Poreba Tpk 90 pirkti naudotą (48)

Būklė: geras (naudotas), Manufacturer: POREBA Model: TPK 90 / 110 Year of manufacture: 994 Swing steady 1: 150 mm Swing steady 2: 350 mm Swing steady 3: 500 mm 3 units suitable for TPK 90 (or with spacers, TPK 110) Spacers are not included Second tool post to be mounted on slide Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (approximate) Length: 1200 mm Width: 800 mm Height: 1000 mm Gedjwrrbkepfx Ah Aoit Weight: 1800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, they do not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/6M has been extensively rebuilt and modernized by us. It features technical specifications that match those stated in the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Delivery time from 3 to 3.5 months, general overhaul according to customer order. Technical data: - Distance between centers / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8500 mm - Width: 1800 mm - Height: 1800 mm Gisdjiwa Iaspfx Ah Aot - Net weight: 8000 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder. Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital read out for 2 axes, incl. display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: naujas, Spare Parts for POREBA Lathes A comprehensive stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. – Gears, shafts and gear wheels – Rack bars – Lead screws and feed shafts with nuts – Cross-slide screws with nuts – Electromagnetic clutches and brakes, brush holders – Pumps, filters, motors – Steady rests and follow rests – Tailstock quills – Tool holders – Lathe chucks Gijdpfov R Uaujx Ah Ast Contact us for further information.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/5M has been thoroughly rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance criteria of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Available from stock, under power, can be inspected at any time Technical data: - Distance between centers / Turning length: 5000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Overall length: 7500 mm Width: 1800 mm Height: 1800 mm - Total weight: 7300 kg Godpewk Iq Eofx Ah Asit Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1984, veleno greitis (maks.): 800 aps./min, ašies variklio galia: 16 000 W, bendras aukštis: 1 800 mm, bendras svoris: 7 300 kg, ašių skaičius: 2, Šios "Poreba TPK 90/5M" horizontalios tekinimo staklės pagamintos 1984 m. Jos lova pasukama virš 930 mm, suklio kiaurymės skersmuo - 95 mm, o su dviem stabiliomis atramomis galima apdirbti iki 9 000 kg sveriančius ruošinius. Jame yra galinis staklių staklės, aušinimo skysčio siurblys, griebtuvo apsauga ir įrankių laikiklis. Apsvarstykite galimybę įsigyti šias horizontalias tekinimo stakles "Poreba TPK 90/5M". Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. Papildoma įranga • Standartinė įranga apima aušinimo skysčio siurblį, griebtuvo apsaugą, įrankių laikiklį • Papildoma įranga: 3 arba 4 žandikaulių griebtuvas, įvairūs skersmenys ir versijos • Skaitmeninis rodmuo (DRO) 2 ašims, įskaitant ekraną, montavimą ir kalibravimą • Tvirta atrama 40–400 mm su ritinėliais Gisdeyaqinopfx Ah Ast • Tvirta atrama 400–600 mm su ritinėliais • MULTIFIX greito keitimo įrankių laikiklis Mašinos privalumai Techninės mašinos privalumai • Atstumas tarp centrų / tekinimo ilgis: 5000 mm • Tarpas tarp sūpynių: 1200 mm • Didžiausias ruošinio svoris tarp centrų: 6000 kg • Didžiausias ruošinio svoris tarp centrų + 1 atrama: 7500 kg • Didžiausias ruošinio svoris tarp centrų + 2 atramos: 9000 kg • Maitinimo kartų skaičius: 80 • Padavimo diapazonas (mm/aps. ): - išilginis: 0,1–12,8, - skersinis: 0,05–6,4 Papildoma informacija Įrenginys pilnai suremontuotas. Suteikiama 12 mėnesių garantija. Dimensions Machine Depth 7500 mm

