Zmm Pobeda pirkti naudotą (50)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 240 mm, veleno skylė: 80 mm, tekėjimo skersmuo: 400 mm, centro aukštis: 220 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 230 mm, quill skersmuo: 90 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 25 aps./min, sūpynės skersmuo virš skersinio vežimo: 240 mm, lovos plotis: 400 mm, Įranga: sūkių greitis be galo kintamas, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe designed for precise and cost-effective machining tasks. Thanks to its robust construction, powerful drive system, and extensive standard equipment, this machine is ideally suited for continuous industrial operation. Technical Data • Centre height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Centre distance: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centres: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy as per DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev Kodpoyhzgqofx Agfelp • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, inch, module, and DP threads without gear change Slide • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) • Frequency-controlled main drive • Multifix quick-change tool post size C • Central lubrication for slides, headstock, and feed gearbox • Coolant system • Interlocked chuck guard • Traveling chip guard and rear chip panel • CE marking and declaration of conformity • Machine colour RAL 7035 / RAL 7011 Options • Digital position display FAGOR INNOVA 30iT

Būklė: naujas, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter over bed gap: 440 mm Kedpstycpasfx Agfslp Spindle speeds: 12 (85-2000) rpm Tailstock Morse taper: MK 3 Quill travel: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard at rear - Spindle guard - Chuck guard - Tool post guard - Change gears *Special Equipment* - 3-jaw chuck Ø 160 mm, type 3204/DIN6350, BISON - MULTIFIX quick-change tool post type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with braking function, CE-compliant

Būklė: geras (naudotas), Gamybos metai: 1998, ZMM Sliven - CU 1000 luneta Klodpfxjx Ttfae Agfop

Būklė: naudotas, Gamybos metai: 2004, Turning length 750 mm Swing diameter 310 mm Swing diameter over carriage 175 mm Spindle bore 32.0 mm Klodpfxexaa D Tj Agfep Tailstock quill taper MK 3 Spindle speed 85 - 2200 rpm Bed width 200 mm Total power requirement 2.2 kW Machine weight approx. 710 kg Dimensions (LxWxH) 1884 x 717 x 1262 mm Original price ~ 23,000 Euro From a training workshop (!!) Equipment: - Stepless spindle speed control in 2 gear ranges - "TOS" 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital readout, front left - MULTIFIX toolpost with inserts - Movable tailstock - Live center, incl. quick-change drill chuck - Digital speed display - Change gears - Foot/spindle brake * All technical data: - Swing diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Swing diameter over cross slide 175 mm - Bed width 200 mm - Spindle mount / DIN55027 size 5 - Spindle taper 4.5 M - Infinitely variable spindle speed in 2 steps - Infinitely variable spindle speeds: 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Module thread range 0.1 - 1.75 - DP thread range 4 - 70 - Cross slide travel 150 mm - Top slide travel 95 mm - Tailstock quill diameter 40 mm - Tailstock taper 3 MK - Tailstock quill stroke 100 mm - Motor power 2.2 kW - Weight 710 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Turning length 750 mm Turning diameter 310 mm Turning diameter over cross slide 175 mm Spindle bore 32.0 mm Tailstock quill taper MK 3 MT Spindle speed range 85 - 2200 rpm Bed width 200 mm Spindle mount DIN 55027 size 5 Total power requirement 2.2 kW Machine weight approx. 710 kg Dimensions (L x W x H) 1884 x 717 x 1262 mm Original price approx. 20,000 EUR From a university of applied sciences (!!) - Tested condition - machine videos - Kljdpfx Ajxab Tpogfsp ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Equipment: - Robust conventional lead and feed screw lathe - 3-jaw chuck, Ø 160 mm, with spare jaws - "NEWALL" digital readout, front left - MULTIFIX tool post with 4 holders - Fixed steady rest - Travelling steady rest - Sliding tailstock - Foot / spindle brake - Machine leveling feet - Operating manual (PDF/Dutch) * All technical data: - Swing over bed 310 mm - Distance between centers 750 mm - Swing over cross slide 175 mm - Spindle bore 32 mm - Bed width 200 mm - Spindle mount / DIN 55027 size 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm - Metric thread range 0.1 - 28 mm - Module thread range 0.1 - 1.75 - DP thread range 4 - 70 - Cross slide travel 150 mm - Top slide travel 95 mm - Tailstock quill diameter 40 mm - Tailstock taper 3 MT - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €109,100 Lease rate: €2,061.99 Swing diameter over bed: 890 mm Distance between centers: 3,000 mm Center height: 400 mm Spindle bore: 155 mm Swing diameter over cross slide: 490 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 – 38.9 mm/rev Cross feed: 0.016 – 19.45 mm/rev Metric thread range: 0.5 – 480 mm Inch thread range: 60 – 1/16 TPI Module thread range: – Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive: geared transmission 3-axis digital readout: Fagor Quick-change tool post: Amestra, Multifix-style system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck: Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip splash guard full length Leadscrew and feed rod cover Chuck guard Toolholder guard Levelling bolts and plates Reduction sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine lamp Operating manual Equipment in accordance with CE FURTHER TURNING LENGTHS: Turning length 1,500 mm €94,720.00 Kedpfx Agswirxqsfolp Turning length 2,000 mm €98,220.00 Turning length 4,000 mm €117,110.00 Turning length 5,000 mm €128,100.00 Turning length 6,000 mm €144,630.00

