Kryžminės liejimo staklės

Stegherr KSF

Būklė: naujas, Number of milling spindles: 2 pcs. Stop 1: yes Tools: yes Cross Mullion Milling Machine STEGHERR TYPE KSF-mini Includes: standard stop with 2 sliding stops, without tools With the KSF-mini, all cross mullion joints commonly encountered in practice can be produced quickly and precisely. The precise execution is achieved by machining the workpiece from three sides in one clamping operation. Tool drive is provided by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the width of the mullion. The saw blades used for the notching can be adjusted to the dimensions of the profile cutter by spacer rings. The swivel device is backlash-free. The machine is designed for a maximum workpiece cross section of 56 x 46 mm. Voltage Europe: 400V (+/-10%) / 3Ph / 50Hz, USA: 440V (+/-10%) / 3Ph / 60Hz Gtodpfx Aboyrtzqe Sow Other voltages on request. Operating manual available in German or English. Table stand: €1,030.00 Foot switch: €870.00 Setting optics: €130.00 Profile cutter in HM-Wepla design, available sizes: Ø 5, 7, 9, 11, 13 mm. Price per piece: €630.00 1 set of replacement indexable inserts for profile cutter (=10 pcs): €180.00 HM saw blade, price per piece: €160.00 (For a mullion of e.g. 10 mm, 3 saw blades are required) Adjustment of the machine to tools supplied by the customer: price per individual tool: €680.00 Packaging in crate (suitable for land transport): €650.00 Packaging on pallet shrink-wrapped (only within Europe, not for air freight): €340.00 Price ex works, unpacked, uninsured; for deliveries within Germany plus the VAT valid at the time of delivery. (All technical specifications according to manufacturer, without guarantee!)

Būklė: visiškai atnaujintas (naudotas), Kryžminių skersinių frezavimo staklės Rsc Tccgsx Rdw Ioxasck Gamintojas: Stegherr Tipas: KSF Godpfx Ajx Rhwljb Sstw Skirtos kryžminių skersinių jungčių frezavimui, pvz., languose, duryse ir balduose. Įrengtos 3 frezavimo agregatai: Viršutinis ir apatinis frezavimo agregatai vienu metu atlieka kampiniams pjūviams panašų frezavimą, tuo tarpu trečiasis agregatas vienu metu užtikrina lyginimą. Staklių stalas juda pneumatiniu-hidrauliniu būdu. Proc Tccjw Imhcogxaef Padvavimo ir grįžimo greitis reguliuojamas. Valdymas pėdiniu jungikliu. 2 varikliai, kiekvienas po apie 2,2 kW galingumo Bendra galia apie 4,5 kW Suspausto oro slėgis: 6 barai Įtampa: 380 V 50 Hz Nutraukimo antgalio skersmuo: 180 mm

Būklė: naudotas, Gamybos metai: 1996, Stop yes yes / no Machine dimensions 1000x1000x1300 mm Weight 800 kg Gjdpfxoxq Hiqo Ab Sotw Cross Mullion Milling Machine STEGHERR KSF-2 / E-4 - Year of manufacture: 1996 - Serial No. 57/9961 - function tested - including milling tools: 1. Milling unit for upper 90° milling 2. Milling unit for lower 90° milling 3. Milling unit for rear recessing 4. Milling unit for machining the counterpart without turning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter 2 x 130 mm / 2 x 160 mm - Motors 3 x 1.1 kW - Voltage 400 V, 50 Hz - Workpiece max. 56 x 80 mm – min. 8 x 6 mm - Extraction nozzle D = 150 mm - Machine dimensions L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The KSF-2/4 cross mullion milling machine is successfully used worldwide. Our customers appreciate the precision, robustness and the broad range of applications of this proven machine. The milling of the cross mullion is accomplished in one operation by an upper and a lower milling unit, while the recessing is carried out by a third milling unit. Once the workpiece has been inserted, it is clamped automatically at the press of a button, the cross mullion joint is milled and the workpiece can be processed further using an additional front grooving unit (the fourth unit). This allows for completely tear-free cross mullions to be produced on the visible side, especially for previously profiled glazing bars. The high fitting accuracy of all cross mullions manufactured with our KSF-2/4 cross mullion milling machine is thus guaranteed.

Būklė: naudotas, Number of milling spindles: 2 units Fence: 1 unit Tooling: yes Cross Bar Milling Machine STEGHERR, Type KSF-mini ----- Including fence ruler with scale and adjustable stop. Tools included. Specialized milling machine for the efficient production of cross bar joints. The cross bar milling machine KSF-mini incorporates STEGHERR’s extensive experience in the construction of these specialized machines for cross bar joints. With the KSF-mini, all cross bar joints commonly needed in practice can be manufactured quickly and with a precise fit. Even pre-profiled muntins can be machined on the KSF-mini. Precision milling is achieved as the workpiece is clamped and machined on three sides in a single setup. Tool drive is provided via two three-phase motors; pneumatic clamping for the workpieces. The profile cutter is configured to match the rail width. The saw blades, used to trim the joint, can be adjusted to the profile cutter dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V 50 Hz Pneumatic pressure: 6 bar Included: ----- Table frame Foot switch Tooling as depicted: 1 profile cutter 3 saw blades (corresponds to a rail width of 10 mm) Fence ruler with scale and adjustable stop as shown in the pictures. Dimensions (LxWxH): approx. 1,330 x 570 x 1,430 mm Weight: approx. 150 kg Gsdpswi Upfofx Ab Sotw (All technical data according to manufacturer, subject to confirmation!)