Pony Luxury Coating M&K Pony 7000 pirkti naudotą (89 364)

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. Bwsdpfxowzmcbo Afqjp DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 3 500 mm, bendras ilgis: 7 050 mm, bendras plotis: 4 100 mm, tūrio srautas: 36 000 m³/val, temperatūra: 80 °C, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), Įranga: apšvietimas, kabina, Paint and Drying Booth It is the centerpiece of your entire painting process: the combined paint and drying booth. (Optionally also available as a separate paint booth with a separate dryer.) Here, we rely on full-surface ceiling filters and, optionally, a full-surface floor extraction system with drive-over grating or wall extraction at the position of your choice. Bedsxa H Ewjpfx Afqowp If you would like to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converters, we are pleased to offer you a sectional control system. This allows you to activate only the section where the parts are located—in the case of repair painting or partial booth loading (for example, if you only want to paint add-on parts). You benefit from being able to operate with reduced air volume, maintain the same quality standards, and save energy—and, ultimately, real money. Just ask us—we would be happy to demonstrate these options to you in more detail. Do you have questions or suggestions? We're happy to assist you.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperatūra: 230 °C, šildymo galia: 30 kW (40,79 AG), vidinis ilgis: 2 500 mm, vidinis plotis: 1 505 mm, ✈️ Plus shipping costs – shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate use! Bwjdpfx Aewfgbrofqop ✳️Preserve your liquidity! We offer various financing options to ensure your investment has the best chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder Curing Oven with Electric Heating System - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating power: 30 kW/h ✔️ Blower: 3000 m3/h, 80mmSS ✔️ Circulation fan power: 1.5 [kW/h] ✔️ Total: 35 kW/h ±10% ✔️ Digital temperature control, adjustable up to 220°C ✔️ Sandwich panels: Inside: 1.5 mm galvanized steel, Outside: 1.5 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function adjustable ✔️ Signal tone sounds at the end of curing cycle ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet painting, plastics processing, or other thermal applications – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum flexibility for loading • Compatible with overhead rail systems • Optional shelf system available for small batch production _____ ⚙️ Intelligent controls – tailored to your needs ✅ PID control (optional) for precise temperature management ✅ Touchscreen control panel & smartphone operation 📱 (optional) ✅ Weekly & monthly reports at the push of a button (optional) ✅ Timer function: freely programmable from 10 minutes up to 24 hours ⏲️ ✅ Automatic shut-off after process completion _____ ♨️ Ramp-heating mode (optional) Control temperature profile and holding times precisely, for example: • Reach target temperature within a defined time • Maintain desired temperature for set period • Controlled cooldown to target temperature • Automatic notifications for process events _____ 🛡️ Safety comes first 🟢 Safety sensor for overheating prevention 🟢 Automatic shut-off in case of fault 🟢 Acoustic warning signals on errors 🟢 Solvent & smoke extraction via automatic ventilation _____ ⚡ Customised energy & heating system 🔥 Also available as a high-temperature version up to 400°C (optional) _____ 🧠 No need for repeated settings! The oven stores your process parameters – batch by batch. This saves time and avoids mistakes. _____ 📢 And the best part: If you have special requirements – we also build custom ovens according to your specifications! Contact our expert team for personal consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 982 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 100 mm, tūrio srautas: 18 000 m³/val, garantijos trukmė: 12 mėnesiai, Extraction wall with 18,000 m³/h capacity MAX power consumption: 5 kW/h Electric motor: 4 kW Bedpfx Aewz Ic Njfqewp Air unit: 18,000 m³/h Nicotra ADH 400 You can find the complete description in the attachment to this listing.