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €53,750 Leasing rate: €1,015.88 Swing diameter over bed: 6 mm Centre distance: 2,000 mm Centre height: 315 mm Spindle bore: 103 mm Swing diameter over cross slide: 4 mm Bed width: 400 mm Spindle mount / DIN 55027: 11 Spindle taper: 120 M Number of spindle speeds: 21 Spindle speed range: 12.5 – 1,250 rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Metric thread range: 0.5 – 120 mm Imperial thread range: 60 – 1/4 TPI Module thread range: -- Kljdpfjwirv Aox Agfep DP thread range: 240 – 1 Cross slide travel: 315 mm Top slide travel: 90 mm Tailstock quill diameter: 90 mm Tailstock taper: 5 MT Tailstock quill stroke: 2 mm Motor power: 11 kW Weight: 3,310 kg Drive via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 circular) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm Fixed centre Longitudinal stop for single position Coolant system Rear full-length chip guard Leadscrew and feedshaft cover Chuck guard Toolholder safety cover Levelling bolts and plates Tailstock with quick clamping Low-voltage machine lamp Operating manual Equipment compliant with "CE" OTHER AVAILABLE TURNING LENGTHS: Turning length 1,000 mm – €50,880.00 Turning length 1,500 mm – €51,960.00 Turning length 3,000 mm – €58,400.00 Turning length 4,000 mm – €63,790.00 Turning length 5,000 mm – €78,860.00

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €44,400 Leasing rate: €848.04 Swing diameter over bed: 500 mm Distance between centers: 1500 mm Center height: 250 mm Spindle bore: 80 mm Swing diameter over cross slide: 0 mm Bed width: 400 mm Spindle mount / DIN 55027: size 8 Spindle taper: 80 M Number of spindle speeds: 21 Spindle speed range: 20–2000 rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Number of threads: 64 Metric thread pitch range: 0.5 – 120 mm Inch thread pitch range: 60 – 1/4" TPI Module thread range: DP thread range: 240 – 1 Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: MT 5 Tailstock quill stroke: 2 mm Motor power: 7.5 kW Length: 3,100 mm Width: 1,250 mm Height: 1,400 mm Weight: 2,820 kg Drive: via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra (Multifix system), incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm Fixed centre Longitudinal stop for single position Coolant system Rear full-length chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock with quick lock Low-voltage machine lamp Operating manual Equipment according to “CE” OTHER TURNING LENGTHS: Turning length 1,000 mm €43,420.00 Turning length 2,000 mm €46,190.00 Turning length 3,000 mm €50,840.00 Turning length 4,000 mm Kljdswiq Rfspfx Agfep €56,200.00 Turning length 5,000 mm €71,400.00

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing over bed: 800 mm Centre distance: 2,000 mm Centre height: 400 mm Spindle bore: 260 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Ksdpewirghefx Agfslp Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,000 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine model is widely used in the petroleum industry. Pipe thread lathes are highly capable of machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping pipes with two chucks and the supplied steady rests enables machining of pipes with significant lengths. Suitable for both production of components and equipment for the oil and transmission industries as well as for the maintenance of such systems. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra type C, similar to Multifix system incl. 4 holders (3x rectangle, 1 round) 2 pcs. 3-jaw chuck Bison 3295, dia. 500 mm, on both spindle sides, clamping range 120 - 350 mm (option: special hard outside jaws, clamping range 120 - 500 mm) 2 pcs. steady rests on stands, dia. 60 - 260 mm with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning attachment Coolant system Rear chip splash guard over full length Lead screw and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock Reducing sleeve for tailstock quill Mechanical movement of tailstock via handwheel Low-voltage machine lamp Operating manual Equipment in accordance with "CE" Further models available on request with spindle bore from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm.

