Traub Tna480 Tx8D pirkti naudotą (95)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, veikimo valandos: 49 274 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 247, tekėjimo ilgis: 80 mm, veleno greitis (maks.): 12 000 aps./min, padavimo ilgis X ašis: 35 mm, padavimo eiga Y ašimi: 37 mm, padavimo ilgis Z ašis: 75 mm, Strypo skersmuo (maks.): 12 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter Spindle Podpfx Adjvrz E Hsxogu Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Tool Turret I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø 25 mm Live tooling: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Live tooling: 12,000 rpm, 4 kW, 7 Nm Number of live stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Footprint: 7,943 x 1,430 x 1,480 mm Control powered-on time: 96,171 h Powered-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump (KSS pump) - Raw material feed: Bar loader, FMB minimag 3200 - Finished parts discharge: Workpiece discharge device (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various fixed and driven holders

Sąlyga: geras (naudotas), Gamybos metai: 1996, CNC turning center TRAUB Type: TNC65 DG Year: 1996 Control: TRAUB TX8F Pjdpfju Eug Iox Adxjgu Comes with extensive accessories.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Pgodpfx Adjwuddvoxou Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x powered tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, part gripper, bar loader Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. Machine geometry has been checked and adjusted/set up. Pgjdpfx Ajwi I Eyjdxju The machine can be inspected under power – video also available. Warranty 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the spare parts, not for downtime or labor hours, travel time. The warranty expressly does not cover any parts other than those mentioned above, e.g. wear parts, electrics, electronics, hydraulics, etc.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Multi-spindle & bar automatic lathe TRAUB TD 26 Year: 1991 * Power at spindle: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4,750 rpm * Total power: 3.2 kW * Length (L – R): 1,800 mm * Width (F – R): 1,000 mm * Height: 1,400 mm * Weight: 800 kg * Toolholder positions: 6 tools Additional information * Max round stock: 26 mm * Max square stock: 18 mm * Max hexagonal stock: 22 mm Pgsdpfx Aewc Aqwsdxju * Bar feeder included

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 37 000 h, Funkcionalumas: visiškai funkcionalus, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer's tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see pictures) - Breuer bar loader (1200mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 [kW] - Spindle speed: 5,000 [rpm] - Max. bar diameter: 65 [mm] - Max. main spindle chuck diameter: 175 [mm] - Minimum C-axis resolution: 0.001 [degrees] Psdpfewm Igfsx Adxjgu SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel range: 700 [mm] LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 95 [kW] WEIGHT AND DIMENSIONS - Required space: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Sąlyga: geras (naudotas), Gamybos metai: 1989, 1 x automatic lathe Traub TD 16 Year of manufacture: 1989 with hydraulic single bar feeder Pjdpfx Adovga A Tsxjgu LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position star turret Quick-release collet system Long turning device Vogel central lubrication system Accessories: see photos The machine can be inspected under power.

Sąlyga: nepatikrintas (naudotas), Traub TNL 12/7 Podpfx Asvk Tl Nodxsgu

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1994, veikimo valandos: 8 000 h, Funkcionalumas: nepatikrintas, Machine in good condition. Pgedpfx Adov Im Sdoxsu

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 Pgsdpfswi Izhjx Adxju • 2x 10-station turrets with live tooling drive VDI30 • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.

Sąlyga: labai geros būklės (naudotas), Multi-spindle & bar automatic lathes TRAUB TK 42 * Spindle drive power: 5.5 – 9 kW * Maximum workpiece length: 206 mm * Spindle bore: 42 mm * Length (L–R): 2500 mm * Width (F–B): 900 mm * Height: 1700 mm * Tool turret: 4 slides Pjdpfx Adswc Aqdoxegu

Sąlyga: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Pgjdpewp D Nbofx Adxou Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm (2-step) Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours (power-on hours): 8,834 h Pgedpfxsu Rqabo Adxou Tailstock quill taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH) approx.: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setting

Gamybos metai: 1978, Sąlyga: naudotas, Article: Program-controlled automatic lathe Brand: Traub Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Pjdpsl Rmqtjfx Adxjgu Please contact us for further information and images via email(at) or