Būklė: naujas, Powder Coating Systems Bsdexa Hzxepfx Afqjwp For years, powder coating has been evolving as an alternative to wet painting and has recently gained even greater importance due to its lower environmental impact, with no solvents or paint sludge produced. Especially the possibility of powder recovery enables an exceptionally high level of efficiency. For the user, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface, which is significantly more impact-resistant than what paint can provide. Additionally, post-processing such as sanding or drilling coated parts is easily possible without the coating chipping off. Pony Luxury Coating powder coating systems thus offer you tangible benefits: they are efficient, environmentally friendly, and, of course, unbeatable in terms of flexibility, as always. We achieve this with various system types. Manual Powder Coating Systems Systems that are operated manually are the ideal solution for demanding and complex workpieces. Trained staff can flexibly adapt to new conditions and continually changing product sizes. Flexibility is the top priority and is also complemented by an attractive entry price into the world of powder coating. Large-Volume Powder Spray Booths No matter how large and challenging your workpieces are, our systems are bigger! Due to the high demands in the commercial and utility vehicle sectors, powder coating has established itself here as the perfect solution. To accommodate increasingly larger components, we offer our large-volume powder booth, which allows for unrestricted manual coating and, in combination with a conveyor system, can handle workpieces of any size. Automatic Powder Coating Systems If your focus is on high throughput and rapid process speed, then an automated powder coating system is the future for your operation. Coupled with a conveyor system, light grids precisely detect and, as a result, perfectly dose the powder quantity to ensure optimal efficiency. Of course, the system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Adhesion Water Dryers The perfect finish to a powder coating process: the curing oven. Equipped with the highest insulation class, our unwavering efficiency continues in this area as well. Precise temperature control also allows use as an adhesion water dryer, enabling pre-treated materials to be dried after pre-cleaning. Additionally, temperatures up to 250°C are possible, allowing for use as a tempering oven, for example, for hot-dip galvanized materials. The typical use as a powder curing oven is, of course, easily accomplished. Optimal air distribution and a visualized control panel prevent burning and even allow for simultaneous curing of different color tones. Do you have questions or suggestions? We are happy to help you!

Būklė: naujas, Įranga: kabina, Stationary Small Spray Booth Dixi █████ Perfect and uniform coating of small parts. The extraction system ensures optimal results in minimal space. Optionally equipped with a rotary table or a wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side panels effectively limit overspray distribution, making it possible to work in small areas without contaminating surrounding spaces. Integrated lighting is also available. In addition, thanks to its low weight and minimal connections, it can be relocated to a new site in no time, maintaining your operational flexibility at all times. The system comes fully pre-assembled. Your Advantages With its compact design, flexible dimensions, and adaptable accessories, this unit offers a wide range of applications. The sophisticated modular system has a minimal footprint, making it suitable for use in any space. The various filter media and stages ensure highly efficient operation and make filter changes a matter of minutes. Bodpfx Afjxa Hx Roqjwp Application and Safety Thanks to the use of ATEX-certified explosion-proof motors, processing both water-based and solvent-based coatings is possible without issue. Optionally, it can also be configured for adhesive spraying. The large filter surface ensures uniform extraction throughout the booth.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 3 400 mm, bendras aukštis: 2 210 mm, bendras plotis: 1 505 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, temperatūra: 250 °C, šildymo galia: 30 kW (40,79 AG), vidinis ilgis: 2 500 mm, Įranga: avarinis stabdymas, ✈️ Plus shipping costs – shipping available on request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – delivered fully assembled, ready for immediate use! ✳️Preserve your liquidity! We offer a variety of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ PEF-2.5 POWDER CURING OVEN ELECTRIC Internal WIDTH: 1,505mm HEIGHT: 1,800mm (from the air duct) Internal LENGTH: 2,500mm ➢ Thermoblock unit dimensions: 785x1800x2210mm, Heating output: 30 kW/h, Circulation fan: 1.5kW/h – 1 pc., Exhaust fan: 0.54kW/h. ➢ Double-leaf door with thermal insulation and silicone sealant. ➢ Guide rails for trolley carts are manufactured to floor plate specifications. ➢ Specially developed air duct ensures homogeneous air distribution in the curing oven. ➢ Electrical control components from Siemens and Schneider. This curing oven is delivered without a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and function of the heating unit are adjustable. At the end of the program, an audible and visual signal is triggered by the buzzer. ➢ Includes one product transport cart with cast wheels inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (measured including the fan) ➢ Teflon filter: 4 pcs. ➢ Filter suction fans: 4kW x 1 pc. (6,000m3/h – 200mmSS) ➢ 36W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for regulating air intake and pressure blasting ➢ DELTA frequency inverter ➢ Heavy-duty casters under the coating booth. ➢ Additional filter at fan outlet. ♨️ Ramp-Heating Mode (optional) Precise control of temperature profile and hold times, e.g.: • Reach target temperature in defined time • Hold at desired temperature • Controlled cooldown to target temperature • Automatic notifications for process events _____ 🛡️ Safety First 🟢 Safety sensors to prevent overheating 🟢 Automatic shutoff in case of failure 🟢 Audible warnings for errors 🟢 Solvent & fume extraction via automatic ventilation _____ ⚡ Customizable energy & heating system 🔥 Also available with upgrade to 400 °C for high-temperature processes (optional) _____ 🧠 No repeated adjustments needed! The oven stores your process parameters batch by batch. Save time and avoid errors. _____ 📢 And best of all: If you have special requirements – we also build custom ovens to your specifications! Contact our team of experts for personal consultation! _____ Bsdewdtfuepfx Afqjwp ☀️ 2-YEAR WARRANTY ☀️ Request more information

