Dažų parduotuvė

Pony Luxury Coating M&K Pony 7000

MAIN STANDARD
Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained.

FUNCTIONAL PRINCIPLES OF THE BOOTH
The processes within the booth are operated using a control panel that manages the following steps:

PAINTING PROCESS
During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release.

FLASH-OFF PROCESS
After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth.

DRYING PROCESS
In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required.

COOLING PROCESS
After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically.

ELECTRICAL AND ELECTRONIC EQUIPMENT
These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture.

Electrical Equipment and Control Panel:
• The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors.
• Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices.
• Electrical wiring is designed to allow for booth relocation if necessary.
• Operating equipment runs on 380 V 50 Hz, while control units use 220 V.
• Booth operating time can be monitored on the electronic control panel for easy maintenance tracking.
• Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel.
Nedpfxswzmcbe Acpola
• Users can monitor and adjust the drying time using the heating thermostat and time relay.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.