Stalinės frezavimo staklės Hofmann TFS 1200 2001

Hofmann TFS 1200

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: 127-01204, Funkcionalumas: visiškai funkcionalus, galia: 7,8 kW (10,61 AG), ašies skersmuo: 40 mm, pasukimo diapazonas: 45 °, stalo plotis: 450 mm, stalo ilgis: 2 680 mm, TECHNINĖ INFORMACIJA Stalo ilgis: 2 680 mm Stalo plotis: 450 mm Pakreipiama velenas: Automatinis Didžiausias veleno pakreipimas: 45° Veleno skersmuo: 40 mm Minimali veleno apsukų per min. (RPM): 3 000 Veleno apsukų reguliavimas: Pakopinis ĮRANGOS DUOMENYS Pagrindinio variklio galia: 7,8 kW Maitinimo įtampa: 400 V Maitinimo srovė: 16 A Matmenys ir svoris Transportavimo matmenys (Ilg. x Pl. x Aukšt.): 2 680 x 1 200 x 2 200 mm Transportavimo svoris: 950 kg Padavimo įtaisas Gamintojas: Masterwood Modelis: Euromeo Ratukų kiekis: 4 Greičių kiekis: 2 Kreipiančiojo gamintojas: Aigner Hodpfx Aloy Tniyorenn

Būklė: naujas, Load capacity 500 kg Hnsdpfxsq Sc Auo Alrsn Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 - Packaging suitable for truck transport.

Būklė: naudotas, Gamybos metai: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 0.01 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Used, top condition, premium equipment With plunge spindle. This milling machine is capable of performing entry and exit milling operations. This means the milling spindle can pneumatically plunge in and out of the workpiece, controlled by adjustable limit switches and a pneumatic traversing table. Hodpfx Aljy Ay Dzsronn Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine No.: P127-92-222-723 Motor: reinforced 5.0 / 6.2 kW Swiveling: from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 spindle speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Reversible (forward/reverse) Table size: 2000 x 830 mm Spindle diameter: 30 mm Milling fence with fine adjustment Digital readouts for fence position, diameter, and cutting depth Electric height adjustment Electric tilt adjustment Digital display for swivel angle and spindle height Extraction connection diameter: 2 x 120 mm Space required approx. 2000 x 1600 x 1400 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded on truck, unpacked Delivery in as-inspected condition, function tested, no overhaul, without warranty or guarantee.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Hodpjdqzcxofx Alrenn Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naudotas, Gamybos metai: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Unit including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station radius R 2.5 mm. Technical Description: - Application of hotmelt adhesive to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable insert cutters (combination version), fine adjustment of the cutter from the operator side - Free slots for additional processing aggregates (Hebrock System) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate viewing windows from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic including cooling and antistatic spray device (built 2014) - 1 pc. hot air unit for producing optical zero joint when using the appropriate edge materials - Incl. pneumatic glue pot positioning - Incl. cooling and antistatic spray device - Incl. 2 additional quick-change edge channels - Incl. special corner rounding trimming unit, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible – extra costs upon request - Technical data: max. panel thickness 40 mm, edge thickness 1.2 – 2.0 mm, 7 – 10 m/min feed speed, air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled, ready for operation after approx. 2 min Upgrade to 8 mm edge thickness: - 1 pc for max. workpiece thickness 40 mm - Incl. pneumatic saw adjustment, special version for min. workpiece thickness 8 mm - 1 pc 3-point pneumatic milling adjustment - 1 pc switching for radius – chamfer – flush for the combination milling stations, eliminating manual adjustment for the third stop position (PLC control required) Hedpfx Alox S Hmzeronn - Buffing station (polishing wheel) 1 pc - Corner rounding trimming unit 1 pc incl. combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 pc incl. pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 pc with pneumatic engagement control - Complete chassis 1 pc - Glue station change system incl. glue discharge device downward (preparation) 1 pc; without second glue pot – includes the ability to process PU adhesives - Groove saw unit vertical in the panel 1 pc incl. pneumatic lifting device, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm - Special version groove saw motor with higher power - Extraction unit for jointing aggregate (internal) 1 pc at the machine's extraction manifold - Ball bearing for corner rounding cutter 24.1 mm 1 pc - Ball bearing for corner rounding cutter 24.2 mm 1 pc - Protective agent spray device 1 pc for edge surfaces on sensitive edge materials - Combined spray device for panel (separating and cleaning agent spraying) Location: Supplier’s stock

