Kryžminių briaunų frezavimas pirkti naudotą (9)

Sąlyga: visiškai atnaujintas (naudotas), Kryžminių skersinių frezavimo staklės Rsc Tccgsx Rdw Ioxasck Gamintojas: Stegherr Tipas: KSF Skirtos kryžminių skersinių jungčių frezavimui, pvz., languose, duryse ir balduose. Įrengtos 3 frezavimo agregatai: Viršutinis ir apatinis frezavimo agregatai vienu metu atlieka kampiniams pjūviams panašų frezavimą, tuo tarpu trečiasis agregatas vienu metu užtikrina lyginimą. Staklių stalas juda pneumatiniu-hidrauliniu būdu. Proc Tccjw Imhcogxaef Hjdpfsx Rhwlsx Af Ijng Padvavimo ir grįžimo greitis reguliuojamas. Valdymas pėdiniu jungikliu. 2 varikliai, kiekvienas po apie 2,2 kW galingumo Bendra galia apie 4,5 kW Suspausto oro slėgis: 6 barai Įtampa: 380 V 50 Hz Nutraukimo antgalio skersmuo: 180 mm

Sąlyga: naudotas, Gamybos metai: 1996, Stop yes yes / no Machine dimensions 1000x1000x1300 mm Weight 800 kg Cross Mullion Milling Machine STEGHERR KSF-2 / E-4 - Year of manufacture: 1996 - Serial No. 57/9961 - function tested - including milling tools: 1. Milling unit for upper 90° milling 2. Milling unit for lower 90° milling 3. Milling unit for rear recessing 4. Milling unit for machining the counterpart without turning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter 2 x 130 mm / 2 x 160 mm - Motors 3 x 1.1 kW - Voltage 400 V, 50 Hz - Workpiece max. 56 x 80 mm – min. 8 x 6 mm Hedpfxexq Hiqs Af Iong - Extraction nozzle D = 150 mm - Machine dimensions L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The KSF-2/4 cross mullion milling machine is successfully used worldwide. Our customers appreciate the precision, robustness and the broad range of applications of this proven machine. The milling of the cross mullion is accomplished in one operation by an upper and a lower milling unit, while the recessing is carried out by a third milling unit. Once the workpiece has been inserted, it is clamped automatically at the press of a button, the cross mullion joint is milled and the workpiece can be processed further using an additional front grooving unit (the fourth unit). This allows for completely tear-free cross mullions to be produced on the visible side, especially for previously profiled glazing bars. The high fitting accuracy of all cross mullions manufactured with our KSF-2/4 cross mullion milling machine is thus guaranteed.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019,

Sąlyga: naudotas, Gamybos metai: 2013, CNC profilio juostų apdirbimo centras Stegherr GLS-2, pagaminimo metai apie 2020, valdymas Beckhoff CP3919, serijos Nr. 00006sem. Laisva prekyba. Prašome atsiųsti savo pasiūlymą. Hnedpox Natcjfx Af Ieg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, KSF-2E yra pasaulyje pirmaujanti specializuota CNC frezavimo staklė, skirta visiškai automatizuotai gamybai ir aukštos kokybės kryžminių jungčių bei grotelių pilnam apdirbimui serijinėje langų ir durų skersinių gamyboje. Dėl agregatų staklės gamina aukščiausios kokybės kryžmines jungtis iš medžio, aliuminio, MDF ar PVC ir nepriekaištingai apdirba visus skersinių grotelių elementus. OPERACIJOS • Kryžminės jungtys įvairių formų ir matmenų Hnjdpfxoxl Dnae Af Isg • Skersinių galų apdirbimas • Rėmo profilių pjovimas pagal matmenis Staklės papildomai aprūpintos skersiniu padavėju / elementų sandėliu.