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing diameter over bed: 800 mm Distance between centers: 2000 mm Center height: 400 mm Spindle bore: 3 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6100 kg The primary application of this type of lathe is pipe machining. Accordingly, this type of machine is widely used in the oil industry. Pipe-threading lathes possess significant capabilities for machining threaded joints on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping of pipes with two chucks and the provided pipe rests enable machining of pipes with considerable length. Suitable both for the manufacture of components and equipment for the oil and transmission industry as well as for the maintenance of such installations. - Drive via gear transmission - Electrodynamic brake - 3-axis digital display Fagor - Quick-change tool post Amestra type C, Multifix-compatible system including 4 holders (3 rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, Ø 500 mm, mounted on both sides of the spindle Kjdjwiq E Aopfx Agfjlp - 2 pcs. steady rests on stands for Ø 120 - 320 mm with rollers - Rapid traverse (4) - Longitudinal stop for single position - Taper turning attachment - Coolant system - Rear chip protection wall across the full length - Lead screw and feed shaft cover - Chuck guard - Tool holder guard - Levelling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine light - Operator’s manual - Equipment according to "CE" standards Other models with spindle bores from 5 to 358 mm, center distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Būklė: naujas, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €131,720 Leasing rate: €2,489.51 Swing diameter over bed: 1,020 mm Distance between centers: 2,000 mm Center height: 510 mm Spindle bore: 358 mm Swing diameter over cross slide: 770 mm Bed width: 560 mm Spindle taper: 361 M Number of spindle speeds: 12 Spindle speed range: 6.3 – 3,100 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread pitch range: 0.5 – 0 mm Inch thread pitch range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 505 mm Top slide travel: 270 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 18.5 kW Weight: 6,400 kg The primary purpose of this type of lathe is the machining of pipes. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes have great capability for machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping of pipes with two chucks and the supplied steady rests enable machining of pipes of great length. Suitable both for manufacturing parts and assemblies for the oil and transmission industries as well as maintenance work on such equipment. Features: - Drive via gear transmission - Electrodynamic brake - 3-axis Fagor digital readout - Amestra Type D1 quick-change tool post, system compatible with Multifix incl. 4 holders (3x rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, 660 mm diameter on both ends of the spindle (max. 250 rpm), clamping range 5 – 400 mm (option: special hard external jaws, clamping range 80 – 400 mm) - 2 pcs. steady rests on stands, diameter 160 – 360 mm with rollers - Rapid traverse (4) - Longitudinal stop for one position - Taper turning attachment - Coolant system - Rear full-length chip splash guard - Leadscrew and feed shaft cover - Chuck guard - Toolholder guard - Leveling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine lamp Kedpfx Aowiq Drsgfjlp - Operating manual - Equipment according to "CE" standards Further models with spindle bores from 5 to 358 mm, distances between centers from 1,000 to 6,000 mm, as well as swing diameters from 730 to 1,020 mm available on request.

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Distance between centers: 3000 mm Center height: 430 mm Spindle bore: 132 mm Swing over cross slide: 620 mm Bed width: 560 mm Spindle mount / DIN55027: 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed range: 7.5 - 1015 rpm Klodpswiq Rxjfx Agfep Number of feeds: 150 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 9 mm/rev Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/6 TPI Module thread range: DP thread range: 240 - 2/3 Cross slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill stroke: 225 mm Motor power: 15 kW Length: 3470 mm Width: 1700 mm Height: 1730 mm Weight: 4650 kg Drive type: Geared headstock 3-axis digital readout Fagor Quick-change toolpost Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 round) Three-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for one position Coolant system Rear chip guard over the full length Lead screw and feed shaft guard Chuck guard Toolholder guard Leveling bolts and plates Tailstock with quick-clamping Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine lamp Operating manual Equipment according to "CE" OTHER TURNING LENGTHS: Turning length 1,500 mm €68,870.00 Turning length 2,000 mm €71,780.00 Turning length 4,000 mm €88,640.00 Turning length 5,000 mm €101,200.00 Turning length 6,000 mm €114,800.00