Sąlyga: labai geros būklės (naudotas), Traub TNL12 CNC Swiss Talpa: 12 mm Darbo valandos: 25 596 val. Kraft & Bauer gaisro gesinimo sistema Popierinis filtras: kompaktiškas juostinis filtras Sukonfigūruota kaip parodyta nuotraukoje (daugiau nuotraukų vėliau) Eksploatuojama nuo 2009 m. (pradžioje demonstracinis modelis) 12 pėdų FMB strypų padavėjas Miglos surinkėjas Drožlių transporteris Pgsdpew R E Adefx Adxou „Yra 2 staklės“

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 51 400 h, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of Manufacture: 2011 Control: TX 8i-s Main / Sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Pjdpfxjwxc Hke Adxsgu Brief loader: Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Podpfewc Amxsx Adxogu Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Bar loader included!

Sąlyga: naudotas, Gamybos metai: 1993, Techninė informacija: x eiga: 400 mm y eiga: 300 mm z eiga: 400 mm Veleno greitis: 8000 aps./min Valdymas: Fanuc OM Tvirtinimo stalas: 500x300 mm Žurnalų vietų skaičius: 16 vnt. Įrankio tvirtinimas: SK40 Podpfx Aou Idn Hsdxjgu Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks.: 50-450 mm Padėklų kiekis: 2 vnt./detalė Bendras galios poreikis: 10 kW Mašinos svoris apytiksliai: 2,5 t Mašinos matmenys (IxPxA): 2,4x1,8x2,5 m Transportavimo matmenys: 2,45x1,8x2,5 m - Elektros spinta - Aušinimo įranga - Drožlių transporterio gamintojas META (transportavimo aukštis 1500 mm; plotis 200 mm) Stalo keitimo funkcija neveikia.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Traub TNX 65/42 Centro di tornitura e fresatura Anno di costruzione: 2007 N. di serie: 7060107 Entrata in servizio: 2010 Controllo TX 8i-S (controllo basato su Mitsubishi/Traub con motori e azionamenti Mitsubishi) 15 assi CNC 4 torrette X-Y-Z ciascuna con 10 posizioni. Fino a 20 utensili per torretta Pgjdpfxsq Npqms Adxou Mandrino principale e contromandrino con foro passante da 65 mm (contromandrino con lavaggio refrigerante) Comando a pedale per serraggio/sgancio dei mandrini Ricevitore portale azionato da servomotore Sistema di rotazione idraulica con pinza pneumatica per pezzo finito e residuo barra Nastro trasportatore per pezzi finiti Filtro refrigerante a nastro cartaceo RESY Vasca del refrigerante Knoll con controllo della temperatura mediante gruppo frigorifero BKW Pompe del refrigerante ad alta pressione 20 bar e a bassa pressione 8 bar Evacuatore trucioli Knoll Caricatore di barre FMB Turbo 5-55 (nuovo del 2010) 2 portautensili tornitura singoli 2 portautensili tornitura doppi 1 portautensile di troncatura 1 portautensile motorizzato doppio radiale ER portapinza 1 portautensile motorizzato radiale ER portapinza 4 portautensili motorizzati radiali ER portapinza 1 portautensile motorizzato radiale porta frese cilindriche 1 portautensile motorizzato radiale ER portapinza orientabile 2 portautensili motorizzati radiali porta frese a disco 2 portautensili motorizzati assiali porta frese cilindriche 6 portautensili motorizzati assiali ER portapinza 43 ulteriori portautensili su elenco separato (vedi allegato supplementare) Mandrino principale Hainbuch con autocentrante portapinza Contromandrino Rohm autocentrante a 2 griffe 2 set di viti a ricircolo di sfere asse Z e pacchi cuscinetti di ricambio

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 – 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on hours): 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm, hydraulic clamping Operation via dual foot switch and control panel/operator panel. Coolant system The Traub features an integrated chip conveyor with an ejection height of 1,100 mm (currently non-functional). Accessories: various small parts Psdpsu Ix N Sofx Adxogu 8 assorted leveling feet without tailstock as is.