Platus juostinis šlifuoklis

SCM DMC SD 60 - RCS 110

- NEW -

Fedpfovwfrnsx Acuopn
GENERAL FEATURES:

Machine frame and work table
* Steel structure with electric control cabinet at the front of the machine
* Introduction of sanding belts from the left side of the machine
* Motorized table height adjustment
* Main motor integrated into the machine frame

Electrical equipment
* Electromechanical control panel on the left front side of the machine
* Automatic star-delta starter for the main motor
* Motor protection switches for the motors
* Motors with protection class IP 54

Emergency and safety devices
* Safety microswitch for thickness overrun
* Automatic brake for immediate stopping of the aggregates
* Emergency stop bar at the workpiece infeed
* Mushroom switch at the workpiece infeed and outfeed
* Lockable main switch
* Automatic emergency machine shutdown in cases of:
- sanding belt breakage
- sanding belt not tensioned
- protection against lateral wandering of sanding belt
- lack of compressed air
- main motor overload

Note: The standard version with 400 Volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor.
If the 400 Volt power supply is without a neutral conductor, a single-phase transformer from the price list must be ordered as well. The same transformer must also be ordered with a machine having a voltage higher than 400 Volts, regardless of whether a neutral conductor is present or not.
Machines with 220 or 230 Volts (50 or 60 Hz) are available at an extra cost (see price list).

BASE MACHINE STANDARD EQUIPMENT
- R140/85 rubber-coated calibrating roller, diameter 140 mm 85 Sh - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm 45 Sh - 2nd position
- Hard sanding pad with manual working height adjustment
- Main motor 11 kW (15 HP)
- Electronic ammeter for main motor to indicate current consumption
- Electronic display of working height
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Kickback protection at the infeed before the first aggregate
- Rubber feed belt 60 Sh
- Roller table with two rollers at infeed and outfeed of worktable
- Belt feed with two speeds 4.5 / 9 m/min with gear motor
- Automatic belt centering

Working width mm: 1,100
Min./max. working height mm: 4 – 170
Sanding belt width mm: 1,115
Sanding belt length mm: 2,150
Main motor power kW (HP): 11 (15)
Gear motor kW (HP): 0.45/0.8 (0.6/1.1)
Feed speed m/min: 4.5/9

Comprises:

10.90.87 European safety regulations (mark C.E.)
93.07.31 Volt 400 EU
93.12.01 Frequency 50 Hz
44.44.19 Version "B" for RCS
33.31.50 Roller table at infeed and outfeed for long workpieces
62.44.50 10" operating panel with "eye-S" software integration
31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate
97.50.71 Main motor 15 kW (20 HP)

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.