Būklė: naujas, Condition: New Country of origin: Bulgaria Price: €115,600 Leasing rate: €2,184.84 Swing diameter over bed: 1,090 mm Between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Inch thread range: 60 - 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive via gearbox 3-axis digital readout (Fagor) Quick-change tool post Amestra, Multifix-type system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN 6350, Ø 500 mm Fixed center Coolant system Full-length rear chip splash guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Reducing sleeve for tailstock quill Tailstock movement by electric motor Low-voltage machine lamp Operating manual Equipment according to CE standard Ksdpswiqv Uefx Agfslp OTHER TURNING LENGTHS: Turning length 1,500 mm: €101,220.00 Turning length 2,000 mm: €104,720.00 Turning length 4,000 mm: €123,610.00 Turning length 5,000 mm: €134,700.00 Turning length 6,000 mm: €151,230.00

Būklė: naujas, Condition: New Country of Origin: Bulgaria Price: €122,250 Leasing rate: €2,310.53 Swing diameter over bed: 1,320 mm Center distance: 3,000 mm Center height: 625 mm Spindle bore: 155 mm Swing diameter over cross slide: 940 mm Bed width: 700 mm Spindle mount / DIN55027: No. 15 Spindle taper: 160 M Speed range: 5 - 1,000 rpm Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread pitch range: 0.5 - 480 mm Imperial thread pitch range: 60 - 1/16 TPI Module thread range: Cross slide travel: 685 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill travel: 260 mm Weight: 8,550 kg Drive via gear transmission 3-axis digital readout, Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip guard along the entire length Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Reducing sleeve for tailstock quill Tailstock operated by electric motor Low-voltage machine lamp Operating manual Ksdpfx Aowiqwfjgfslp Equipment in accordance with “CE” ADDITIONAL TURNING LENGTHS: Turning length 1,500 mm €107,770.00 Turning length 2,000 mm €112,550.00 Turning length 4,000 mm €130,160.00 Turning length 5,000 mm €141,250.00 Turning length 6,000 mm €157,780.00

Būklė: naujas, Centre height: 315 mm Swing over bed: 630 mm Swing over cross slide: 430 mm Swing in gap: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle mount DIN 55027: Size 11 Bed width: 400 mm 21 spindle speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4" 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 DP Tailstock taper: MT 5 Quill travel: 230 mm Quill diameter: 75 mm Kledpfx Agjk Dpxljfjp Drive power: 11 kW Dimensions (L x W x H): approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital readout, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool post, "Multifix" System, Size C • Powerful main drive, 11 kW • Large spindle bore, Ø 103 mm • Travelling steady rest • Fixed steady rest, small • Fixed steady rest, large • Gap in bed • Rapid traverse longitudinal & cross • Electrodynamic brake • Coolant system • Machine lamp • Quick clamping device for tailstock • Bed stop • Full-length rear splash guard • Tool post guard • Chuck guard, with electrical interlock • Leadscrew and feed rod guard • Exchangeable gears • Fixed centre for spindle • Reducing sleeve for spindle • Two-tone paint: upper light grey RAL 7035, base blue RAL 5015 • CE-compliant Delivery time: approx. 2 months after order receipt Delivery: ex works Bulgaria, free loaded truck Warranty period: 12 months for single-shift operation (8 hrs) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naudotas, Gamybos metai: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: prompt, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 Special price: €22,600 Swing over bed: 400 mm Distance between centers: 1000 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: size 6 Spindle taper: 6 M Number of spindle speed ranges: 12 Spindle speed: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Inch thread range: 120–4 TPI Module thread range: 0.0625–1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: MT 4 Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2750 mm Width: 1100 mm Height: 1600 mm Weight: 1540 kg This machine is currently used in our workshop for repair work, and has therefore seen very little use (original price: €36,070.00). Drive via gearbox 3-axis digital readout Fagor 40i Quick-change tool post Multifix type B incl. 4 holders (3 rectangular, 1 round) Three-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 according to DIN 55027 Rapid traverse (4) Fixed centre Coolant system 1 flanged plate for turning chuck, Ø 200 mm 1 adaptor sleeve Full-length rear chip guard Kjdpfjwirdtex Agfolp Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick-clamping Low-voltage machine lamp Operating manual and machine labels in GERMAN CE-compliant equipment

Būklė: naujas, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Kljdpfx Agjuladkofsp