Būklė: naudotas, Sukimo skersmuo virš staklių lovos: 930 mm Sukimo skersmuo virš atramos: 630 mm Sukimo ilgis: 6000 mm Sukimo skersmuo išpjovoje: 1250 mm Veleno skersmuo: 95 mm Greičiai: 8-800 (x24) aps./min Bendras galios poreikis: 22 kW Staklių svoris apie: 1100 t 4 žandų griebtuvas 2 x atraminiai įtaisai Aušinimo sistema Kūgių tekinimo priedas Techniniai duomenys pateikiami gamintojo arba eksploatuotojo ir mums nėra įpareigojantys. Tarpinis pardavimas galimas; galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų staklių sandėlyje daugiau nei 15 000 m² sandėliavimo plotas, krano keliamoji galia 70 t daugiau nei 10 000 priedų jūsų dirbtuvėms Gisdpfoyuqd Uox Ah Aot Jeigu norite parduoti stakles, gamybos linijas ar įmonę – kreipkitės į mus. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūros galimos pagal susitarimą. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 930 mm Swing diameter over support: 630 mm Turning length: 6000 mm Swing diameter in gap: 1250 mm Spindle bore: 95 mm Speed range: 8 - 800 rpm Total power requirement: 25 kW Space requirement approx.: 9 x 2 x 1.9 m Faceplate Giodpjvndddefx Ah Ast 2 steady rests Coolant system Taper turning attachment

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, This universal lathe is thoroughly overhauled and modernized by our specialists in our workshop, based on order specifications. The machine fully meets all technical standards and parameters of a comparable new machine of this type. It will be ready for collection within a maximum of 3 to 3.5 months from the customer order date. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing over bed [mm]: 930 mm - Swing over cross slide [mm]: 650 mm - Swing in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Distance between centers [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6,000 kg - Max. workpiece weight with 1 steady rest [kg]: 7,500 kg - Max. workpiece weight with 2 steady rests [kg]: 9,000 kg - Number of spindle speeds: 21 - Speed range [rpm]: 8–800 - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Gedekh D Txjpfx Ah Aoit Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 4 000 mm, bendras ilgis: 6 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 6 400 kg, The universal lathe PORĘBA TPK-90A1/4M has undergone a comprehensive rebuild and modernization by us. It features technical specifications that comply with the technical and operational documentation of a new machine, meets technical acceptance criteria as per WOT and the Polish standard, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: in stock, under power, available for inspection at any time Technical data: - Centre distance/turning length: 4000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg Gsdsykzvyjpfx Ah Aeit - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 6500 mm Width: 1800 mm Height: 1865 mm - Total weight: 6400 kg Standard equipment: tailstock, coolant pump, chuck guard, toolpost (without steady rests) Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 8 000 mm, bendras ilgis: 10 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 9 200 kg, The universal lathe PORĘBA TPK-90A1/8M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the documentation of a brand-new machine, meets WOT technical acceptance conditions and Polish standards, and also complies with EU requirements. Giodpfx Ajyi U Rbjh Ajt The machine comes with a full 12-month warranty on spare parts and electrical systems. Availability: in stock, connected to power, available for inspection at any time. Technical data: - Distance between centers/Turning length: 8000 mm - Swing over bed: 930 mm - Swing over carriage: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Installed inverter/variable frequency drive for soft start - Overall dimensions: - Total length: 10,500 mm - Width: 1,800 mm - Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder (without steady rests) Additional equipment available for extra charge: - 3- or 4-jaw chuck, various diameters and versions - Digital read out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - MULTIFIX quick-change tool post

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 4 000 mm, ruošinio svoris (maks.): 6 000 kg, The universal lathe PORĘBA TPK-80/4M has been comprehensively rebuilt and modernized by us. It features technical specifications that comply with the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also fulfills all EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, connected to power, available for inspection at any time. Technical data: - Distance between centers/turning length: 4000 mm - Swing over bed: 800 mm - Swing over saddle: 530 mm - Swing in gap: 1080 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 6000 mm - Width: 1800 mm - Height: 1800 mm - Total weight: 6200 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Additional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and variants - Digital Read Out for 2 axes, incl. display, installation, and calibration Gijdpfx Ajy N R Iwjh Ast - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick change tool post

