Didelio našumo automatinė perforavimo mašina

BRUDERER BSTA 60 H

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 55,4 kW (75,32 AG), bendras svoris: 2 050 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, darbinė masė: 2 050 kg, tuščias svoris: 2 050 kg, kuras: dyzelinas, Technical Data: Round timber up to 24 cm Feed width 300 mm Base weight approx. 2050 kg Year of manufacture: 2022 4-cylinder Hatz turbo diesel engine With common-rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo diesel engine, 55 kW (74.8 HP), with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Tow bar with overrun brake Front jockey wheel Rear support stand Lighting according to German StVZO (impact protected) Bodpfxsv Evx Uj Aahsld Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed and thus chip size Chopping knives resharpenable multiple times for long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic infeed Particularly grippy, aggressive, and uniform feed, each roller powered by its own hydraulic motor Discharge chute with adjustable spreader flap, swivel-mounted Discharge chute on ball bearing turntable Relevant machine parts with sound insulation Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, produces 55.4 kW (75.3 HP). Automatic industrial freewheel clutch between engine and chipping disc protects the engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis, approved by TÜV, for speeds up to 80 km/h. Sturdy, fixed steel mudguards. Provisions for front jockey wheel and rear support stand. Height-adjustable tow coupling with overrun brake and soft dock ball hitch or DIN towing eye. Lighting as per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Foldable feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm. Swiveling discharge chute with adjustable spreader flap. Discharge chute on ball bearing turntable for flexible orientation. Sound insulation on relevant machine components, such as the chipper hood and discharge chute. Emergency stop button located on top of the hopper and on the side of the hopper flap. Chipping System: Safety circuit compliant with EN 13525. Chipping disc with a diameter of Ø 800 mm and a thickness of 40 mm. Closed knife system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable multiple times for long service life. Horizontal counter blade can be used 4 times; vertical counter blade can be used 2 times, for extended service life. Wrap protection at the main bearing of the chipping disc. Hydraulic Feed: Infeed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic infeed for reliable and consistent material transport. Parallel guide for the upper roller ensuring even feeding without skewing. Hydraulically adjustable feed speed for controlling chip size. Level indicator for the hydraulic oil tank.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Bljdpscxxycsfx Aahsd High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Bedofxyhfspfx Aahold Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Gamybos metai: 1994, Techniniai duomenys: Gamybos pajėgumas: 2 x 4,8 MW Generatorių kiekis: 2 vnt. Kuro bako talpa: 480 m³ Kuro rūšis: dujos + alyva Pilna jėgainė 2005 m. pabaigoje atlikta pilna revizija: - 2 degimo varikliai, 12 cilindrų V tipo varikliai iš Maschinenwerke Halberstadt, tipas: 12 VDG 48/42 AL, - skirti darbui su DUJOMIS ir ALYVA 2 generatoriai Leo Somer su: - elektrinė galia po 4,6 MW kiekvienam, - mechaninė galia po 4,8 MW kiekvienam (apie 6500 AG), - šiluminė galia po 4,8 MW 2 vnt. garo katilų su šilumos atgavimu: - elektros įvedimas: vidutinė įtampa 10 kV (tiesiogiai į tinklą). Blsdpsu Nxatjfx Aahed Papildoma įranga: - šilumokaitis, katalizatorius, valdymo kambarys, vidutinės įtampos tinklas, alyvos paruošimo įrenginiai, tarpiniai ir kuro saugojimo bakai 4,8 m³

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, galia: 257 kW (349,42 AG), nominali (akivaizdi) galia: 300 kVA, Power Generator 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM Diesel TBD 232V12 Blsdpet S Ny Uefx Aahjd Installed in container

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: Turning diameter: 38 mm Item: CNC lathe Manufacturer: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z1 travel 320 mm; synchronized guide bushing unit; guide bushing type JBS or SL38; collet type 173E / F48 Bedpfx Aastv Sdfjhsld Sub spindle: Max. pickup diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z2 travel 320 mm; collet type 171E / F42 Tool turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Bjdpfxoq U R T Ns Aahsld Baujahr: 1974 / (Modernisierung 2022) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Sąlyga: geras (naudotas), Gamybos metai: 2000, Sunkus tekinimo staklės ERNAULT SOMUA P72 su 3 kreiptuvais Bjdpfx Aexq D Tyoaheld skersmuo virš lovos 2200 mm skersmuo virš suporto 2000 mm sukimosi greitis nuo 1,5 iki 3000 aps./min - 75 AG staklių svoris 39 t galimas svoris 16 t staklės veikia, galima apžiūrėti

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1984, Pressing force: 3600 kN, pressing force stroke: 1.7 mm, press working capacity: 6120 J. Stroke: 60 mm, installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, weight: approx. 6300 kg. Bjdjr A Eifopfx Aahold

Sąlyga: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Bljdjhrnbkepfx Aahjd Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.