Dažų džiovinimo vežimėlis

Rehnen Varioflex

Būklė: naujas, Gamybos metai: 2026, Rehnen Shelf Trolley Varioflex Flexible Paint Drying Trolley Robust tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel castors Load capacity: 400 kg Support tubes galvanized Optional: Additional rack Length: 200–2000 mm Depth: 870–1180 mm Height: 1980 mm Support tube length: 650 mm Fully extended up to: 1150 mm Clear spacing between tubes: 60 mm Load capacity: 400 kg Available immediately The trolley can also be shipped within Germany for €75 net. Hjdpfx Aobumtiolwst

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), I am selling window sets suitable for CNC window manufacturing centers: Hedpfx Aeg Tumyolwet LEUT wood-aluminium 110 mm Bore 50 mm. Complete set. Very good condition. Available as a set. Also possible to purchase individually.

Gamybos metai: 2022, būklė: naujas, Shelves: 17 Clear spacing between pipes: 60 mm Support pipe length: 650 mm Length: 200 - 2000 mm Hodpfx Aljd Ry I Nowot Swivel castors: 4 pieces, polyamide Depth: 870 - 1180 mm Height: 198 mm Load capacity: 400 kg

Būklė: naujas, - NEW - - Robust tubular frame construction - Extendable from 200 to 2000 mm and can be locked at any desired width - Up to 17 shelves possible on each side - 4 polyamide swivel castors, load capacity 400 kg - Support tubes galvanized Technical data: Hodpovwfvmjfx Alwot Support tube length: 650 mm - Extended up to: 1150 mm Clear spacing between tubes: 60 mm Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Item no. 13-03000001

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Hsdpet Tqy Ejfx Alwet Wood guide at entry for hard, double-sided...

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Hsdpfjv D Rg Dex Alwst Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation Hjdpsvnv Tqsfx Alwst - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Gamybos metai: 2008, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10999, OPIS Hjdjv Dfp Hopfx Alwjt Dvostrana brusilica / brusilica za obradu gornje i donje strane Proizvođač: Löwer Model: DSM 3000 sa povratom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x jedinica za četkanje odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x jedinica za četkanje odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivi dovod, 6/11/16 m/min Pritisak vazduha: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Būklė: geras (naudotas), Gamybos metai: 2012, DEMAG Crane Electric Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Runway (2x3m) The Manulift DCM-Pro was developed for safe and efficient single-handed load handling. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to control both the chain hoist and guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load Capacity: 80 kg Control: GSA Type 4 Travel Range: 3 meters lateral, 2 meters forward/backward Steel beam: included in offer Hjdpfx Ashwd E Njlwst Condition: used Complete factory closure Wide range of mezzanine platforms, pallet racks, shelving units, carousels High-quality industrial machines, lathes, grinding machines, hand tools Find more products – both new and used – in our shop! International shipping costs on request!

Būklė: naudotas, Pakabinama dažymo linija Tecnoaspirazioni, pilnai su pavara, bėgiais ir stulpais. Ilgis apie 220/240 m. Hodpfx Asit Umfelwot