Apdirbimo centras

SCM ACCORD 25 FX

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, galia: 12 kW (16,32 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, X ašies eiga: 5 020 mm, Y ašies eiga: 1 380 mm, ašių skaičius: 5, SCM Accord 25 FX, 2016 metų, Norvegija. Labai gera mašina, visi funkcionalumai 100% veikiantys. Ši staklė buvo naudojama mažoje dirbtuvėje (tik 3 darbuotojai), nenaudota kasdien. Mašina yra pietų Norvegijoje. Tai penkių ašių CNC staklės. Įrankių darbinė zona: X 5020 mm, Y 1380 mm. Dvi vakuuminės pompos po 130 m3/h kiekviena. OSAI valdymo – servokontrolės sistema (pagaminta Japonijoje). 12 kW pjovimo variklis su HSK 63 griebtuvu. Vandeniu aušinama. Visa techninė informacija pateikta pridedamame PDF dokumente. Hodpjy Sgq Hsfx Abvjnl - „Rekman Machine“ nuo 1986 m. atlieka CNC medžio apdirbimo staklių aptarnavimą Norvegijoje.

Būklė: geras (naudotas), Gamybos metai: 2009, Elumatec SBZ 140 Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F fitting, 8-position tool changer Max. milling diameter: 80 mm Max. saw diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotary A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel Hsdpfxjx E Ahzs Abvjnl A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system with PC operation, color display, USB & network. Software: eluCam. Automatic material clamps; automatic positioning via locating pins Pendulum/shuttle processing (two working zones) to improve production throughput time. In addition to milling and drilling, also tapping, sawing, and profile processing—all with stationary clamped profiles. Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend verifying all relevant details. Financial information VAT/Margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Būklė: naudotas, mašinos/transporto priemonės numeris: 008319, Darbo sritis X ašis: 6380 mm Darbo sritis Y ašis: 1380 mm Darbinis paviršius: Su vakuuminiais konsoliniais atramos Pagrindinio veleno galia: 11 kW Hnjdpfx Abjx A Tc Isvol Valdomų ašių skaičius: 5 ašys Įrankių vietų skaičius: 32

Būklė: naudotas, Gamybos metai: 2018, Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine No.: AA10000992 Table dimensions: 5020 x 1380 mm (L x W) Worktable equipped with 2 vacuum zones Worktable equipped with 2 reference stops Includes 8 reference pins and 8 supports XY vector speed: 35 m/min Axis movements Maximum speed X-axis: 25 m/min (per space) Maximum speed X-axis: 90 m/min (per speed) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Control Machine control: KVARA control Windows Embedded Standard 7-64bit Hard drive capacity: 500GB - 7200rpm Microprocessor: Intel Pentium - 2.9GHz RAM: 8GB DDR4 XILOG-MAESTRO software package Includes vacuum pump Motor power: 5.5 kW Pump capacity: 250 m³/hour Maximum vacuum: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (L x W x H) Total weight: 7,500 kg - Year of manufacture: 2018 - Documentation available: No - CE certification available: Yes - CE certificate available: No - Serial number: AA10000992 - Number of router spindles [pcs]: 2 - Router spindle 1: - Number of controlled axes [pcs]: 3 - Min. spindle speed [rpm]: 6,000 - Max. spindle speed [rpm]: 18,000 - Main motor power [kW]: 15 - Router spindle 2: - Number of controlled axes [pcs]: 3 - Min. spindle speed [rpm]: 600 - Max. spindle speed [rpm]: 24,000 - Main motor power [kW]: 12 - Type of router table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions [pcs]: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump included: Yes - Number [pcs]: 1 - Brand: Becker - Main motor power [kW]: 5.5 - Capacity [m³/h]: 250 - CNC options: Waste conveyor belt - Table length [mm]: 5020 - Table width [mm]: 1380 - Working area Y [mm]: 1300 Financial Information VAT: The price stated is plus VAT VAT/differential taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Hnsdjycwupjpfx Abvsl Glenn Smeets

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration Hnedpsv I Akvofx Abvjl - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 680 mm, Y ašies eiga: 1 380 mm, Z ašies eigos atstumas: 250 mm, valdiklio modelis: Xilog Maestro, veleno greitis (maks.): 24 000 aps./min, TECHNINĖS DETALĖS Darbinė X ašies zona: 3 680 mm Darbinė Y ašies zona: 1 380 mm Darbinė Z ašies zona: 250 mm Veleno apsisukimų dažnis: 24 000 aps./min. Darbo laukų skaičius: 2 Reguliuojamų tašų skaičius: 6, 1 300 mm Pneumatinių bakelito tašų skaičius: 4 Reguliuojamų siurbimo puodelių skaičius: 3 Įrankių keitimo sistema priekyje: 10 pozicijų Įrankių keitimo sistema gale: 16 pozicijų F 12L gręžtuvo galvos vertikalios ašys: 8 F 12L gręžtuvo galvos horizontalios X ašies: 2 F 12L gręžtuvo galvos horizontalios Y ašies: 2 MAŠINOS DUOMENYS Elektroveržliaraktis: 12 kW, HSK 63F Vakuuminis siurblys: 250 m³ Valdymas: Xilog Maestro ĮRANGA Tecpad mobilusis pultas Tašinis darbo stalas Juostinis lazeris virtualiai nulinio taško padėčiai Y kryptimi nustatyti Hodpfoydmbnox Abvonl Prisma KS 5 ašių vertikali elektroveržliaraktis Įrankių komplektai griovelių darymui Pro-Speed saugos sistema Priekinė apsaugos ir saugos sistema Automatinė tepimo sistema

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. Hedpfx Abjxy Tmnevonl AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Hnsdpfexnlgcex Abvel Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Būklė: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port Hjdpfewgwlkox Abvonl 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.

Būklė: geras (naudotas), Automatinė storio obliavimo staklė skirta stalių dirbtuvėms, nestandartinių baldų gamybai, medinių langų rėmų, medžio apdirbimo, lentpjūvėms, plastikams, kompozitinėms medžiagoms ir kt. - CE standartas Techniniai duomenys: • Elektroninis stalo padėties nustatymas • Pneumatinis volelių slėgio reguliavimas • Pavaros sistema su 3 didelio skersmens motorizuotais viršutiniais voleliais – lengvai keičiami • Elektroninis padavimo greičio reguliatorius 4–20 m/min Hedpfsyi E T Tex Abvsnl • Darbinio stalo matmenys 630 x 1000 mm • Maksimali darbinė plotis 630 mm • Minimali/maksimali darbinė aukštis 3/300 mm • Mažiausias ruošinio ilgis 260 mm • 4 peiliai • Variklio galia 7,5 AG • Padavimo variklis 2 AG • Dulkių nusiurbimo angos skersmuo 150 mm • Bendri matmenys mm 1360 x 1080 x 1220 h • Svoris 1000 kg