Vairavimo/traukos veleno tekinimo staklės, 800–999 mm tekinimo skersmuo virš lovos pirkti naudotą (57)

Gamybos metai: 2024, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, This universal lathe is thoroughly overhauled and modernized by our specialists in our workshop, based on order specifications. The machine fully meets all technical standards and parameters of a comparable new machine of this type. It will be ready for collection within a maximum of 3 to 3.5 months from the customer order date. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing over bed [mm]: 930 mm - Swing over cross slide [mm]: 650 mm - Swing in gap [mm]: 1200 mm Gijdjkh D Txopfx Abdol - Spindle bore diameter [mm]: 95 mm - Distance between centers [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6,000 kg - Max. workpiece weight with 1 steady rest [kg]: 7,500 kg - Max. workpiece weight with 2 steady rests [kg]: 9,000 kg - Number of spindle speeds: 21 - Speed range [rpm]: 8–800 - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, - distância entre centros / comprimento de torneamento: 5000 mm - diâmetro de torneamento sobre o barramento: 930 mm - diâmetro de torneamento sobre o carro: 650 mm Godpswnnuxofx Abdeil

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 630 mm, veleno skylė: 95 mm, tekėjimo skersmuo: 1 200 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, quill skersmuo: 130 mm, bendras ilgis: 6 500 mm, bendras plotis: 1 750 mm, bendras aukštis: 1 435 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 7 200 kg, disko skersmuo: 500 mm, quillo laikiklis: MK 6, ruošinio svoris (maks.): 9 000 kg, veleno tvirtinimas: MK 6, TPK 90 x 4000 mm tekinimo staklės. Gamintojas: PORĘBA (Lenkija) - 1987 m. Tekinimo diametras virš lovos: 930 mm. Tekinimo diametras virš skersinio vežimo: 630 mm. Tekinimo diametras tilte: 1200 mm. Veleno perėjimo anga: 95 mm. Veleno apsukų diapazonas: 8-800 aps./min. Pagrindinės ir skersinės pastūmos diapazonas (80): - Išilginė: 0,1 - 12,8 mm/aps. - Skersinė: 0,05 - 6,4 mm/aps. Dvikryptis variklis: 15/22 kW. Morse kūgis viduje: 6. Apdirbamo ruošinio svoris: - Tekinant griebtuvu: 800 kg, Godewa S Awjpfx Abdjil - Tarp atramų: 6000 kg, - Su 1 atrama: 7500 kg, - Su 2 atramomis: 9000 kg, Maks. tekinimo ilgis tarp atramų: 4000 mm Viršutinio skersinio poslinkis: 300 mm. Matmenys (ilg. x pl. x aukšt.): 4500 x 1750 x 1435 mm. Svoris: 7200 kg. Įranga: 3-žnyplių savaime centruojantis griebtuvas, Atrama 615 mm, atrama 415 mm.

Sąlyga: naudotas, Sukimosi skersmuo: 320 mm Sukimo ilgis: 800 mm Apsisukimo skersmuo virš lovio skersinio: 180 mm Sukimosi greitis: 20 - 3200 aps./min Veleno skylė: 36 mm Pinolės eiga: 160 mm Pinolė: MK 3 Staklių svoris: apie 1200 kg Matmenys (I x P x A): 2000 x 950 x 1600 mm Įranga: - FORKARDT 3-žandų griebtuvas Ø160 mm - MULTI-FIX greito keitimo laikiklis su įdėklais Gisdpfx Abox Tu I Asdjl - Aušinimo skysčio sistema - Griebtuvo apsauga - Keičiami dantračiai - Drožlių atitvara - Staklių apšvietimas

Gamybos metai: 2023, Sąlyga: visiškai atnaujintas (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, veleno skylė: 110 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekėjimo ilgis: 3 000 mm, veleno greitis (maks.): 1 250 aps./min, veleno greitis (min.): 6 aps./min, metrinio sriegio skersmuo (min.): 1 mm, didžiausias metrinės sriegio skersmuo: 224 mm, bendras svoris: 7 120 kg, Sunkiasvoris tekinimo staklės puikios būklės. Įrengtos su inverteriu, automatiniu ir greitu padavimu. Elektros sistema su Siemens valdikliu, ABB 15 kW varikliu ir visi laidai pakeisti. Gjdpfx Abjxwccgodeil

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/6M has been extensively overhauled and modernized by us. It features technical specifications that correspond with the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and the Polish standard, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, available for inspection at any time Gjdpfeiwa Iaex Abdjil Technical data: - Distance between centers / Turning length: 6,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in the gap: 1,200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers with 1 steady rest: 7,500 kg - Maximum workpiece weight between centers with 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, veleno skylė: 102 mm, centro aukštis: 400 mm, tekėjimo ilgis: 2 000 mm, 26 apsukų diapazonas nuo 4,5 iki 1400 aps./min - varomas viršutinis staliukas - greitasis pastūma - Forkardt 400 mm Godpfx Absx Tfm Nedjil

