Stalinė frezavimo staklės

SCM tf130 class

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Hfsdpepq If Dofx Ab Sed Location: ex stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Hjdjdqzcxepfx Ab Sjfd Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Hjdspgkmwjpfx Ab Sofd Location: In stock at 54634 Bitburg - Available immediately -

Būklė: beveik kaip naujas (naudotas), Arbeitsbreite 1350 mm Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten, neuwertigen Zustand. Hfjdpfx Aouuitgjb Sed

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Milling spindle, non-interchangeable: 30 mm Clamping height: 140 mm Height adjustment: 140 mm Extraction ports: 2 x ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 light grey and RAL 5000 violet blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Hfsdsgz Sifepfx Ab Sod Robust German engineering Spindle moulder with fixed, double-sided tilting spindle for a tilt range of -5° to +45.5° Operation via handwheel at the base of the machine frame Height and tilt adjustment via handwheels Analog dials for height and tilt adjustment 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Electronic speed display Push buttons for spindle start and stop Forward and reverse operation Quick-change cutter clamping system Finely planed cast iron table Controls clearly visible and easily accessible at the lower machine body Fence 215 with total adjustment via handwheel, incl. multiplex fence faces Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved cutting fence 1639 Tapoa CE certified GS tested

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Hjdpsqlckpjfx Ab Sjfd • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Gamybos metai: 2001, bendras ilgis: 2 680 mm, bendras plotis: 1 200 mm, bendras aukštis: 2 200 mm, Unladen weight: 950 kg Price: On request Spindle Moulder Hofmann TFS 1200 Serial number: 127-01204 Year of manufacture: 2001 7.8 kW, 16 A, 400 V Spindle tilting adjustable up to 45 degrees. Aigner safety guide Power feed unit Hjdpfowl I E Ejx Ab Sjfd - Year of manufacture: 2001 - Documentation available: No - CE certificate available: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tilting spindle: - Min. tilt angle [°]: 0 - Max. tilt angle [°]: 45 - Power feed unit included: Yes - Manufacturer: Masterwood - Model: Euromeo - Number of rollers: 4 - Number of speeds: 2 - Guide included: Yes - Manufacturer: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed adjustment: Stepwise - Transport dimensions: 2680 mm x 1200 mm x 2200 mm (L x W x H) - Transport weight [kg]: 950 kg - Number of packages for transport: 1 Financial information VAT: The stated price is excluding VAT VAT/differential taxation: VAT deductible for business customers Delivery and trade-in possible for all industrial equipment at any time Yorick Diebels

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Naudota mašina iš veiklos nutraukimo. GROSS smulkintuvas - Modelis GAZ 62 Hfodjx Tp U Repfx Ab Ssd - Pagaminimo metai: 2012 - 18,5 kW - Gera būklė - Prieinama iš karto

