 unit Tooling: yes Cross Bar Milling Machine STEGHERR, Type KSF-mini ----- Including fence ruler with scale and adjustable stop. Tools included. Specialized milling machine for the efficient production of cross bar joints. The cross bar milling machine KSF-mini incorporates STEGHERR’s extensive experience in the construction of these specialized machines for cross bar joints. With the KSF-mini, all cross bar joints commonly needed in practice can be manufactured quickly and with a precise fit. Even pre-profiled muntins can be machined on the KSF-mini. Precision milling is achieved as the workpiece is clamped and machined on three sides in a single setup. Tool drive is provided via two three-phase motors; pneumatic clamping for the workpieces. The profile cutter is configured to match the rail width. The saw blades, used to trim the joint, can be adjusted to the profile cutter dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V 50 Hz Pneumatic pressure: 6 bar Included: ----- Table frame Foot switch Tooling as depicted: 1 profile cutter 3 saw blades (corresponds to a rail width of 10 mm) Fence ruler with scale and adjustable stop as shown in the pictures. Dimensions (LxWxH): approx. 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data according to manufacturer, subject to confirmation!) Ncodpjwi Upfjfx Abrsn

Sąlyga: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Ncodpfxednxydo Abrsn Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Įpjovimo veleno skersmuo – 20 mm Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Sąlyga: paruoštas naudoti (naudotas), Kryžminių skersinių frezavimo staklės Gamintojas: Stegherr Tipas: KSF Tinka kryžminių skersinių jungčių frezavimui, pvz., langams, durims ir baldams Nsdpfx Aow Imhcebrecn Įrengta 3 frezavimo agregatais Viršutinis ir apatinis frezavimo agregatai sinchroniškai frezuoja dvi kampines išpjovas, o trečiasis agregatas tuo pačiu metu formuoja išlyginimą Staklių stalas valdomas pneumatiniu-hidrauliniu būdu. Pirmyn ir atgal judėjimo greitis reguliuojamas. Yra pakojų valdymas 2 varikliai po maždaug 2,2 kW Galia apie 4,5 kW Suslėgto oro slėgis 6 bar Įtampa 380 V, 50 Hz Ištraukimo anga 180 mm Komplekte 3 frezavimo įrankiai

Sąlyga: geras (naudotas), Codice: 0272 Marca: STETON Modello: TF 5 Centro di lavoro per telai di porte e finestre Dati tecnici: Troncatrice: Diametro lama: 400 mm F30 Velocità lama: 3000 giri/min Movimento orizzontale lama pneumatico Motore: 3 Hp Albero intestatore: Lunghezza: 490 mm Motore: 10 Hp Velocità: 3000 giri/min Diametro albero: 50 mm Diametro utensile: 350 mm Corsa verticale albero: 450 mm Carro intestatore: Nedpfjx Itqfjx Abrjcn Velocità: 5/22 m/min Dimensioni: 350 x 685 mm Lunghezza pezzo min/max: 320/2600 mm Larghezza pezzo min/max: 20/200 mm Spessore pezzo min/max: 20/120 mm Lato profilatura: 1° albero di profilatura a salto (antistrappo) Lunghezza albero: 325 mm Diametro albero: 50 mm Motore: 5,5 Hp N° 4 posizioni Diametro utensile max: 220 mm Albero di profilatura principale: Lunghezza: 490 mm Motore: 10 Hp Velocità: 6000 giri/min Corsa verticale albero: 450 mm Diametro utensile max: 220 mm Gruppo listelli per vetro: Diametro lama: 180 mm Diametro albero: 30 mm Velocità: 6000 giri/min Motore: 3 Hp Carrello supplementare Albero per fresatura ferramenta Motore: 3 Hp Diametro albero: 40 mm Diametro utensile: 180 mm Diametro bocca di aspirazione: 120/80 mm Aria compressa: 6-7 bar Dimensioni d’ingombro: 2300 x 2800 x 1900 h mm Peso: 2250 kg

Sąlyga: naujas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, dvipusis, Line for lengthwise joining with two milling machines. Press length 6,000 mm. The machine is new and has never been used. All corresponding tools are included with the machine. Ncjdswptnmjpfx Abrsn

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good! Ncsdpfx Absfzzhyorsn

Sąlyga: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Ncsdpfsnl Nqqex Abren Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))