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! Bwsdpfx Afswfhu Hsqop PROFESSIONAL POWDER COATING HAS NEVER BEEN EASIER! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – all with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited offer before it's gone! PONY Luxury Coating – UNMATCHED QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No Chinese goods, but highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + Powder booth + Powder coating gun Complete Starter Package PEF2.5+ ⭐ Powder Oven with Electric Heating ✔️ INTERNAL WIDTH: 1,505 mm ✔️ HEIGHT: 1,800 mm (from the air duct) ✔️ INTERNAL LENGTH: 2,500 mm ✔️ Dimensions of the thermoblock unit are 785x1800x2210 mm, heating power is 30 kW/h, one recirculation fan 1.5 kW/h – 1 unit, one exhaust fan 0.54 kW/h. ✔️ Double-leaf door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are made to the dimensions specified on the floor plates. ✔️ Specially designed air duct ensures homogeneous air distribution in the curing oven. ✔️ Components for electrical switchgear are Siemens and Schneider. This curing oven does not include a PLC system. PLC is optionally available. ✔️ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an acoustic and light signal sounds from the buzzer. ✔️ Additionally, a product transport trolley with cast wheels is included inside the oven. ⭐ Powder Booth ✔️ DIMENSIONS: 800x1930x2200 mm (including fan) ✔️ Teflon filter: 4 pcs ➢ Filter extraction fan: 4 kW x 1 unit (6,000m³/h – 200mmSS) ✔️ 36W LED lighting x 1 unit ✔️ Bottom drawer x 1 unit ✔️ Control panel for managing air intake and pressure blasting ✔️ DELTA frequency inverter ✔️ Heavy-duty casters on the coating booth ✔️ Additional filter at the fan outlet ⭐ E-Coat+3 Master Powder Coating Gun with Multicolor (Vibration Table) Request now – Prepare your company for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines have CE certificates, and ATEX certificates for the necessary machines.☀️

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. Bodpfx Afswzl Hxoqswp * COOLING PROCESS: After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Būklė: naudotas, rida: 190 447 km, galia: 112 kW (152,28 AG), pirmoji registracija: 10/2000, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, Įranga: kranas,

