Svirtinės plokščių žirklės

Rogi HS6

Sąlyga: naudotas, 4,000 linear meters of construction profiles, C-shape, galvanized Used goods, in good condition, see pictures Length per piece: approx. 12 m Profile: 110x90 mm Material thickness: approx. 3 mm Negotiable price: €4.90/linear meter net ex stock Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. Ncedpfx Afour Ikro Iol (Subject to prior sale and changes or errors in technical data, information, and prices! Please see our terms and conditions. All prices excl. VAT ex stock.)

Sąlyga: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: Ncodpowzmcbsfx Af Ijl PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, mašinos/transporto priemonės numeris: SI73, Technical Data: 1x Demag KBK 1 Column-Mounted Slewing Crane, SWL 250KG Safe working load at full outreach: 250KG / 0.25t Height: approx. 2.83m Underside of jib: approx. 2.3m Outreach: 3m Hook height: approx. 1.85m Total weight: approx. 400kg, including anchor plate (71x71cm) Njdpfjwv N Ezex Af Iscl Equipped with Demag PK Chain Hoist 250kg Including bolts, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available with load capacities from 80kg to 5000kg—please enquire See pictures Shipping by freight forwarder or collection by appointment only

Sąlyga: naujas, Wisniowski Industrial Sliding Gate 6 x 2 m List price: €16,800 Brand: Wisniowski Description Opening width: approx. 600 cm Leaf length: approx. 800 cm Leaf height: approx. 200 cm Includes photoelectric safety sensor and 1 remote control. Sliding direction from the street side: right, without galvanized base. Including motor and keys. Color: black Ncedpfx Afsh I Nvbe Iel Photos for reference Item condition: new You can find more new and used items in our shop! International shipping costs on request!

Sąlyga: labai geros būklės (naudotas), Note: The images are for illustrative purposes to show the material. Ncodstk Ikmepfx Af Iel - The workbench frames are picked and packed unassembled; - The production time is generally approx. 3 to 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x square tubes, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profiles, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Chipboard depth: approx. 850 mm Surface: possibly coated (may be two-piece) 08x mounting brackets, new Version: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outer: approx. 250 mm Hole spacing inner: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-tapping screws, new Version: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any requested delivery or shipping of this item is subject to additional charges. These can be individually inquired with us depending on the place of delivery and scope of supply.

Sąlyga: naujas, Pagrindiniai matmenys: Plotis: apie 1.725 mm Gylis: apie 750 mm Aukštis: 750 - 1.250 mm reguliuojamas Komplektą sudaro: 01x Darbo stalo rėmas, naujas Medžiagos spalva: pilka Stalo rėmo kojos: 700–1.250 mm reguliuojamos 01x Stalčių spintelė, nauja Korpuso spalva: pilka Durų spalva: mėlyna Su užraktu: taip Stalčių skaičius: 3 vnt. Stalčiaus aukštis: 115 mm 01x Darbo paviršius, naujas Medžiaga: daugiasluoksnė fanera Medžiagos storis: 38 mm Bendras plotis: 1.725 mm Bendras gylis: 750 mm Galimas pristatymo laikas: 10–12 savaičių Kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Njdpfxov Tm Ice Af Ijcl Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Šis daiktas siūlomas tik atsiėmimui. Papildomas transportavimas ar siuntimas susijęs su papildomomis išlaidomis, kurios priklausomai nuo pristatymo vietos ar apimties gali būti tikslinamos individualiai.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: BO844, DEMAG KBK Overhead Crane Runway with Dimensions Approx. 8x5.5m (5.5m Bridge) Multiple units of this crane available! Load capacity / Lifting capacity: 500 KG - 0.5t Technical specifications of the system: Crane runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, endplates, brackets/hangers, etc. Crane features internal power feed Including 500KG Demag chain hoist - lifting height approx. 4m Crane is disassembled and available immediately Used condition, see photos Ncsdpfxeupvycs Af Isl Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems available as well. Load capacities from 125KG to 1600KG Please inquire about your custom crane runway with required capacity and dimensions without obligation.

Sąlyga: naudotas, 2,000 linear meters of structural profiles, U-shape Used item, in good condition, see pictures Galvanized Length per piece: approx. 467 cm Profile: 7.5/8 cm Material thickness: approx. 3 mm Weight per piece: approx. 43 kg Asking price: €4.90 net/lfm ex stock Available individually or in packages One package consists of 20 pieces – approx. 93.4 lfm Items are in stock. Transport available on request. Inspection possible by appointment at any time. Further information available on request. Constantly over 5,000 lfm of pallet racking from various manufacturers in stock. Njdpfx Afeulwiqe Ijcl (Specifications, information, and prices subject to change and errors excepted. Intermediate sale reserved! See our terms and conditions. All prices excl. VAT, ex stock.)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System comprises: - MF Inverter: MIDISpot Vision QSVM 9000/12000T - MF Transformer Handheld Gun: ELMA Vision CM - Serial Numbers: 9420357 IMA, 9420363 IMA - Standard: EN500063 - Condition: Used, technically in perfect working order Description For sale is a complete MF spot welding system from ElmaTech, featuring a powerful medium-frequency inverter (QSVM 9000/12000T) and the corresponding MF transformer handheld gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Its typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g. KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Ncodpfxox Au Tnj Af Isl Technical Specifications – MF Inverter QSVM 9000/12000T Output - U₀: 560 V - Frequency: 10 kHz - Current range: 0 – 200 A - Duty cycle: 5 % Input - Voltage: 3~ / 400 V - Frequency: 50/60 Hz - Power: 75 kVA - Protection class: IP 21 Additional Information - Insulation class: F - Cooling method: WF (water-cooled) - Weight: 95 kg Technical Specifications – ELMA Vision CM (MF Transformer Handheld Gun) Output - U₂₀: 12.5 V - Current range: 0 – 15 kA - Energy / I₂max: 15 kAs Input - Uₙ: 560 V - Frequency: 10 kHz - Duty cycle: 50 % - Power: 30 kVA - Protection class: IP 21 Additional Information - Weight: 35 kg - Insulation class: F - Cooling method: WF (water-cooled)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Handheld Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Description This welding system from ElmaTech consists of a high-performance medium frequency inverter (QSVM 9000/12000T) and an MF transformer handheld gun (ELMA Vision VM). It is specifically developed for professional resistance spot welding and is ideal for: - Automotive and body construction Nodpfsx Dch Aex Af Iscl - Metalworking - Robot-assisted welding cells - Manual and semi-automatic spot welding workstations The medium frequency technology (10 kHz) provides: - High energy efficiency - Stable welding results - Reduced electrode wear - Optimal process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Data Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Handheld Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Welding energy: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50 % ED Protection class: IP 21 Additional Data Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications - Spot welding of steel and stainless steel - Body construction / vehicle manufacturing - High-cycle industrial production - Robot-assisted welding processes - Repair & rework stations