Būklė: naudotas, Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 10 000 mm, For sale: Universal Lathe PORĘBA TPK-80/10M, year of manufacture 1983, in very good technical condition. Availability: In stock, under power, available for inspection and test run at any time. Godpfx Ahjyxgm Ue Aeit Standard equipment: - Tailstock - Coolant pump - Tool holder Additional equipment: - 1 x travelling steady rest - 1 x steady rest 40–400 mm - 1 x steady rest 400–600 mm - 1 x 3-jaw self-centering chuck, Ø 500 mm Technical data: - Centre distance / Turning length: 10,000 mm - Swing over bed: 800 mm - Swing over carriage: 530 mm - Swing in gap: 1,080 mm - Spindle bore: 95 mm Max. workpiece weight: - Between centres: 6,000 kg - Between centres + 1 steady rest: 7,500 kg - Between centres + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: - Longitudinal: 0.1 – 12.8 mm/rev - Cross: 0.05 – 6.4 mm/rev Motor power: 16/22 kW (1st/2nd gear) Dimensions: - Length: 12,500 mm - Width: 1,800 mm - Height: 1,800 mm Weight: 11,200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 630 mm, veleno skylė: 320 mm, tekėjimo skersmuo: 1 200 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekėjimo ilgis: 3 000 mm, Lathe in very good technical condition; it has seen very little use and was not utilized for pipe machining. The Poręba TPL 90/3m lathe (commonly listed in the market as a TPK 90 series variant) is a textbook example of an oil country lathe (Hollow Spindle Lathe). This model meets all specific criteria for machines intended for the Oil & Gas sector. • Large Spindle Bore: Machines in this version feature a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows thick-walled drill and casing pipes to pass freely through the spindle. • Dual Chuck System: The headstock design allows the installation of two independent lathe chucks (front and rear, typically 28" diameter), which clamp and stabilize the pipe at both spindle ends. • Optimal Working Dimensions: The '3m' designation defines the between-centers turning length (3000 mm), combined with a swing over bed diameter of 930 mm (hence the '90' in the name), enabling machining of massive pipeline components. • Extreme Rigidity: FUM POREBA machines are renowned for their monolithic, very wide, and heavy cast iron beds, effectively damping the huge vibrations arising during taper thread turning. In international used machinery listings, this particular Poręba model is classified directly under the 'Oil Field Lathes' category. TECHNICAL DATA: Geometric parameters and machining ranges: • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing over gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock: • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5") • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system: • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Thread types cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock: • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" • Quill internal taper: Morse No. 6 (MT6) Drive and machine dimensions: • Main motor power: 22 kW / 29.5 HP • Overall machine length: approx. 5500 mm / 216.5" • Overall machine width: approx. 1750 mm / 68.9" • Overall machine height: approx. 1500 mm / 59.0" Gsdpfsy Sf Azsx Ah Aoit • Total machine weight: approx. 8000 kg / 17,630 lbs