Būklė: geras (naudotas), Techniniai duomenys apie padėklų stelažo traversą: Bedpfxeynlras Afqewp Stelažo sistema: SSI Schäfer Tipas: PR 600 Komplektacijoje yra: 01 vnt. padėklų stelažo traversa, naudota Medžiagos spalva: geltona Skerspjūvio profilis: 60 x 40 mm Traveros tipas: TRV1-270-064-30 CE Vidinis plotis: 2.700 mm Tvirtinimo kabliukai: 5 HK (kabliai) 02 vnt. saugos kaiščiai, naudoti Apdaila: pilnai cinkuota Skirta ilginių apsaugai nuo nepageidaujamo iškritimo Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendroji informacija apie prekę: Ši prekė siūloma tik atsiėmimui. Papildomas transportavimas arba išsiuntimas galimas už papildomą mokestį, kurį galima sužinoti atskirai pagal pristatymo vietą ar kiekį.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Parduodami veikiantys DUJINIAI DEGIKLIAI G70, 7000 kW, su valdymo spinta ir valdymo bloku, dujų trasa DUNGS DN 80.\n WEISHAUPT\n Tipas: G70/1-B\n Versija: ZM-LN\n Galia: 700-7000 kW\n Pagaminimo metai: 2011\n- Pristatymas galimas pagal pageidavimą\n- Visi techniniai duomenys matomi nuotraukose\n\nPageidautinas pardavimas prekybininkams, įmonėms arba eksportui.\nVisa pateikta informacija yra be garantijos, galimi netikslumai ir tarpinis pardavimas.\nPardavėjas neprisiima atsakomybės už spausdinimo ar duomenų perdavimo klaidas. Bsdpfx Aeign Iwofqjwp

Būklė: visiškai atnaujintas (naudotas), baterijos talpa: 930 Ah, akumuliatoriaus įtampa: 80 V, bendras aukštis: 880 mm, bendras ilgis: 2 460 mm, bendras plotis: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Includes Aquamatic (automatic filling system) + Includes end cell connectors & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 2,460 mm Width 735 mm Height 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Bwjdpsy Rnpuefx Afqep Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available, please enquire. Transport possible.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, Mašina atskirai pastatoma Didelio formato Šepečių stalas Purkštimo darbo valandos: 59 000 val. Bwjdszdrnrepfx Afqsp

Būklė: naudotas, rida: 9 999 km, galia: 180 kW (244,73 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, bendras svoris: 3 000 kg, pirmoji registracija: 06/2023, spalva: pilkas, sėdimų vietų skaičius: 7, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas,

Būklė: naujas, Weiss 178377 šlifavimo velenas 21 kW / 7000 aps./min = 0001, nenaudotas, 100% veikiantis, pristatymo apimtis pagal nuotraukas. DĖMESIO: Dėl pakavimo ir transportavimo išlaidų prašome teirautis atskirai! Bedpfx Afsy Rcmzeqswp

Būklė: naujas, Weiss 178377 šlifavimo velenas 21 kW / 7000 aps./min = 0002, nenaudotas, 100% veikiantis, komplekte pagal nuotraukas DĖMESIO: Dėl pakavimo ir siuntimo išlaidų prašome teirautis atskirai! Bsdoy Rcm Uopfx Afqjwp

Būklė: paruoštas naudoti (naudotas), SER C100 FA-172 šlifavimo velenas 7000 aps./min 1,3 kW, naudotas, su įprastais naudojimo ženklais, 100% veikiantis, komplektacija pagal nuotraukas. Bsdpfx Aex Eq Ipjfqjwp

Būklė: naudotas, rida: 282 243 km, galia: 368 kW (500,34 AG), pirmoji registracija: 10/2022, kuro tipas: dyzelinas, tuščias svoris: 8 876 kg, didžiausias leistinas svoris: 9 124 kg, bendras svoris: 18 000 kg, ratų bazė: 3 750 mm, kita apžiūra (TÜV): 05/2027, spalva: mėlyna, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 2, Gamybos metai: 2022, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, suodžių filtras, sėdynės šildytuvas, vairo stiprintuvas,

