Universalios tradicinės įrankinės frezavimo staklės, X eigos diapazonas 0–399 mm pirkti naudotą (112)

Gamybos metai: 1997, būklė: geras (naudotas), Macmon M 100 RE universal milling machine with 3-axis Heidenhain digital readout, from training department. Fixed table, SK 40 spindle taper. Accessories: electric spindle guard, various collets and cutter arbors. Good, fully operational condition, can be demonstrated under power by arrangement. Isdpshgmmzjfx Alrjau

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: neveikiantis, atsarginių dalių donorinis Iaodpsyyaplofx Alrsu

Būklė: labai geros būklės (naudotas), Deckel FP1 AKTIV (3-Axis Active) Machine no. 2102-3240 Year of manufacture: approx. 1988 Travels: X 300 mm Y 150 mm Z 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - Active 3-axis digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axis - Quill adjustment on vertical milling head: 60 mm - Vertical milling head swivels and is horizontally extendable by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication - Machine vice - Various tool holders/collets/tools Required floor space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Videos of the geometry can be provided upon request. Iasdpfx Aoyll A Tjlreu Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Deviation in parallelism Y axis: 0.002 mm (measuring length 150 mm) Deviation in parallelism X axis: 0.01 mm (measuring length 300 mm) Videos of the geometry measurement can be provided upon request. The following components have been renewed: - Gears in the horizontal head replaced and gear shaft new bearings installed - New Z-axis way cover and various add-on parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test performed

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 340 mm, For sale is a conventional milling machine from Deckel, model FP1. Thanks to its compact size, the machine is ideal for quick tasks where space is limited. The machine is in full working condition. Technical specifications: - X-axis travel: 300 mm - Y-axis travel: 160 mm - Z-axis travel: 340 mm - Tool holder: SK40 - Spindle speed: 40–2000 rpm - Control: Conventional - Table size: 600 x 210 mm Iedpfx Alougv Hvorjau - Total power requirement: 2 kW - Machine weight: approx. 0.73 t - Required installation space: approx. 1200 x 1100 x 1600 mm Loading and shipping throughout Europe can be arranged upon request. All prices plus VAT. Viewing is possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing operation? Or are you looking to sell yours? For further information or contact options, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Labai geros būklės, 5 ašių įrankių galąstuvas parduodamas dėl nenaudojimo! Iasdpfxjxw Sxke Alrju

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Įrankinė frezavimo staklė Macmon M 100 NC Bežingsninis apsukų reguliavimas, Įrankio laikiklis SK 40 Iedpfox Hga Dex Alreau Aušinimo įrenginys Eksploatacijos instrukcija

Būklė: naudotas, Weight approx.: 450 kg Dimensions (LxWxH): 1250x1350x1550 mm Y-travel: 300 mm Z-travel: 200 mm X-travel: 350 mm Speed range: 80–2200 rpm Table size: 600x200 mm Description: -) Coolant system -) Machine lamp -) Including machine vice Speeds: 80–2200 (8 steps) rpm Spindle taper: DIN 2078 ISO 30 (draw bolt M12) Working area: 300 x 200 x 350 mm Table: 600 x 200 mm Rapid traverse X, Y axis: 1200 mm/min Ram stroke: 45 mm Max. feed force: 1600 Nm Spindle motor: 1.1/1.4 kW Iaodpfx Asrgvbpolrsu Vertical table: 600 x 200 mm Distance vertical milling spindle – milling table: 20 – 370 mm Distance horizontal milling spindle – milling table: 84 – 434 mm Feed in X-axis (stepless): 20 – 200 mm/min Length: 1250 mm Width: 1350 mm Height: 1550 mm Weight: 450 kg

Gamybos metai: 1992, būklė: naujas,

Būklė: geras (naudotas), Gamybos metai: 1995, Universal Tool Milling Machine Deckel FP 1 – Multiple units available, see pictures Iajdpfx Alstdcfhsreu Model: FP 1 3-axis Heidenhain digital readout Price: from €9,500 excl. VAT Technical Data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps: 8 Feed rate range: 10 – 500 mm/min Feed rate steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we kindly request that you provide full proof of identity, including a valid telephone number and email address, for quotation purposes. Deckel FP1 AKTIV (3-axis active) Machine number: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active 3-axis digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivelable and extendable horizontally by 100 mm - Coolant system (coolant tank integrated in the machine base) - Documentation - Central lubrication Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y-axis: 0.15 mm Iajdpfx Aexpwfgolrsu Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been replaced: - Central lubrication system checked - Heidenhain digital display overhauled - Scraper set installed - LEDs in active display replaced - Oil change performed - Vertical milling head newly mounted - Oil sight glass replaced Price: net, loaded ex-stock

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is a potential investment for you, we request your complete identification, including a correct telephone number and email address, in order to provide a quotation. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel paths: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse, X/Z axis: 1200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Swivel vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axis The machine was partially overhauled by a specialist company several years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray unit Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Iajdpfx Ajxyc Tkelrou Condition: Good to very good, from training workshop Available from March 2026

Būklė: labai geros būklės (naudotas), Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete identification, including a correct phone number and email address, in order to provide you with an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool holder: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z axis: 1200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swiveling: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation! Features: For horizontal machining, the milling head is rotated 90 degrees and retracted. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Stepless feed in X/Z-axis The machine was partially overhauled by a specialized company a few years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Additional accessories available on request! Condition: good to very good from a training facility Ijdexyc N Eopfx Alreau Available from March 2026.

Būklė: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Isdpsr U St Usfx Alrjau Universal Milling Machine Machine No. 2101 - Year of manufacture 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle taper SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.5 and 1.9 kW, pole-changeable Power supply 380 Volt, 50 Hz - Infinitely variable feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill stroke on vertical milling head 60 mm - Vertical milling head swivels and can be extended 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant unit integrated in machine base - Separate electrical cabinet - Original chip tray mountable on machine base - Electrical diagram available Required space (L x W x H) 1350 x 1100 x 1700 mm Weight 770 kg Good condition

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, A fully refurbished universal tool milling machine Deckel FP2 from 2019 is available. Travel paths X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Iaodovf Iy Djpfx Alrsu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Valdymas 3 ašių, aktyvus Heidenhain TNC 123 trajektorijos valdymas Apsisukimų dažnis 40–2000 aps./min, geometriškai sugradintas tiesioginis reduktorius su 16 pavarų didžiausiam sukimo momentui / frezavimo galiai Iaodpfx Aljyg I Nfjrsu Pjovimo eiga 5–500 mm/min, reguliuojama be pakopų Greitos eiga 1,2 m/min Pinolė: ištraukiama pinolė, vertikali 60 mm, SK40 M16 tempimo sriegis Ašys X/Y/Z 300/160/340 mm Kampinis stalas 600 x 210 mm, maks. apkrova 200 kg

Būklė: geras (naudotas), x eiga 300 mm y eiga 160 mm z eiga 360 mm Bendras galios poreikis 1 kW Mašinos svoris apie 0,8 t Iedpew U Shhjfx Alrsau įvairūs graviravimo rinkiniai

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Iajdpfou R D I Sex Alrou >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System Isdpfjxu Hbhex Alrsau About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 Iodpfsxdi Ivox Alreau • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: Ijdpfou Nvwvjx Alreau >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Iedpfsu T D Nrox Alreau Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm Ijdpfovb Ud Uex Alreau >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Ijdpfxju Racrs Alrsau Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system Iodpfxou Tuk Hj Alrsau >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device Iaodot Aarpspfx Alrou >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.