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The PORĘBA TPK-80/3M universal lathe has been extensively rebuilt and modernized by us. It features technical parameters that correspond to the specifications and operational documentation of a new machine, meets the technical acceptance standards of WOT and Polish norms, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, available for inspection at any time Technical Specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg Godpfx Ajfknw Rsh Aoit - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 5,000 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 6,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, vidinis skersmuo: 900 mm, Nauja atraminė galva (luneta) konvencinėms POREBA TR tekinimo staklėms – Ø 700–900 mm, su ritinėliais Parduodama nauja atraminė galva, skirta konvencinėms POREBA TR serijos tekinimo staklėms. Gisdoy Enngspfx Ah Ast Atraminė galva aprūpinta ritinėliais, kurie užtikrina stabilų ruošinio palaikymą apdirbimo metu. Techniniai duomenys: Skersmens diapazonas: 700–900 mm Tipas: ritininė atraminė galva Būklė: nauja Aprašymas: Ideali ilgiems ir sunkiems ruošiniams apdirbti. Pagerina apdirbimo tikslumą ir sumažina vibracijas.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekėjimo skersmuo: 900 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekinimo skersmuo virš viršutinio vežimo: 570 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-90B/5M has been extensively rebuilt and modernized by us. It features technical specifications that match those found in the technical and operational documentation of a new machine, complies with the WOT technical acceptance standards and Polish norms, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: general overhaul to order, delivery time 3.5 months from order confirmation Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 900 mm - Swing over cross slide: 570 mm - Swing in the gap: 1,150 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between support points + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Gisdpfx Ahjnnz Sxe Ast Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 750 mm, tekinimo skersmuo virš slankiojančio stalo: 1 750 mm, tekinimo skersmuo virš viršutinio vežimo: 1 420 mm, tekėjimo ilgis: 10 000 mm, bendras ilgis: 12 500 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 300 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The PORĘBA TR-175B2/10M universal lathe has been extensively refurbished and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and the Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: general overhaul to order, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 10,000 mm - Swing diameter over bed: 1,750 mm - Swing diameter over saddle: 1,420 mm - Swing diameter in gap: 2,080 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplate and 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Overall length: 12,500 mm - Width: 2,130 mm - Height: 2,300 mm - Total weight: 19,700 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: Gijdpfx Ahey N Sans Ajt - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 670 mm, tekėjimo ilgis: 3 000 mm, tekėjimo skersmuo: 800 mm, AVAILABLE FROM STOCK. Technical specifications of CNC lathe with slant bed Model: TOK-80 CNC x 3m or 4m, offered after complete refurbishment: MANUFACTURER: FUM POREBA - Year of refurbishment ("ZAK"): 2026 Giedpfxegpg I Re Ah Ast - Swing over bed: 800 mm - Swing over carriage: 670 mm - Turning length: 3000 mm (immediately available) or 4000 mm (under refurbishment) - Spindle bore: 95 mm - Main motor: 55 kW - CNC control system: Siemens - Sinumerik 840 D sl (brand new) - Tooling system: 12-position automatic turret - Workpiece weight between centers: 6000 kg - Workpiece weight in chuck: 800 kg - Number of spindle speeds: 2 - Spindle speed range: 4–800 rpm - Tailstock quill diameter: Ø 180 mm - Tailstock quill travel: Ø 150 mm - Rapid traverse in Z and X axes: 5000 mm/min - Cross slide travel: 410 mm - Longitudinal travel: 3000 mm or 4000 mm - Machine dimensions (for 3m version): H - 2900 mm, W - 2705 mm, L - 8135 mm - Machine weight: 24,000 kg (for 3m turning length)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, vidinis skersmuo: 900 mm, Naujas lunetė konvencinėms POREBA TR-115 tekinimo staklėms – Ø 450 mm, su ritinėliais Parduodama naudota lunetė, skirta POREBA TR-115 serijos konvencinėms tekinimo staklėms. Lunetė aprūpinta ritinėliais, kurie užtikrina stabilų ruošinio palaikymą apdirbimo metu. Techniniai duomenys: Skersmens diapazonas: 450 mm Tipas: ritinėlių konstrukcija Būklė: naudota Gijdpfxoy E Nxms Ah Aot Aprašymas: Idealiai tinka ilgų ir sunkių ruošinių apdirbimui. Pagerina apdirbimo tikslumą ir sumažina vibracijas.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 1 000 mm, veleno skylė: 130 mm, tekėjimo skersmuo: 1 350 mm, tekėjimo ilgis: 3 000 mm, Status: undergoing major overhaul. The PORĘBA TR-135 lathe is a universal machine tool designed for both roughing and finishing operations. It is ideally suited for turning shafts as well as heavy and oversized components. Giodpfxoyh H Iys Ah Ajt The machine offered is currently undergoing a complete overhaul – the last photograph shows its present state. The remaining photos depict TR series lathes after overhauls carried out by our company and delivered to end users, serving as a reference for the target quality and workmanship standard. Scope of overhaul: - Complete disassembly of the lathe - Refurbishment and replacement of worn components - Calibration of leadscrews and manufacturing of new bronze nuts - Replacement of all bearings and plain bearings, including new spindle bearings - Grinding of bedways, cross slides, and compound slides, followed by hand scraping of mating surfaces (using friction materials) - Refurbishment of the tailstock quill - Refurbishment of the tool post - Overhaul and modernization of lubrication and cooling systems - Electrical scope: manufacturing a new control cabinet, complete new wiring of the machine, and replacement of all electrical components with new ones - Inspection of electric motors and replacement of bearings with new ones - New paintwork - After completion of the overhaul: trial assembly, preliminary acceptance at our facility, installation on foundation, leveling, and final acceptance - Adaptation of the lathe to meet minimum safety requirements in accordance with applicable EU Directives