Sąlyga: dilaminuotas dirbtuvėje (naudotas), We are offering an exceptionally good precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 800 Year of manufacture: 1984 Serial no.: 04041.01-807 Centre height: 400 mm Swing over bed: 820 mm Swing over cross slide: 515 mm Centre distance: approx. 2200 mm Effective turning length: approx. 2000 mm Bar capacity: 128 mm Spindle nose DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 spindle speeds: 7.1 – 1400 rpm 60 cross feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Rapid traverse on longitudinal and cross feed Power-driven compound slide Tailstock quill stroke: 280 mm Tailstock taper: MT 6 Space requirement (LxWxH): approx. 6700x2500x2250 mm Weight: approx. 7500 kg Accessories: - 3-axis digital display HEIDENHAIN - Coolant unit - Chip guard rear wall - Autoblock 500 mm power chuck with jaws - Way cover for leadscrew support to bed - Machine lamp - Chip conveyor - Parat basic toolholder including 11 holders - Extraction system - 3-jaw steady rest with roller inserts (follow-type) - Emergency stop - Chuck key - Live centre - Operating manual Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and in the cross slide 0.15 mm The machine geometry is also very good (checked with dial gauge) Gedpfxsrt T S Ro Abdjil Measured on the flat guideway with dial gauge towards the chuck Bed wipers replaced, input shaft for the gearbox end play adjusted and bearings replaced, drive pins on motor/gearbox side renewed, oil seals in apron replaced, various bearings replaced The machine can be demonstrated under power. On request, functional videos can also be provided.

Sąlyga: naudotas, Gamybos metai: 1985, Sūkio skersmuo virš lovio: 500 mm Sūkio skersmuo virš atramos: 300 mm Sūkių ilgis: 1000 mm Godexyagbepfx Abdoil Sriegimo ir maitinimo velenų tekinimo staklės Matra MD 25 S Metai: 1985 Heidenhain skaitmeninis indikatorius plokštuminiam ašiai Sūkio skersmuo virš lovio: 500 mm Apskritimas virš skersinio vežimo: 300 mm Centru atstumas: 1000 mm Techniniai duomenys – žiūrėti nuotraukose

Sąlyga: naujas, The KNUTH Sinus 400/1500 D is a robust universal lathe from the category of conventional lathes, renowned for its high processing efficiency. Featuring a one-piece, heavy cast-iron bed and a spindle bore of 105 mm, this machine is ideal for machining long workpieces or large flanges. Technical highlights include a removable gap for workpieces with a diameter of up to 1035 mm, high precision and smooth running, as well as rapid traverse in two axes for fast positioning. Safety features such as overload protection and automatic lubrication of the main spindle ensure reliable operation. The manual design provides a direct power transmission between motor and spindle, which increases performance. If you are interested in the Sinus 400/1500 D, you can now submit an inquiry or request further information about this universal lathe in the conventional lathe category. Gjdjq Rdp Aepfx Abdjil

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 930 mm Swing diameter over support: 630 mm Turning length: 6000 mm Swing diameter in gap: 1250 mm Spindle bore: 95 mm Speed range: 8 - 800 rpm Total power requirement: 25 kW Space requirement approx.: 9 x 2 x 1.9 m Faceplate Gjdpjvndddsfx Abdjil 2 steady rests Coolant system Taper turning attachment

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The universal lathe PORĘBA TPK-80/3M has been comprehensively rebuilt and modernised by us. It features technical specifications that are consistent with the technical and operational documentation of a new machine, complies with the technical acceptance criteria of the WOT and Polish standard, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: customised general overhaul, delivery time 3.5 months from order placement Technical Specifications: - Distance between centres/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centres: 6,000 kg - Maximum workpiece weight between centres + 1 steady rest: 7,500 kg - Maximum workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 5000 mm Width: 1800 mm Height: 1800 mm Total weight: 6200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions Gedefknw Rspfx Abdjil - 2-axis Digital Read Out, including display, installation and calibration - Steady rest 40–400 mm, roller type - Steady rest 400–600 mm, roller type - MULTIFIX quick-change tool post