Sąlyga: naudotas, Number of milling spindles: 2 units Fence: 1 unit Tooling: yes Hnedpfxswi Upfj Af Isg Cross Bar Milling Machine STEGHERR, Type KSF-mini ----- Including fence ruler with scale and adjustable stop. Tools included. Specialized milling machine for the efficient production of cross bar joints. The cross bar milling machine KSF-mini incorporates STEGHERR’s extensive experience in the construction of these specialized machines for cross bar joints. With the KSF-mini, all cross bar joints commonly needed in practice can be manufactured quickly and with a precise fit. Even pre-profiled muntins can be machined on the KSF-mini. Precision milling is achieved as the workpiece is clamped and machined on three sides in a single setup. Tool drive is provided via two three-phase motors; pneumatic clamping for the workpieces. The profile cutter is configured to match the rail width. The saw blades, used to trim the joint, can be adjusted to the profile cutter dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V 50 Hz Pneumatic pressure: 6 bar Included: ----- Table frame Foot switch Tooling as depicted: 1 profile cutter 3 saw blades (corresponds to a rail width of 10 mm) Fence ruler with scale and adjustable stop as shown in the pictures. Dimensions (LxWxH): approx. 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data according to manufacturer, subject to confirmation!)

Sąlyga: paruoštas naudoti (naudotas), Kryžminių skersinių frezavimo staklės Gamintojas: Stegherr Tipas: KSF Tinka kryžminių skersinių jungčių frezavimui, pvz., langams, durims ir baldams Įrengta 3 frezavimo agregatais Viršutinis ir apatinis frezavimo agregatai sinchroniškai frezuoja dvi kampines išpjovas, o trečiasis agregatas tuo pačiu metu formuoja išlyginimą Staklių stalas valdomas pneumatiniu-hidrauliniu būdu. Pirmyn ir atgal judėjimo greitis reguliuojamas. Yra pakojų valdymas 2 varikliai po maždaug 2,2 kW Galia apie 4,5 kW Suslėgto oro slėgis 6 bar Įtampa 380 V, 50 Hz Hodpew Imhcjfx Af Isng Ištraukimo anga 180 mm Komplekte 3 frezavimo įrankiai

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 660 x 460 x 1200 mm Weight: 49 kg Total Power Requirement: 0.85 kW Tenon Router KSD Morsø KSD Tenon Router Manual / Electric Tenon Router. The perfect machine for precision routing of comb joints in glazing bars. Hsdpfx Afjvz Hgus Ieng The Morsø KSD is also suitable for 'fixed glazing bars.' The Morsø KSD routing machine features manual feed and clamping. The motor is single-phase, 220 V. The Morsø KSD routing machine is designed for routing grooves from 6 to 26 mm wide and up to 20 mm deep. Quick adjustment from one neck width size to another. The Morsø KSD is the ideal machine in conjunction with the Morsø N Series of glazing bar punch machines. - Length: 660 mm - Width: 460 mm - Total machine height: 1,200 mm - Stand height: 760 mm - Noise level: 70 dBA - Max. workpiece height: 55 mm - Max. workpiece width (with 10 mm cutter): 50 mm - Max. groove depth: 20 mm - Max. groove diameter: Ø 20 mm - Motor, single phase: 860W @ 29,000 rpm - Weight: 49 kg

Sąlyga: naudotas, Gamybos metai: 1999, No. 3076 STEGHERR NFT Cross Bar Slot Milling Machine Hodpfxsiyp D Dj Af Ijng Used, Year of manufacture: 1999 Special milling machine for cutting a groove on the top side of pre-milled glazing bars. Automatic operating sequence: The pre-milled glazing bar is positioned and centered against the stop. By pressing the bar against the stop, the milling process is started. The milling unit moves upward and automatically returns to its home position after machining. Milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Machine ready to plug in. Mobile base included. All technical details without guarantee, according to manufacturer's brochure. Private sale, VAT is not deductible. Collection in 73430 Aalen Transport dimensions approx. 600 x 400 x 1500 mm (LxWxH) Weight approx. 60 kg To avoid any misunderstandings, inspection on site is possible and recommended by appointment. Sale as is – current condition. Technical information, condition description, year of manufacture and delivery scope according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. No warranty is given on used machines. Sold as seen. Photos and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Payment in advance before collection or dispatch. Delivery terms: ex location.