Būklė: naudotas, 7 vnt. lankstymo įrankių šarnyriniams lankstymo presams, ilgis 3000 mm Hedpjb D Ry Rofx Alrsnn

Būklė: naudotas, Gamybos metai: 2001, bendras ilgis: 1 700 mm, bendras plotis: 1 000 mm, bendras aukštis: 2 100 mm, Spalva: Pilka Kaina: Pagal užklausą - Ypatumai: - Aprašymas: Skaitymo pozicionavimo sistema neveikia tinkamai. Kaina esamos būklės. - Gamybos metai: 2001 - Dokumentacija prieinama: Ne - CE žymėjimas: Taip - CE sertifikatas: Ne - Serijos numeris: AB/143039 - Veleno skersmuo [mm]: 40 - Stalo ilgis [mm]: 1195 - Stalo plotis [mm]: 350 - Pateikimo įrenginys: Taip - Vadelės: Taip - Įrankių raktas komplekte: Taip - Veleno greitis: Rankinis Hedjymlahspfx Alrjnn - Įtampa [V]: 400 - Srovės sunaudojimas [A]: 12 - Saugiklis [A]: 20 - Transportavimo matmenys: 1700 mm x 1000 mm x 2100 mm (ilg. x plot. x aukšt.) - Transporto paketų [vnt.]: 1 Finansiniai duomenys PVM: Nurodyta kaina be PVM PVM/Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir įrenginių supirkimas visada galimi visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: labai geros būklės (naudotas), Apatinės veleno frezavimo staklės SCM T150 Veleno skersmuo: 35 mm Bendras veleno ilgis: 180 mm Elektrinis veleno pakėlimas Hjdpfx Aljw Ral Horsnn Elektrinis liniuotės judėjimas Elektriškai reguliuojamas kampas -10/45° Kintamas veleno greitis: 3000-4500-6000–7000-10000 aps./min Variklio galia 5,5 kW DTR techninė dokumentacija

Būklė: naujas, Gamybos metai: 2026, Series machine MBM • Easy start in the engine performance class • Designed for smooth and efficient single-person operation • Produce complete profiles in one operation and precisely repeat them at any time • Wear-free and maintenance-free direct eccentric drive Hsdpswf Hghefx Alrjnn Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorized back gauge 6-750 mm • Foot switch • 16 A connection plug with 5 m cable (within the EU) • Connection voltage: 3 x 400 Volts, 50 Hz (within the EU)

Būklė: naudotas, Gamybos metai: 1999, Naudota mašina Pagaminimo metai: 1999 su elektriniu aukščio ir pasvirimo reguliavimu pagrindiniam pjūklui, matmenų įvedimas per klaviatūrą Hnedpfx Aoy Ih R Telrsn digitalinis pasvirimo kampo ir pjovimo aukščio rodmuo CE atitiktis Pjovimo ilgis 3000 mm su vidurio ir galinės padėties fiksavimu Pjovimo plotis 1000 mm su skaitmenine indikacija ir tiksliu reguliavimu Pjovimo aukštis iki 175 mm, kai pjūklo disko diametras 500 mm (tam reikia išmontuoti įpjovimo pjūklą) Variklis 5,5 kW su 4 sukimosi dažniais 3/45/6000 aps./min rankiniu būdu reguliuojamas su automatiniu stabdžiu ir skaitmeniniu apsukų rodmeniu 2 ašių įpjovimo pjūklas su elektriniu aukščio ir šonų reguliavimu Prieinamumas: trumpas pristatymo laikas Sandėlio vieta: Röllbach