Sąlyga: naudotas, Gamybos metai: 1953, WEIPERT tekinimo staklės WEZ * Serijos numeris: 13867 Trys žandikaulių griebtuvas: d 400 mm Apsisukimų skersmuo virš lovos: 800 mm Centro atstumas: 2.500 mm Galinis centras: Taip * Papildoma informacija bus pateikta vėliau. * Gisdox R Tnvopfx Abdol SVARBU: Dėl logistikos priežasčių parduodame tik Europos Sąjungoje. Pirkėjas atsakingas už įrenginio iškėlimą, pakrovimą ir transportavimą. * „Pardavėjas neteikia jokios garantijos parduotai prekei. Prekė parduodama tokios būklės, kokia yra, be jokių garantijų dėl tinkamumo konkrečiam tikslui ar be trūkumų. Pirkėjas patvirtina, kad apžiūrėjo prekę prieš pirkimą ir yra patenkintas jos būkle. Pardavėjas neprisiima atsakomybės už bet kokią žalą, atsiradusią naudojant prekę. Bet kokios pirkėjo pretenzijos pardavėjui yra atmetamos.“ * Duomenys: 2026-01-06 * Kaina: 9.500 € derybų kaina + PVM * Kainos nurodytos be PVM. * Dėl klausimų ir papildomos informacijos mielai suteiksiu daugiau informacijos.

Sąlyga: naujas, Condition: new Country of origin: Bulgaria Price: €109,100 Lease rate: €2,061.99 Swing diameter over bed: 890 mm Distance between centers: 3,000 mm Center height: 400 mm Spindle bore: 155 mm Swing diameter over cross slide: 490 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 – 38.9 mm/rev Cross feed: 0.016 – 19.45 mm/rev Metric thread range: 0.5 – 480 mm Inch thread range: 60 – 1/16 TPI Module thread range: – Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Giodpfxowirxqe Abdel Motor power: 22 kW Weight: 7,500 kg Drive: geared transmission 3-axis digital readout: Fagor Quick-change tool post: Amestra, Multifix-style system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck: Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip splash guard full length Leadscrew and feed rod cover Chuck guard Toolholder guard Levelling bolts and plates Reduction sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine lamp Operating manual Equipment in accordance with CE FURTHER TURNING LENGTHS: Turning length 1,500 mm €94,720.00 Turning length 2,000 mm €98,220.00 Turning length 4,000 mm €117,110.00 Turning length 5,000 mm €128,100.00 Turning length 6,000 mm €144,630.00

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, L-Z tekinimo staklės POREBA TPK 80 / 10 m parduodamos. Pagaminimo metai 1983. Tekinimo ilgis 10 m! Staklės labai geros būklės. Daug priedų. Yra vaizdo įrašas. Gijdpfx Aox Il R Debdol

Sąlyga: geras (naudotas), Gamybos metai: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 2000 mm Bed width: 480 mm Cross slide travel: 400 mm Top slide travel: 180 mm Tool shank cross-section: 32 x 25 mm Drive power: 22 kW Gijdsxn Ty Rspfx Abdel Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter at front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of speeds: 24 Longitudinal feeds: 0.092 - mm/rev Cross feeds: 0.046 - mm/rev Metric threads: 0.5-112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread - module: mm Thread - DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill internal taper: MT 6 Workpiece weight between centers max.: 000 kg Workpiece weight max. – unsupported: 750 kg 3-jaw chuck Röhm, Ø Machine dimensions approx.: 4600x1900x1600 mm Weight approx.: 4300 kg Number of feed and thread selections: 99 Accessories: 3-axis digital readout Mobile chip guard Coolant device Rapid traverse on all axes Automatic feed on the top slide Taper turning attachment Thread chasing dial Multifix tool post size C Longitudinal and face stop Fixed steady – 300 mm Travelling steady – 180 mm Change gears for special threads Taper sleeve for main spindle MT 6 Fixed centre MT 6 CE conformity

Sąlyga: naudotas, bendras aukštis: 1 850 mm, bendras ilgis: 6 300 mm, bendras plotis: 1 500 mm, Tuščias svoris: 7.500 kg Kaina: Pagal užklausą - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 5328 - Valdymas: Konvencinis - Galia [kW]: 24.0 - Centrų aukštis [mm]: 460 - Sukimosi skersmuo virš stovo [mm]: 920 - Atstumas tarp centrų [mm]: 4000 - Veleno praėjimas [mm]: 76 - Transportavimo matmenys: 6300mm x 1500mm x 1850mm (i x p x a) - Transportavimo svoris [kg]: 7500kg - Transporto paketų [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir mainai galimi bet kada su bet kokia pramonės įranga Giodpfx Aswmll Sebdol Lukas van Rossum

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekėjimo skersmuo: 900 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekinimo skersmuo virš viršutinio vežimo: 570 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, veleno tvirtinimas: MK 6,