Būklė: naudotas, Gamybos metai: 1995, Naudota mašina Hedexymd Hopfx Ab Ssfd Metai: 1995 Įranga ir techniniai duomenys: Pjovimo ilgis: 5300 mm Pjovimo aukštis: 2200 mm Maks. ruošinio storis: 80 mm Variklis: 5,5 kW Suspausto oro jungtis: 6 bar, 50 NL/min Ištraukimo jungtis: 2 x 100 mm, 1200 m³/h Pneumatinė agregato fiksacija Pneumatinis agregato panardinimas Skaitmeninis horizontalus rodmuo Prieinamumas: pagal susitarimą Vieta: Flörsheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, 158 000 laufende Meter BASISMASCHINE AURIGA 1308XL TECHNISCHE DATEN Kantenanleimmaschine für das Anleimen und Nachbearbeiten von Plattenwerkstoffen Kantenstärke Rollenware: 0,4–3 mm (materialabhängig) Kantenstärke Streifenware: 0,4–8 mm (materialabhängig) Kantenquerschnitt: max. 6 x 42 mm Kantenhöhe: max. 65 mm Werkstückdicke: 8–60 mm (bei einzelnen Aggregaten Einschränkungen möglich) Werkstückbreite: min. 65 mm Werkstücklänge: min. 160 mm (ohne Eckenrunden 1832) Werkstücklänge: min. 180 mm Vorschubgeschwindigkeit: 10 m/min. MASCHINENSTEUERUNG Edge Control 19 mit 18,5'' Touchscreen-Farbmonitor 16:9 Leistungsstarke Steuerung mit äußerst einfacher Bedienung für effiziente Maschineneinstellung und -umrüstung. Schwenkbares und drehbares Bedienpanel auf Augenhöhe Motorisch verstellbare Druckbalken iTronic – Adaptive Druck- und Leimmenge-Regelung Automatische, programmgesteuerte Feineinstellung Optimale Anpassung an Kantenstärke, Kantenmaterialien und Leimtypen garantiert beste Bearbeitungsergebnisse Automatisierungspaket bestehend aus: - Automatische Leimmenge-Regelung - Adaptiver Endabschneider - Adaptives Druckaggregat inkl. Restleimmengenanzeige inkl. vollautomatische PUR-Spülroutine Vorfraeseinheit FG201 mit 2 Fräsköpfen für das Fügen der Plattenkante Hfodpfx Aboxayvpj Sjd 1x gegenlaufend, 1x gleichlaufend Diamantfräser, Ø70x64x30 mm, Z2+2 Kantenzuführung 1903 automatischer Transport von Rollen und Streifen max. Beladekapazität: 40 mm Glu Jet GJ301 Leimauftragssystem (2,3 kW, 50 Hz) Automatische Leimhöhenverstellung Glu Jet Hybridtechnologie für EVA- und PUR-Klebstoffe Verarbeitung von Kartuschen- und Granulatform für neutrale und farbige Klebstoffe Behälter für 1,4 kg Kartuschen (4 Kartuschen) Behälter für 1,5 kg Granulat Pneumatisches Druckaggregat 1912-3 Erste Rolle angetrieben mit pneumatischer Absenkung, 2 konische Andrückrollen Ablängaggregat 1918 (60 mm) pneumatisch (2 x 0,45 kW, 12.000 min-1) pneumatisch schwenkbar 0/10° Absaughauben für Endbesäumaggregat 1918 Multifunktionsfräsaggregat 1827 MOT4 für das Fräsen der oberen und unteren Längskante mit motorischer Positionierung der horizontalen Tastschuhe mit motorischer Achsverstellung der Fräsmotoren inkl. pneumatische Einstellung (oben und unten getrennt) für Bündig- und Radiusfräsen inkl. Blasdüsen - Bündigfräsen - Radiusfräsen - Fasenverstellung manuell 0 – 15° (max. Kantenstärke 6 mm) Pneumatische Schwenkvorrichtung für Fräsaggregat 1827 MOT4 Pneumatisches Schwenken auf 15° über Steuerung Pneumatische Vertikaltaster Verstellung der Vertikaltaster um 0,1 mm für Überstandsbearbeitung Eckenrundungsaggregat (1 x 0,35 kW, 200 Hz, 12 000 min-1) Eckenrundungsfunktion bis 3 mm Kantenstärke Werkstückdicke: 12–60 mm, DIA-Werkzeug R=2 mm Ziehklingenaggregat 1929 MOT4 inkl. Hochglanzpaket mit motorischer Verstellung der horizontalen Tastrollen, inkl. pneumatische Einstellung (oben und unten getrennt) Flächenziehklinge FK701 Mit Vor- und Nachziehklingen zur Entfernung des Leimüberschusses über die gesamte Plattenlänge für eine saubere Fuge Polieraggregat 1940 (2 x 0,09 kW, 50/60 Hz, 1400 min-1) Für das Finishen und Polieren der Kanten, mit 2 Textilscheiben, schwenkbar 0 – 5°.