SCHLATTER TINKLINIO SUVIRINIMO LINIJA MG 24.1/8C

SCHLATTER MESH WELDING LINE MG 24.1/8C

SCHLATTER MG24 Welded Mesh Production Line

Completely Refurbished

WORKING RANGE

Panel width: max. 2,500 mm
Weft wire length: min. 900 mm
Weft wire length with QF5 distributor: min. 300 – 1,600 mm
Maximum spacing between outer warp wires: 2,400 mm
Mesh length (warp wire length): max. 2,500 – 6,000 mm
Minimum spacing between warp wires: 100 mm
Spacing between weft wires: 25 – 250 mm
Adjustable by cutting device (0-1)
Warp wire diameter: 4.0 – 12.0 mm
Weft wire diameter: 4.0 – 12.0 mm
Number of warp wires: max. 24

MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes:

- 1 Machine base frame
- 1 Upper support for press reception, continuously adjustable via handwheel
- 1 Magnet holders with holding magnets and monitoring of weft wires
- 1 Row of pneumatic solenoid valves for press actuation
- 1 Air and water system
- 2 Pneumatic rotary drives with oil damping
- Static torque with 5 bar compressed air: 480 Nm
- Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1)
- 1 Advance carriage with panel lifting device
- 1 Set of tools for machine adjustment

WELDING SECTION Includes:

- 8 C-type transformers
- Rated power per transformer: 100 kVA
- Secondary open-circuit voltage: 7.1 V
- Secondary rated current: 14 kA
- 8 ES 130 thyristor contactors
- 12 Welding presses: 5.0 kN
- 12 Warp wire current bridges for 50–100 mm warp wire spacing
- 12 Warp wire current bridges for 100 mm stepped warp wire spacing
- 10 Warp wire current bridges for 100–150 mm warp wire spacing
- 8 Warp wire current bridges for 150 mm stepped warp wire spacing
- 6 Warp wire current bridges for 150–200 mm warp wire spacing
- 6 Warp wire current bridges for 200 mm stepped warp wire spacing
- 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm
- 24 Wire holding clamps

Panel width: max. 2,500 mm
Weft wire length: min. 900 mm
Weft wire length with QF5 dispenser: min. 300 – 1,600 mm
Spacing between extreme warp wires: max. 2,400 mm
Mesh length (warp wire length): max. 2,500 – 6,000 mm
Spacing between warp wires: min. 100 mm
Weft wire spacing: 25–250 mm
Gtodpfjwu Tu Dox Ab Sjw
Warp wire diameter: 4.0 – 12.0 mm
Weft wire diameter: 4.0 – 12.0 mm
Number of warp wires: max. 24

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.