Būklė: naujas, Gamybos metai: 2022, Metal Lathe 400V, Manufacturer: ZMM - Type C400TM/1000 The structure and design of this machine meet current requirements for efficiency and ergonomics. The manufacturing technology, use of high-quality materials, and standardized components from well-known and globally established manufacturers, along with continuous quality control, satisfy even the most demanding customer requirements. This machine is characterized by high technological, functional, and operational performance, reliability, and safety. Naturally, this machine complies with current European safety standards. Features of this lathe General: • European premium quality lathe • Equipped with automatic feed • Fitted with digital readout for X-Y axis Bed: • Heavy, strongly ribbed, and rigid bed casting made from high-grade grey cast iron, which eliminates vibrations when the machine is properly leveled and operated. • Double-prismatic, induction-hardened, and precisely ground guideways • Integrated removable gap bridge, allowing the machining of large workpieces. Headstock: • The stable, strongly ribbed, and precision-machined headstock guarantees non-vibrating and precise operation, even at high speeds or under heavy-duty machining conditions. • The ground gears are made of induction-hardened steel and run in an oil bath. • The spindle is hardened, precisely ground, and balanced; featuring a standard bore and spindle nose, including Camlock system for direct mounting of 3-jaw self-centering chuck, 4-jaw independent chuck, faceplates, or flange-mounted chucks. • Spindle bearings can be from SKF, FAG, or NSK with preload for accurate and durable mounting. This ensures long-term high precision operation. Lathe carriage: • Mechanized cross and longitudinal movements • Built-in safety mechanism against overload • Interlock to prevent simultaneous engagement of the half-nut with the leadscrew and automatic feed • Rapid traverse in both axes Feed gearbox: • The feed gearbox offers diverse feed rates and threading pitches – metric, inch, module, and DP threads – for machining various parts. Designed for extremely convenient operation. Specifications: • Product type: Lathe • Brand: ZMM • Voltage: 400V • Centre height: 200 mm • Swing over bed: 400 mm • Swing over cross slide: 235 mm • Swing in gap: 550 mm • Bed width: 320 mm • Spindle bore: 52 mm • Distance between centers: 750 / 1000 / 1500 mm • Spindle nose DIN 55027 - size 6 • Spindle speeds: 50–2240 rpm • Motor power: 4 kW • Number of feeds: 80 • Longitudinal feed range: 0.015–0.6 mm/rev • Cross feed range: 0.0075–0.3 mm/rev • Number of thread pitches: 40 • Metric threading: 0.25–7.5 mm • Whitworth threading: 120–4 TPI • Module threading: 0.0625–1.875 module Kjdpfeiy Nq Hox Agfelp • DP threading: 480–16 DP • Cross slide travel: 235 mm • Tool post travel: 110 mm • Tailstock quill diameter: 100 mm • Tailstock: MT4 • Weight: 1700 kg Price excludes VAT!

Būklė: naudotas, Gamybos metai: 1995, tekinimo skersmuo virš slankiojančio stalo: 500 mm, Universal Lathe Make: ZMM Type: 500 Year: 1995 Technical Data Ksdpfx Aswudhuegfjlp Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Distance between centers: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolholder • Live center • Coolant pump • Machine lamp All information subject to change. A powered demonstration is possible at any time in our showroom.

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €77,840 Leasing rate: €1,471 Swing diameter over bed: 760 mm Distance between centers: 3,000 mm Center height: 380 mm Spindle bore: 132 mm Swing diameter over cross slide: 520 mm Bed width: 560 mm Spindle mount / DIN55027: 11 Spindle taper: 140 M Number of spindle speed steps: 17 Spindle speed range: 7.5 – 1,015 rpm Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: Cross slide travel: 410 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 15 kW Weight: 4,470 kg Drive via geared transmission 3-axis digital readout by Fagor Quick-change tool post Amestra, system like Multifix incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for one position Coolant system Rear chip splash guard over full length Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical tailstock movement Kledpfx Agewiq Rrofsp Low-voltage machine lamp Operating manual Equipment according to 'CE' OTHER TURNING LENGTHS: Turning length 1,500 mm €63,970.00 Turning length 2,000 mm €66,880.00 Turning length 4,000 mm €83,740.00 Turning length 5,000 mm €96,300.00 Turning length 6,000 mm €109,900.00