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, 840 mm x 3 500 mm, posūkis virš skersinio slankiklio 530 mm, veleno skylė 82 mm, 7,1-900 aps./min, 18,5 kW, atramos, 4-žandikaulių plokštė, skaitmeninis atvaizdavimas (DRO). Giedpsxqxvvefx Abdjl

Sąlyga: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing over bed: 800 mm Centre distance: 2,000 mm Centre height: 400 mm Spindle bore: 260 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,000 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine model is widely used in the petroleum industry. Pipe thread lathes are highly capable of machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping pipes with two chucks and the supplied steady rests enables machining of pipes with significant lengths. Suitable for both production of components and equipment for the oil and transmission industries as well as for the maintenance of such systems. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra type C, similar to Multifix system incl. 4 holders (3x rectangle, 1 round) 2 pcs. 3-jaw chuck Bison 3295, dia. 500 mm, on both spindle sides, clamping range 120 - 350 mm (option: special hard outside jaws, clamping range 120 - 500 mm) 2 pcs. steady rests on stands, dia. 60 - 260 mm with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning attachment Coolant system Rear chip splash guard over full length Lead screw and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock Reducing sleeve for tailstock quill Godjwirghepfx Abdeil Mechanical movement of tailstock via handwheel Low-voltage machine lamp Operating manual Equipment in accordance with "CE" Further models available on request with spindle bore from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, bendras ilgis: 10 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 9 200 kg, The universal lathe PORĘBA TPK-90/8M has been comprehensively rebuilt and modernized by us. It features technical specifications that are consistent with the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Overhauled to order; delivery time is 3.5 months from order placement. Technical data: - Distance between centers / turning length: 8000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Max. workpiece weight between centers: 6,000 kg - Max. workpiece weight between centers + 1 steady rest: 7,500 kg - Max. workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Gededyvh Nspfx Abdeil - Length: 10,500 mm - Width: 1,800 mm - Height: 1,865 mm - Net weight: 9,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment (subject to surcharge): - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - MULTIFIX quick-change tool post

Sąlyga: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing diameter over bed: 800 mm Distance between centers: 2000 mm Center height: 400 mm Spindle bore: 3 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6100 kg The primary application of this type of lathe is pipe machining. Accordingly, this type of machine is widely used in the oil industry. Pipe-threading lathes possess significant capabilities for machining threaded joints on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping of pipes with two chucks and the provided pipe rests enable machining of pipes with considerable length. Suitable both for the manufacture of components and equipment for the oil and transmission industry as well as for the maintenance of such installations. Godpfx Aewiq E Ajbdoil - Drive via gear transmission - Electrodynamic brake - 3-axis digital display Fagor - Quick-change tool post Amestra type C, Multifix-compatible system including 4 holders (3 rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, Ø 500 mm, mounted on both sides of the spindle - 2 pcs. steady rests on stands for Ø 120 - 320 mm with rollers - Rapid traverse (4) - Longitudinal stop for single position - Taper turning attachment - Coolant system - Rear chip protection wall across the full length - Lead screw and feed shaft cover - Chuck guard - Tool holder guard - Levelling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine light - Operator’s manual - Equipment according to "CE" standards Other models with spindle bores from 5 to 358 mm, center distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 650 mm, tekėjimo ilgis: 6 000 mm, bendras plotis: 8 500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, powered up, and can be inspected at any time. Equipment as shown in the photos. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): - Longitudinal: 0.1 – 12.8 - Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 1,800 mm Gedpfx Abev Epkkedsil - Height: 1,800 mm - Total weight: 8,000 kg

Sąlyga: naujas, Condition: New Delivery time: approx. 4 months from order Godpewiq Rxsfx Abdeil Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Distance between centers: 3000 mm Center height: 430 mm Spindle bore: 132 mm Swing over cross slide: 620 mm Bed width: 560 mm Spindle mount / DIN55027: 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed range: 7.5 - 1015 rpm Number of feeds: 150 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 9 mm/rev Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/6 TPI Module thread range: DP thread range: 240 - 2/3 Cross slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill stroke: 225 mm Motor power: 15 kW Length: 3470 mm Width: 1700 mm Height: 1730 mm Weight: 4650 kg Drive type: Geared headstock 3-axis digital readout Fagor Quick-change toolpost Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 round) Three-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for one position Coolant system Rear chip guard over the full length Lead screw and feed shaft guard Chuck guard Toolholder guard Leveling bolts and plates Tailstock with quick-clamping Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine lamp Operating manual Equipment according to "CE" OTHER TURNING LENGTHS: Turning length 1,500 mm €68,870.00 Turning length 2,000 mm €71,780.00 Turning length 4,000 mm €88,640.00 Turning length 5,000 mm €101,200.00 Turning length 6,000 mm €114,800.00