Tekinimo staklės-įprastos-elektroninės

ZMM C10TM/3000

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length: facing: 165 mm / transverse: 160 mm Centre height over bed: 200 mm Gap length: no gap mm Spindle speed range: 48 - 1,500 / 10-step rpm Work spindle bore: 40 mm Cpjdpfxeu Ixydo Aahew Feeds: longitudinal: 0.021...2.34 mm / transverse: 0.09...1.6 mm Tailstock quill taper: MK 4 Tailstock quill stroke: 125 mm Total power requirement: 2.2 kW Approx. machine weight: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change toolholder - Foot brake - Coolant pump (delivery exclusive)

Gamybos metai: 2013, būklė: labai geros būklės (naudotas), Gas burner Weishaupt WM-G10/3-A We have 8 units in stock Output: 630kW–1200kW 2x Year: 2007 WMG10/3-A 2x Year: 2010 WMG10/3-A 1x Year: 2011 WMG10/2-A 1x Year: 2011 WMG10/4-A 1x Year: 2009 WMG10/3-A 1x Year: 2013 WMG10/3-A Мы говорим по-русски! (We speak Russian!) Viewing only by prior telephone arrangement! Preferred sale to dealers, businesses, or for export. All information subject to change, errors and prior sale excepted. The seller assumes no liability for typing or data transmission errors. Cpodji Atp Sjpfx Aahew We will gladly purchase your used boiler or burner! Of course, we can also take care of all formalities. Loading available.

Būklė: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Cpjdefnh Tgepfx Aahew Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Būklė: naudotas, x-axis travel: 6500 / 13,150 mm y-axis travel: 4000 mm z-axis travel: 1250 mm w-axis travel: 2250 mm Control system: Sinumerik 840 D Clamping table area: 5500 / 12,150 x 3000 mm Clearance between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – infinitely variable: 6.3 – 4000 rpm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z: 24,000 mm/min Total power requirement: 120 kVA Machine weight: approx. 245 t Space requirement: approx. 29 x 7.7 x 8.1 m The machine is in nearly new condition and was completely overhauled and modernized in 2020 for 1.6 million euros! Equipment/Accessories: - Automatic tool magazine for 153 tool pockets - Automatic milling head magazine for 6 milling heads - Machining modules / Milling heads: Machining module – straight – straight long – Machining module – standard angle – 4000 rpm, 144 x 2.5°, ISO 50 Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm - C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 - Coolant unit Cpodpfxjwa Dx Rs Aahsw - Chip conveyor - Technical documentation

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Cyklop XZE-311 Strapping Press Year of manufacture: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Strap guide distance: 625 / 440 mm Roller pitch: 60 mm Strapping speed: 2.9 m/s Strapping unit tension force: adjustable up to 2000 N Cpodpfxotqpado Aahjw Pressing force: adjustable from 5 to 48 kN

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Baujahr: 1974 / (Modernisierung 2022) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Cpjdpfxjq U R T Nj Aahow Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. Codpshzbipjfx Aahspw - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 2024, būklė: naujas, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2,550 mm Sheet thickness: 4 mm Control unit: EZM9910 Operating hours: 0 Cpjdpfx Aaed R Er Dohsw Cutting angle: 1°30' Strokes per minute: 42 Motor power: 7.5 kW Back gauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3,200 x 2,300 x 1,350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Back gauge with 750 mm range, programmable via control unit - Polyamide inserts for hold-down devices - 1 side gauge and 2 support arms for sheet metal - Finger guard - Portable foot switch with emergency stop - Spring-mounted stop in the T-slot of the support arms - Ball screw spindle - Table sheets with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment. Additional machines are also available for demonstration at our facility in Staufenberg. Further information is available on request.

Būklė: naudotas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at front for pinch protection - 3 material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very heavy-duty machine with extremely robust construction Base machine space requirement (L x W x H): 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Cpsdpfx Aod Hxx Aoahew Space required for transport (base machine): 4650 x 2610 x 3200 mm Space required for transport (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau; test cuts possible. Currently, the hold-downs are being resealed; the resulting price adjustment will be made in the next few days.

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm Csdpfx Aajlgvkijhjpw - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm