Highl. Suolų bakstelėjimo mašina + plokštė

DESOUTTER RO 300

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Ratų skersmuo – maks. 10 – 330 mm Ratų plotis 180 mm Modulis – maks. 7 Modulis – min. 0,5 Tvirtinimo ilgis 420 mm Dantų skaičius 10 – 600 Nuolydžio kampas – maks. +/- 45° Apsisukimų dažnis 1100 – 1900 aps./min Dusdpow I Hq Dsfx Ac Djr Šlifavimo disko skersmuo 280 – 350 mm Šlifavimo disko plotis 84 – 104 mm Staklių svoris apie 5,1 t Reikalinga erdvė apie 4,5 x 6,0 x 2,3 m

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 Duedpfsv Ab Dqsx Ac Djr - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), Gauge (track width) approx. 20.0 m Dodpfx Aceqfc Ege Deur Lifting height approx. 8.0 m Manufacturer/Refurbishment: HILGERS/TEICHMANN Conversion/Refurbishment: 2000/2023 Crane equipped with: - Double-rail trolley with 4-corner rope layout - Magnet system prepared - Radio remote control - Optional with magnet beam or spreader

Būklė: naudotas, Gamybos metai: 1970, Pressure: 63 t Dujdscxxx Hjpfx Ac Der Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Būklė: geras (naudotas), Gamybos metai: 2000, Ram stroke – max. 2 – 300 mm Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 spm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Djdpfxsuayibe Ac Deur Space requirement approx. 2.5 × 1.5 × 2.2 m The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of the cutting speed with constant return speed, even during operation - Simple clamping of workpieces using standard clamping tools, no additional tool holders required - Maximum dimensional accuracy thanks to self-centering, centrally positioned tool holders - Feed can be adjusted during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable

Gamybos metai: 2001, būklė: naudotas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Modelis: Amada HFE M2 220t 4m, 8 ašių lankstymo staklės Pagaminimo metai: 2012 Spaudimo jėga: 220 tonų Didžiausias lenkimo ilgis: 4280 mm Eigos ilgis: 200 mm Prispaudimo greitis: 1–100 mm/sek. Lankstymo greitis: 1–10 mm/sek. Sugrįžimo greitis: 1–100 mm/sek. Alyvos talpa: 195 l Variklio galia: Svoris: 17 450 kg Matmenys Staklių ilgis: 5070 mm Staklių plotis: 2075 mm Staklių aukštis: 3085 mm Atstumas tarp šoninių rėmų: 3760 mm Sijos plotis: 180 mm Dedsv S U Izepfx Ac Deur Stalo aukštis: 960 mm Atvira aukštis: 470 mm Gylis (gargždas): 420 mm

Būklė: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Dedpfx Acst Hw Iis Dsur Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Dujdpopm U U Nsfx Ac Dsr Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 15 996 h, įėjimo įtampa: 400 V, bendras svoris: 6 750 kg, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Duedpfx Ajtwliwsc Djr Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!