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TCG 160 x 5M, sukimosi skersmuo virš skersinio stumduko: 1 280 mm, veleno skylė: 105 mm, tekėjimo skersmuo: 1 600 mm, disko skersmuo: 1 600 mm, TEKINYS PRIEINAMAS IŠ SANDĖLIO Gsdpfx Ahjvw Uu Ss Aeit Sunki dvigubų kreipiamųjų tekinimo staklės TCG yra universali mašina, leidžianti atlikti grubų ir baigiamą tekinimą, gręžimą, sriegimą, kūginių paviršių tekinimą, gręžimą bei sunkių ir labai sunkių detalių apdirbimą vienu prispaudimu. TCG tekinimo staklės skirtos dirbti su ruošiniais, kurių skersmuo iki 1600 mm. Konstrukcijos sistema ir tvirtumas leidžia tekinimą dideliu drožlių skerspjūviu ir užtikrina didelį paviršiaus lygumą bei minimalią ruošinio ovalizaciją. Staklės yra mūsų įmonėje ZAK, Zakładowa 2, Poręba (Lenkija). Kviečiame teirautis.

Būklė: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 630 mm, tekėjimo skersmuo: 1 500 mm, tekinimo skersmuo virš slankiojančio stalo: 1 000 mm, Parduodama naudota horizontalioji tekinimo staklė PORĘBA TRC-100, geros techninės būklės, visiškai veikianti, komplektuojama su 1 500 mm 4-žandų paštu. Techniniai duomenys: - Tekinimo skersmuo tilto išėmoje: 1500 mm - Bendras tekinimo ilgis: 1000 mm - Tekinimo ilgis tilto išėmoje: 480 mm - Tekinimo skersmuo virš lovos: 1000 mm - Tekinimo skersmuo virš skersinio vežimo: 630 mm - Veleno perėjimo skersmuo: 130 mm - Apsisukimų dažnis (aps./min): 5 – 500 - Pjovimo padavimai (mm/aps.): Išilginis: 0,045 – 6 Skersinis: 0,022 – 8 - Variklio galingumas: 22/28 kW (1/2 pavara) - Bendri matmenys: Bendras ilgis: 2700 mm Giodpjy Efbwofx Ah Aet Plotis: 2130 mm Aukštis: 1400 mm - Bendras svoris: 8000 kg

Būklė: naudotas, Gamybos metai: 1972, Sukimosi ilgis: 5 500 mm Skersmuo virš staklių lovos: 800 mm Maksimalus skersmuo virš planšyros: 500 mm Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungtas prie elektros pagal susitarimą. Gjdpfx Ahoy Nn Egs Aoit Priedai, nuotraukose matomi įrankiai ir tvirtinimo priemonės priklauso komplektacijai tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai, klaidos bei tarpinis pardavimas galimi!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, sukimosi skersmuo virš skersinio stumduko: 1 600 mm, tekėjimo ilgis: 6 000 mm, tekėjimo skersmuo: 1 300 mm, ašies variklio galia: 100 000 W, bendras aukštis: 2 875 mm, bendras ilgis: 9 550 mm, bendras plotis: 2 950 mm, ruošinio svoris (maks.): 40 000 kg, Sukinys virš staklės: Ø 1600 mm Sukinys virš vežimo: 1300 mm Sukimo ilgis: 6000 mm Veleno galia: 100 kW Pinolės skersmuo: Ø 280 mm Gijdpeymk E Ajfx Ah Aot Pinolės eiga: 200 mm Detalės svoris: 40 000 kg Galia: 125 A Sukimosi greitis: 250 aps./min. Matmenys (apytiksliai): Ilgis: 9550 mm Plotis: 2950 mm Aukštis: 2875 mm Svoris: 41 000 kg Atkreipkite dėmesį: informacija šiame puslapyje pateikta pagal mūsų geriausias žinias ir, kiek įmanoma, gauta iš gamintojo. Informacija pateikta sąžiningai, tačiau tikslumas negali būti garantuotas. Todėl pateikti duomenys nėra laikomi sąlygų ar garantijų pagrindu. Rekomenduojame patikrinti visus svarbius duomenis.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Gjdpfxsv Ab Dqe Ah Asit Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control