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, valdiklio modelis: Rexroth IndraMotion MTX, lazeri tipas: CO₂ lazeris, lazerio galia: 4 000 W, perforavimo jėga: 22 t, Įranga: CE žymėjimas, apsaugos šviesos užtvara, purkštukų keitiklis, Standard equipment: Bedpfjza A Hlsx Afqewp Machine - Working area: 3050 x 1550 mm - Robust, easily accessible C-frame - Precision coordinate guideways for high-accuracy processing - Linear tool magazine with 21 tool stations and 4 clamps - Maintenance-free three-phase drives - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - Two finished part bins - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejector cylinder for laser parts - Quick flap for laser parts 500 x 500 mm incl. sensor for parts chute - Liftable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Chiller unit - TASC laser control - Enclosed beam guidance - Beam tube ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal quick-change cutting head system UTI with bus connection - ControlLine Programming - Advanced workshop programming (TruTops via network access) Punching station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable hold-down with manually adjustable hold-down force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Bulge detection - Flap for punched parts 500 x 500 mm incl. sensor for parts chute - Attainment of fill level height in the punching console - Level monitoring for thread forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - External operating panel with 15" TFT touchscreen - Hard disk with 160 GB capacity - Integrated technology data - Teleservice via Internet - Integrated e-Shop - Programmable cutting gas pressure - Automatic shutdown - Production planning Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual-beam light barriers - Monitoring systems including gas pressure, temperature, coolant - Emergency stop - Stray radiation protection - Compact extraction unit - TruFlow 4000 incl. LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually accessible clamps - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting bin - Brush tables with loading and unloading aid - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Vacuum sensor for each cup - Sheet thickness gauge for double-sheet monitoring - Automatic clamp closing for the machine - Central lubrication - Simultaneous loading and unloading with SheetMaster - Unloading monitoring GripMaster, special configuration 4m: - Scrap grippers with sensors - Scissor lift table 400 mm

Būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: ESD EG 64/32 HG, 7,000 pcs Plastic Crate 600x400x320mm ESD EG 64/32 HG Bjdpfxjwl Dits Afqjwp Auer or UTZ/RAKO Used goods, in very good condition, almost as new, see photos. Crates may have stickers, but they are easily removable! Contents: 66 liters Load capacity per crate: Stacking capacity: Type: ESD EG 64/32 HG External length: 60 cm / Internal length: 37 cm External width: 40 cm / Internal width: 27 cm External height: 32 cm / Internal height: 31.5 cm Stacking height (usable inside height): 30.3 cm ESD stacking containers 60x40x32 cm Color: Black Completely closed containers Dimensionally stable and robust Stackable 40 units per pallet Negotiated price: €11.00 net ex-stock Sales price: €11.00 net ex-stock with a minimum purchase of 1 pallet (40 pcs) * Goods in stock. * Transport and assembly possible upon request. * Viewing always possible by appointment. * Further information on request. More than 1,000 linear meters of pallet racking from various manufacturers in stock. Also over 100,000 plastic bins in stock. Transport containers or storage/picking bins. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex stock.)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, lazerio galia: 4 000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guide for high-precision machining - Linear tool magazine with 21 tool stations and 4 clamping claws - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Footswitch for clamping claw closure - 2 bins for finished parts - Automatic shutdown system Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guidance - Beam pipe ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus communication - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punch - Spray lubrication for punch - Slug extraction for punching - Bulge detection - Flap for punched parts 500 x 500 mm - Level monitoring of the punching console Control - Open control based on Bosch Rexroth IntraMotion MTX - Operator panel with 15" TFT touchscreen - Program management and 80 GB storage - Diagnostic function with laser logbook Bwsdpfxey Saqgo Afqjp - Integrated technology data - Teleservice Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Fast hydraulic shutdown - Protection against stray radiation - Compact extraction system - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tipping bin - Active die - Ejector device for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Bulge detection

