Juostinis šlifuoklis

SCM DMC sd60

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, SCM plataus juostos šlifavimo staklės dmc sd 60 DMC60 RCS 110 AB /00003689 Europos saugos reikalavimai (C.E. ženklas) Įtampa 400 V EU Dažnis 50 Hz Šlifavimo plotis: 1100 mm "B" tipas RCS Įeinantis ir išeinantis ritininis stalas ilgiems ruošiniams Elektroninis programavimo blokas "LOGIC SC" "RA" įstrižai rifliuotas plieninis kontaktinis volas – 1-asis agregatas Cpedpfjx Nrwmsx Af Teu 2-asis agregatas – šlifavimo bato agregatas Pagrindinis variklis 15 kW (20 AG) Vieta: pas klientą - galima iš karto -

Sąlyga: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Cpsdpfxjgtm U Ae Af Tou Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Sąlyga: naujas, - NEW - GENERAL FEATURES: Machine frame and work table * Steel structure with electric control cabinet at the front of the machine * Introduction of sanding belts from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with protection class IP 54 Emergency and safety devices * Safety microswitch for thickness overrun * Automatic brake for immediate stopping of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom switch at the workpiece infeed and outfeed * Lockable main switch * Automatic emergency machine shutdown in cases of: - sanding belt breakage - sanding belt not tensioned - protection against lateral wandering of sanding belt - lack of compressed air - main motor overload Note: The standard version with 400 Volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400 Volt power supply is without a neutral conductor, a single-phase transformer from the price list must be ordered as well. The same transformer must also be ordered with a machine having a voltage higher than 400 Volts, regardless of whether a neutral conductor is present or not. Machines with 220 or 230 Volts (50 or 60 Hz) are available at an extra cost (see price list). BASE MACHINE STANDARD EQUIPMENT - R140/85 rubber-coated calibrating roller, diameter 140 mm 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for main motor to indicate current consumption - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of worktable - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering Cpodpfx Afjvwfrne Tsu Working width mm: 1,100 Min./max. working height mm: 4 – 170 Sanding belt width mm: 1,115 Sanding belt length mm: 2,150 Main motor power kW (HP): 11 (15) Gear motor kW (HP): 0.45/0.8 (0.6/1.1) Feed speed m/min: 4.5/9 Comprises: 10.90.87 European safety regulations (mark C.E.) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10" operating panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibration and Fine Finishing Machine Model dmc sd 60 RCS 135 Technical Data: Working width 1,350 mm Min./max. working height 4-170 mm Abrasive belt width 1,370 mm Abrasive belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (HP) Feed speed 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual adjustment of working height - Motor power, 1st unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers Codpfx Astwqn Sof Tepu - Kickback protection at the infeed before the first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at the infeed and outfeed of the worktable - Feed belt with two speeds: 4.5 / 9 m/min with gear motor - Automatic belt centering Includes the following special accessories: 1x "B" version for RCS with: pneumatic activation/deactivation of the roller at 1st unit “R” + pneumatic activation/deactivation of the roller at 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic activation/deactivation of the sanding pad unit + electronic programming unit “LOGIC 50” + electronic height adjustment 1x CE safety regulations 1x roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1x "RA" diagonal-ribbed steel contact roller, 1st unit 1x main motor 18.5 kW (25 HP)

Sąlyga: geras (naudotas), Automatinis storio obliavimo staklės medienai, stalių dirbtuvėms, individualių baldų gamybai, baldų fabrikams, lentpjūvėms, medžio apdirbimo cechams, medinių langų rėmams, laivų statykloms, plastikui, kompozitinėms medžiagoms ir įvairioms kitoms reikmėms – CE standartas. Techniniai duomenys: TERSA velenas su 4 peiliais Darbinis plotis: 520 mm Didžiausias darbinis aukštis: 250 mm Cpodpfx Aox Ivfrjf Tju Mažiausias darbinis aukštis: 3 mm Mažiausias ruošinio ilgis: 210 mm Automatinis stalo pakėlimas Padavimo greitis: 5-8-12-18 m/min Variklis: 5,5 AG Siurbimo angos skersmuo: 150 mm Bendri matmenys (mm): 1050 x 1000 x 1050 h Svoris: 650 kg

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), Saw blade diameter: 750 mm, blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Cjdpfx Asurwy Asf Tspu

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, garantijos trukmė: 6 mėnesiai, Sertifikuota DGUV iki: 11/2026, įvesties srovės tipas: Oro kondicionierius, bendras ilgis: 700 mm, bendras plotis: 800 mm, bendras aukštis: 1 050 mm, valdymo įtampa: 24 V, įėjimo dažnis: 50 Hz, reikalingas aukštis: 1 050 mm, vietos reikalavimas ilgis: 700 mm, reikalingas plotis: 800 mm, Duonos pjaustyklė Treif Primus 400 Treif Primus 400 „Premium modelis“ Diskinių peilių mašina Nerūdijančio plieno konstrukcija Cpjdoxp Uhfjpfx Af Tsu Peilis naujai pagaląstas ir padengtas Puikus pjūvis jūsų duonai Valdymas su easy one sukamu reguliatoriumi Pjūvio storio reguliavimas nuo 4 iki 24 mm Išmatavimai: 800 x 700 x 1050 mm (PlxGxA) Tvirta technika 230V prijungimas, paruošta eksploatacijai Naudota, išvalyta mašina Su garantija ir atsarginių dalių aptarnavimo paslauga Kokybė iš specializuotos įmonės! Pasinaudokite daugiau nei 35 metų patirtimi! Pasirinktys: Techninės priežiūros sutartis Atsarginis peilis E-box Aptarnavimo paketas Pristatymo paslauga Instrukcija ir paleidimas Apsilankykite mūsų didelėje duonos pjaustyklių ekspozicijoje!

Sąlyga: naudotas, Gamybos metai: 2000, Pjovimo plotis: 92 cm Įdėjimo gylis: 92 cm Maksimali įdėjimo aukštis: 12 cm Cpjdpfsx Dc Txsx Af Tsu Mašinos numeris: 72739

Sąlyga: naudotas, Gamybos metai: 2023, Used machine Year of manufacture: 2023 Codpfx Aow E Ty Usf Tjpu Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt roller, 2nd belt pad - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Sanding pad width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Feed conveyor with infinitely variable speed adjustment: 4–20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation “Eco Gear Patent System” - 1 pcs. drum brake for belt stop - Pivoting roller for belt tension - 3 pcs. pressure rollers with rubber coating - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 pcs. roller conveyors, each with 2 rollers at infeed and outfeed - 1 extraction nozzle Ø 160 mm - Automatic table positioning - New patented belt oscillation system - No valves - No light barriers - Not sensitive to dust - Energy-saving, environmentally friendly system - Since 2008, the machine model with this system has been operating continuously without lateral belt run-off! - Incl. Unitek belt motor 14.7 kW instead of 11 kW (Promoter) - Incl. Unitek pneumatic sanding pad with control synchronized to feed speed Availability: short-term Location: Saxony-Anhalt

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, 2 sanding units with inverter pre-arrangement for 3rd unit Cpsdpfx Ajwqrtqef Teu vacuum table working width 950 mm