Dažų džiovinimo vežimėlis

Rehnen Typ Varioflex

Būklė: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Bljdpfjwyda Uox Af Aog Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Bodpfxev I Akvs Af Aslg Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Gamybos metai: 2022, būklė: naujas, Shelves: 17 Clear spacing between pipes: 60 mm Support pipe length: 650 mm Length: 200 - 2000 mm Swivel castors: 4 pieces, polyamide Depth: 870 - 1180 mm Height: 198 mm Bledpfx Aod Ry I Nsf Ajg Load capacity: 400 kg

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), I am selling a complete ELBH extraction system. - 2x 15 kW fans - Total capacity: 21,000 m³/h - Recuperation system Blsdpfxeim Ex Ns Af Ajg - Complete ductwork included - Year of manufacture: 2000 Available immediately, only as a complete unit.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, transporto ilgis: 7 500 mm, tūrio srautas: 40 000 m³/val, bendras ilgis: 7 500 mm, consisting of: 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium - electric Installed electrical power for both dryers: approx. 210 kW 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h (heating coil 90 kW) 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Installed electric power: 115 kW Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Output: 1.5 kW; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h PR frost protection for N.1 heating battery, with probe and automatic control of shut-off damper 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives, highly efficient for increased heat exchange thanks to high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet speed max. 32.5 m/sec Overall length: 3,000 mm Usable width: 1,300 mm Total width: 1,783 mm Usable pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Installed electric power: 4.5 kW Machine control via LCD 5.7" touch Bodpfx Afsw H Aw Sj Aslg TT 4000 rod conveyor with double chain, steel guides, and chrome-plated rods. 4. CEFLA TR 3000 Roller Conveyor Motorized rollers coated with PVC Length: 3,000 mm Photoelectric barrier for thin panels, thickness 4 mm (Technical specifications subject to change and errors, prior sale reserved)

Būklė: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir Blsdpfjuf Hx Hsx Af Asg - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Būklė: naujas, Patogus lentynų vežimėlis Varioflex skirtas lanksčiam ir švelniam dažytų ruošinių laikymui. Be to, dėl keturių vairo ratukų galima transportuoti ruošinius. Tvirta vamzdinė rėmo konstrukcija reguliuojama nuo 200 iki 2000 mm. Iš abiejų pusių po 17 vidinių ir išorinių atraminių vamzdžių užtikrina vežimėlio apkrovą iki 400 kg tolygiai paskirsčius svorį. Nuimamus vidinius ir išorinius atraminius vamzdžius galima pasirinktinai išimti ir įstatyti atgal gale. Nenaudojant lentynų vežimėlis užima nedaug vietos. Papildoma įranga: plastiku dengtos atraminės vamzdžiai, papildomas krepšys. Techniniai duomenys: ilgis: 200 - 2000 mm, gylis: 870 - 1180 mm, aukštis: 1855 mm, atraminio vamzdžio ilgis: 650 mm (ištrauktas iki 1150 mm), tarpas tarp vamzdžių: 70 mm, keliamoji galia: 400 kg. Iliustracijoje matomas papildomas priedas (papildomas krepšys). Bodpew I Ux Nofx Af Aolg

Būklė: naujas, The cost-effective Ecoflex rack trolley is designed for space-saving and gentle storage of painted workpieces. Thanks to its four swivel castors, the Ecoflex can also be used for transporting workpieces. Its robust tubular frame construction is adjustable from 200 to 1500 mm. With 17 plastic-coated support bars per side, the trolley can accommodate weights of up to 400 kg with evenly distributed load. The plug-in support bars can be removed as needed and reinserted on the reverse side. When not in use, the rack trolley can be compactly collapsed for space-efficient storage. Length: 200 – 1500 mm Depth: 870 – 1180 mm Height: 1855 mm Support bar length: 650 mm Bjdpfx Ajvwf Ehof Aslg Clear spacing between bars: 70 mm Load capacity: 400 kg

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), I am selling a Cefla Ecolight TLF/BB/4+TTE 4000 2-head, 4-lamp UV curing tunnel, year of manufacture 2001. Working width: 1400 mm, total length: 4.00 m, total power: 74.3 kW. The unit is in very good condition and available immediately. Bedoi Eup Eopfx Af Aelg