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, valdiklio modelis: Rexroth IndraMotion MTX, lazeri tipas: CO₂ lazeris, lazero valandos: 980 h, lazerio galia: 4 000 W, perforavimo jėga: 22 t, Įranga: CE žymėjimas, apsaugos šviesos užtvara, purkštukų keitiklis, Machine - C-frame - Coordinate guide system - Linear magazine with 25 slots for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot switch for clamp closing - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - High-speed flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser Bwodpoy Sappsfx Afqjp - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Enclosed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level height in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Automatic shutdown with wake-up function - Production planning Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Dual-beam safety light curtain - Monitoring system for gas pressure, temperature & cooling water - Emergency stop for drives - Warp (bulge) detection - Protection against stray radiation Extended Standard Equipment: - Network installation via remote support - Cooling unit (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 good parts containers - Chip container - 40 used RTC cassettes + die plate Punching Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread breakage monitoring - Marking/fast bead forming - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format recognition - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-dampened installation - Chip conveyor with tilting container - Start foot switch incl. rear-view mirror - Brush tables with loading and unloading assistance - Blowing device for small parts - CO2 extinguishing system for the compact extractor - Connection piece for exhaust duct (compact extractor) MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous main-time loading and unloading - Peeling system incl. positioning assistance for oversize formats - Additional positioning assistance for medium-size format - Additional positioning assistance for large format - First extension package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets lengthwise ToolMaster Linear 54 stations with main-time parallel setup - Safety devices for warehouse connection incl. 2nd light curtain circuit - Warehouse interface

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 300 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 000 mm, veleno greitis (maks.): 1 800 aps./min, stalo ilgis: 7 000 mm, TECHNINĖS DETALĖS X ašies eiga: 5.300 mm Y ašies eiga: 1.500 mm Z ašies eiga: 2.000 mm Valdymas: HEIDENHAIN TNC 415 B Stalo matmenys: 7.000 x 1.000 mm Įrankių tvirtinimas: SK 50 Veleno apsukos: 12,5–1.800 aps./min Veleno variklis: 22 kW Padavimo greitis: 6–10.000 mm/min Greitaeigis judesys: 15 m/min Įrankių keitiklio vietų skaičius: 24 STAKLIŲ DETALĖS Bendras galios poreikis: 70 kW Išmatavimai ir svoris Reikalinga erdvė: apie 8,7 x 4,7 x 4,1 m Staklių svoris: apie 30 t ĮRANGA Elektroninis rankinis valdymo ratas Automatinė vertikali/horizontali frezavimo galvutė, pasukama 2 x 180° Frezavimo galvutė galinėje ašyje automatiškai pasukama 72 x 5° Automatinis įrankių keitiklis (ATC 24) Aušinimo skysčio įranga Padidinta skersinė eiga (Y ašis) 1.500 mm Bwsdpfx Ajy Dg I Nsfqjp Padidinta vertikali eiga (Z ašis) 2.000 mm Įvairi priežiūros dokumentacija

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Filtravimo įrenginys, kondicionierius, oro kondicionierius, ventiliatorius, pūstuvas, elektros variklis, pūstuvas, elektros variklis, pūstuvas, radialinis ventiliatorius, avarinis ištraukimo ventiliatorius, dūmų ventiliatorius, ašinis ventiliatorius, ašinis ventiliatorius, ašinis ventiliatorius, ašinis ventiliatorius -Filtravimo blokas (paimtas iš oro kondicionavimo sistemos) -Gamintojas: Wolf -Tipas: KG Top 4040 -Galingumas: ventiliatoriai 4x 5,0 kW -Oro srautas: 47000 m³/h -Matmenys: 2950/2800/H2800 mm Bwsdpfx Asxd Unhefqop -Svoris: 1400 kg