Ekscentrinis presas

PRESSIX T50 CNR4

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Fpedpfx Aefxyhfshwed Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D12L/8288, Pasiūlymo numeris: D12L/8288 Fjdpfx Ahowi Uc Eowepd Mašinos tipas: Vielinių vinių presas Gamintojas: WAFIOS Tipas: N90 Pagaminimo metai: 2005 Skersmens diapazonas: 2,0-4,0 mm Vinies ilgiai: 50-100 mm Našumas – vnt./min.: 800 Vieta: Mūsų sandėlyje

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 5 277 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 508 mm, Z ašies eigos atstumas: 508 mm, ruošinio svoris (maks.): 300 kg, stalo plotis: 500 mm, stalo ilgis: 630 mm, bendras svoris: 8 500 kg, veleno greitis (maks.): 15 000 aps./min, ašies variklio galia: 22 400 W, veleno nosis: CT 40, įrankių magazino lizdų skaičius: 40, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, CNC Bearbeitungszentrum HAAS UMC 750 SS TECHNISCHE DATEN: Baujahr: 2019 Anzahl synchron gesteuerter Achsen: 5 Verfahrweg X-Achse: 762 mm Verfahrweg Y-Achse: 508 mm Verfahrweg Z-Achse: 508 mm Drehbereich C-Achse: 360° Tischabmessungen: Ø630 x 500 mm Maximale Tischbelastung: 300 kg Schwenkbereich B-Achse: +110° / 350° Spindeltyp: CT 40 Max. Spindeldrehzahl: 15.000 U/min Spindelleistung: 22,4 kW Werkzeugmagazin Plätze: 40 Schmiermitteltank Inhalt: 284 l Betriebsstunden: 5.277 h Gewicht: 8.500 kg IM LIEFERUMFANG ENTHALTEN: x1 Spindel 15.000 U/min x1 Innenkühlung durch die Spindel x1 Hochdruck-Kühlmittelpumpe 21 bar x1 Zusatz-Kühlmittelfilter x1 RENISHAW Funk-Messtaster für Werkstückvermessung x1 Kalibrierkugel x1 RENISHAW Werkzeugtaster x1 HAAS Ölnebelabscheider x1 HAAS Fernbedienung (Handrad) x1 HENNIG Späneförderer, Typ 101435 Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Fjdox Nf Tbjpfx Ahwopd Preis auf Anfrage, Verladung auf LKW ist im Preis enthalten. Weltweiter Versand möglich. Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen gemacht. Für deren Richtigkeit kann keine Gewähr übernommen werden. Vergleichbar mit Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, sowie Fräs-, Bohr- und Gewindeschneidmaschinen und CNC-Schleifmaschinen.

Būklė: naudotas, mašinos/transporto priemonės numeris: 4131, Comm. No. Lg 34422 High-Performance Punching Press BRUDERER BSTA 60 H From ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without strip feeding line. Feed unit BBV 202/120 Fedpfx Ajinzdlshwepd

Būklė: naujas, New hydraulic high-speed presses from min. 300t up to max. 2500t. We provide new mechanical and hydraulic presses for various applications, tailored to your specific requirements. Simply let us know your needs and we will prepare an attractive offer including installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be an official distribution partner since 2020 and look forward to your inquiry. Fpedjf Rt Irjpfx Ahwed

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 Fodpfx Ahjuhbbzswspd - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total power consumption: 11 kVA DIMENSIONS AND WEIGHT - Footprint: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE RUNNING HOURS - Operating hours: 13,837 h EQUIPMENT - CNC control: Fanuc Oi-TD - 3-color status lamp - Powered guide bushing - Part removal device - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire suppression system * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Electrical transformer

Būklė: naudotas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Fpsdpfx Aed Hxx Ashwjd Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at front for pinch protection - 3 material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very heavy-duty machine with extremely robust construction Base machine space requirement (L x W x H): 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Space required for transport (base machine): 4650 x 2610 x 3200 mm Space required for transport (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau; test cuts possible. Currently, the hold-downs are being resealed; the resulting price adjustment will be made in the next few days.

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 1056795, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 13 432 h, X ašies eiga: 1 270 mm, Y ašies eiga: 508 mm, Z ašies eigos atstumas: 635 mm, įrankių magazino lizdų skaičius: 24, valdiklių gamintojas: Haas, bendras svoris: 6 000 kg, valdiklio modelis: Haas, aušinimo skysčio tiekimas: 20 juosta, X ašies padavimo greitis: 21 m/min, veleno greitis (maks.): 12 000 aps./min, Įranga: dokumentacija / vadovas, Laba diena, dėl įmonės uždarymo parduodama visa įmonė. Fpodpfxowccpao Ahwod Įrenginiai yra geros būklės, o įrankius galima derėtis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1984, Pressing force: 3600 kN, pressing force stroke: 1.7 mm, press working capacity: 6120 J. Stroke: 60 mm, installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, weight: approx. 6300 kg. Fpedpfxer A Eifj Ahwod

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatic drop-door tank Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Fsdpfsw D Accsx Ahwopd Cutting speed of 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete system: 2600 x 2600 x 2340 mm Total weight of the system: 3,300 kg The machine will be cleaned, fully overhauled, and tested on all functions after receipt of order. You will receive a 6-month warranty on the machine. We are happy to offer you machine commissioning as an additional service.