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Techniniai duomenys: Aukštis tarp centrų: 500 mm Sukimosi skersmuo: 1090 mm Sukimosi skersmuo virš skersinio pastūmos: 690 mm Atstumas tarp centrų: 1500 mm Apsisukimų skaičius: 6 – 1250 aps./min. Kodpfxjxlgmfj Agfslp Veleno anga: 155 mm Skaitmeninis padėties indikatorius: SONY Lovo plotis: 700 mm Įrankio laikiklis: MK 6 Variklio galia: 30 kW CE ženklinimas Matmenys (ilgis x plotis x aukštis): apie 3500 x 1750 x 1900 mm Svoris: apie 7,5 t Priedai: Centrinis tepimas Aušinimo skysčio sistema Galinė purškimo apsauga 3 žiotų tekės griebtuvas 500 mm 4 žiotų tekės griebtuvas 800 mm Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašinos išvaizda, techninė būklė ir nusidėvėjimas atitinka jos amžių; naudotos mašinos parduodamos be jokios garantijos.

Būklė: naujas, Gamybos metai: 2026, sukimosi skersmuo virš skersinio stumduko: 620 mm, tekėjimo skersmuo: 6 000 mm, veleno skylė: 103 mm, tekinimo skersmuo virš slankiojančio stalo: 860 mm, New CNC-controlled flat-bed machine with Siemens Sinumerik 828D BASIC ShopTurn control. Delivery time: approx. 4 months after technical and commercial agreement. Working area: - Center height [mm]: 330, 380, 430 - Swing over bed [mm]: 660, 760, 860 - Swing over cross slide [mm]: 420, 520, 620 - Distance between centers [mm]: 1500 to 6000 Klsdpfx Ajufgfyogfop - Bed width [mm]: 560 - Spindle nose: DIN 55027/11 - Spindle bore [mm]: 103 - Max. spindle torque [Nm]: 2000 - Speed control: stepless - Speed ranges: 3 mechanical - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 – 3000 - Rapid traverse X/Z [mm/min]: 8000 - Tailstock quill diameter [mm]: 105 - Quill taper [MT]: 6 - Quill travel [mm]: 225 - Workpiece weight supported with tailstock [kg]: 1500 Options: - Fixed steady rest - 3-jaw and 4-jaw chuck - Faceplate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret with indexing disc - Drilling rest with boring bar - And much more

Būklė: geras (naudotas), Gamybos metai: 1986, Offer 23389 Technical Data: Kledpfsrckv Hjx Agfjp - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - 4 feed rates: 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds (gear stages): 95 - 2,000 rpm - Drilling spindle stroke: 160 mm - Throat depth: 350 mm - Table with 3 T-slots, height-adjustable: 340 x 320 mm - Table tiltable left and right - Max. distance table to drill spindle: 500 mm - Max. distance machined base plate to drill spindle: 1,050 mm - Column diameter: 160 mm - Coolant system - Work light - Drive: 400 V / 2.4 kW - Required space (approx.): W 600 x H 1,950 x D 800 mm - Weight (approx.): 350 kg

Būklė: geras (naudotas), Gamybos metai: 1986, mašinos/transporto priemonės numeris: 23036, Offer 23380 Klsderckw Iepfx Agfop Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MT 3 - 4 feeds: 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear steps: 95 - 2000 rpm - Drilling spindle stroke: 160 mm - Throat depth: 350 mm - Table with 3 T-slots, height adjustable: 340 x 320 mm - Table tiltable left & right - Max. distance table – drill spindle: 500 mm - Max. distance machined base plate – drill spindle: 1050 mm - Column diameter: 160 mm - Lighting - Drive: 400 V / 2.4 kW - Required space approx.: W 600 x H 1950 x D 800 mm - Weight approx.: 350 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Swing diameter over bed: 320 mm Kledpfx Agotv Iibjfjp Swing diameter over cross slide: 185 mm Turning length: 1000 mm Spindle bore diameter / mount: 32 mm Spindle speeds (12): 85 - 2000 rpm Longitudinal feeds: 0.006 - 1.77 mm/rev Cross feeds: 0.003 - 0.888 mm/rev Thread cutting - metric pitch: 0.1 - 28 mm Thread cutting - module: 0.1 - 1.75 mm Thread cutting - imperial pitch: 2.5 - 75 TPI Mains voltage: 400 V / 50 Hz Drive power: 2.2 kW Machine weight approx.: 0.8 t Space requirement approx.: 1.8 x 0.8 x 1.4 m Quick-change tool post with 5 holders Fixed steady rest 3-jaw chuck Ø 200 mm Coolant system