UV džiovintuvas, "Cefla Ecolight", 1 mėgintuvėlis

Sorbini/Cefla Eco Light

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing Hedpfx Agjwu Tu Deiei - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Hedpfx Aoh A Sfdegisi Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Hodpfxswhmdfo Agioi Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Hjdpfx Agstvpiloisi

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) Hodpfx Aoqwyclsgioi X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Naujas Friulmac EQ 004 2.5 su padavimo konvejeriu ir padavimo bunkeriu Valdymas liečiamu ekranu ir automatinis reguliavimas Darbinis ilgis: min 190 mm – maks 2500 mm Plotis: min 30 mm – maks 250 mm Hsdpsvupm Dofx Agiji Storis: min 12 mm – maks 35 mm Greitis: 6–25 m/min 2 x 2 Viršutinis velenas – 3 kW – 720 aps./min. Pagrindinis profiliavimo velenas – 4 kW – 7200 aps./min. Dėl išsamesnės informacijos galiu atsiųsti originalią dokumentaciją.

Sąlyga: geras (naudotas), WEBER pipe extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Hedovryhyspfx Agiji

Gamybos metai: 1997, Sąlyga: geras (naudotas), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe Hedpfx Ageidi Iveiji • Brush unit • Ionization

Gamybos metai: 1977, Sąlyga: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Hodped N Rb Djfx Agisi

Sąlyga: naujas, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and duty cycle deliver outstanding arc characteristics for industrial MIG/MAG applications. Integrated synergic controls make setup simple and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to ensure perfect quality. MULTIPROCESS MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm Hsdpfxsmxkdpo Agisi - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire (polarity reversal): Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.