Atsarginės dalys

ZMM Bulgaria: Drehmaschinen CU-Serie (z.B. CU 400, CU 500, CU 580) C

Sąlyga: naudotas, various types available Kodpfjdc A Sbex Af Ijwt

Sąlyga: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Kedpsvav Sdsfx Af Iswt Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Ksdpekvnumefx Af Ijwt Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Sąlyga: naudotas, Gamybos metai: 1961, Ram weight 750 kg Ram stroke 660 mm Blows per minute 100 /min Blow energy 2040 kJ Distance from saddle to bottom edge of ram guide 6600 mm Throat depth 750 mm Steel forging – Rectangular up to 240 mm Steel forging – Diameter up to 270 mm Drive power 75.0 kW Hammer weight 16.5 t Anvil weight 15.5 t Ksdpfx Afevuullo Iewt Total weight 32.0 t Space requirements (WxDxH) 3.2 x 1.45 x 3.45 m Forging hammer Operation: pneumatic Can only be offered in our warehouse without being put into operation – video available from consignor prior to disassembly.

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Kwedpfxsg Ip Efj Af Iot Blade length: 225 x 225 mm Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: naudotas, Gamybos metai: 1995, tekinimo skersmuo virš slankiojančio stalo: 500 mm, Universal Lathe Make: ZMM Type: 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Distance between centers: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolholder Ksdpfxewudhuo Af Ijwt • Live center • Coolant pump • Machine lamp All information subject to change. A powered demonstration is possible at any time in our showroom.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, slėgis: 13 juosta, darbinis slėgis: 13 juosta, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Model: U-HD Heating surface approx.: 53 m² Capacity: 3,200 kg/h Max. operating pressure: 13.00 bar Increased test pressure: 24.05 bar Water content at normal level approx.: 2,650 l Total water content approx.: 3,770 l Year of manufacture: 1996 Equipped with Weishaupt combination burner for gas/oil, gas control line, control cabinet (mounted on boiler body), feed water pump, and the existing coarse and fine fittings. Kedpfev I Rpasx Af Ijwt

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1991, plieno lakšto storis (maks.): 16 mm, pjovimo ilgis (maks.): 6 000 mm, HIDRAULINĖ ŽIRKLĖS LVD MVSB 62/16 Serijos numeris: 18478 Pagaminimo metai: 06/1991 TECHNINĖS SPECIFIKACIJOS Maks. lakšto storis St45: 16 mm Pjovimo ilgis: 6200 mm Atstumas tarp statramsčių: 6400 mm Pjovimo tarpas: 60 mm Atatramio liniuotės diapazonas: 1000 mm Mažiausias pjovimo kampas: 0,5 ° Didžiausias pjovimo kampas: 2,5 ° Mažiausias pjūvių skaičius per min.: 6 Kjdpjumhm Asfx Af Iewt Didžiausias pjūvių skaičius per min.: 25 Mažiausias peilio tarpas: 0,05 mm Didžiausias peilio tarpas: 1,6 mm Variklio galia: 30 kW Apytikslis svoris: 35 000 kg Matmenys (IxPxA): 7100 x 2400 x 3000 mm Komplekte pridedama: - ELGO P85 "GO-TO" užpakaliniam liniuotės valdymui - Elektrinis užpakalinės liniuotės reguliavimas, 1000 mm - 1 priekinė atrama, 2 m, viena su 90° kampine atrama, priekinė atrama L2000 mm - Pedalinis jungiklis - Voleliai ant stalo - Pakreipiama užpakalinė liniuotė su rankine hidrauline pompa

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition. Kjdpfx Aevi Hryjf Iswt

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 4 189 h, kuro tipas: dyzelinas, stiebo tipas: dupleksas,