CNC tekinimo staklės

Traub TNC 42/65 DGY

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 11 000 mm, bendras plotis: 2 000 mm, bendras svoris: 6 000 kg, valdiklių gamintojas: TRAUB, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, įrankių magazino lizdų skaičius: 10, - Includes two 10-position tool turrets with live tooling stations - Includes HAINBUCH chucking system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via sub-spindle - Max. sub-spindle speed: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Max. thread pitch: 999.999 mm - Max. radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool offset pairs: 40 CNC TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL CARRIERS 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm Hnodpfx Aswpa Ruof Ieg - Tool holder/tool carrier positions: 10 (14) - Cylindrical shank per DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Index time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Infinitely variable 3-phase motor: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw drive: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool carrier: Single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to occasional usage, operating hours may vary slightly.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Machining Center – Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of manufacture: 1999 The machine can be inspected under power and in operation by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (like new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/Axis drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min Hnedpfx Afsv Nxbyj Ieg - Rapid traverse X, Y, Z: 30 m/min - Ballscrew diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Path measuring system: - Input resolution: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine stations: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (fixture weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (like new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of technical details and equipment. - Subject to prior sale -

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Hnedpfxjv Scrbo Af Iog

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 18770, valdiklio modelis: TX 8F, spaustuvo skersmuo: 65 mm, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, ruošinio skersmuo (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. speed of counter spindle: 4,000 rpm Counter spindle power: 11 kW Constant power range (counter spindle): 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool mount: ∅ 30 x 55 mm (25 x 48 mm) Chisel cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time for one station: 0.6 s Indexing time for 5 stations: 1.5 s Input and output resolution X/Z: 0.001 mm Input and output resolution C-axis: 0.001° Fine interpolation cycle: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main spindle and counter spindle C-axis): ± 3 min Rapid traverse and feed rate: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control system: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator's position: 71 dB(A) Ambient temperature range: 5 – 40°C Max. humidity: 70% System pressure (hydraulics): 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Hjdoxpgl Aspfx Af Iong Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder by STAMAG Chip conveyor

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Hsdpovivx Nsfx Af Ieng Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, New diesel generator set, generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 Hnsdpfx Aexlkq Uef Ijg New, unused, year of manufacture 2025 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz / 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load approx. 11 liters/hour Fuel consumption in standby approx. 4 liters/hour Drive engine 4-cylinder in-line diesel engine RICARDO ZH4105ZD Engine output at 1500 rpm: 45 kW Engine output at 1800 rpm: 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminal strip for cable connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, for automatic emergency power switching in the event of a power failure Space requirements L x W x H: 2150 x 950 x 1200 mm Weight: 900 kg Unopened stock machine

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hsdpfevnd Suex Af Ieng

Sąlyga: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 119 571 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, greitasis eiga Z ašyje: 45 000 m/min, valdiklio modelis: Siemens 840 D, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 119571 h, veleno įjungimo laikas: 56792 h - HSK-A63 veržlė, 10 000 aps./min - 32 įrankių vietos - Apvalusis stalas SRT 280 mm su integruota spaudimo sistema HSK100 (jei nereikalinga, gali būti uždaryta arba perkonstruota kaip nulinės padėties spaudimo sistema) - Išorinė aušinimo skysčio tiekimo sistema - Vidinė aušinimo skysčio tiekimo sistema su popierine juostine filtra, 80 bar - Drožlių nuplovimo pistoletas - Drožlių transporteris - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos + dar 87 papildomos vietos ZM87 - Šiluminė kompensacija - BLUM įrankių matavimo sistema (Wange) - Renishaw matavimo zondas - Drožlių konteineris - Būklės indikatorius Hjdpfexcp Srjx Af Isng Mašina buvo visiškai patikrinta, yra geometrijos protokolas ir apskritimo bandymo matavimai. Mašiną bet kada galima apžiūrėti ir išbandyti įjungtą. Labai gerai prižiūrėta būklė.

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Hnodpfxotzyx Tj Af Isg Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: geras (naudotas), Gamybos metai: 2020, mašinos/transporto priemonės numeris: 164390-0000-Z2724, Offer 24059 Technical Data: - Jaw Type: Step jaws - Jaw Width: 125 mm - Jaw Height: 40 mm - Clamping Range 1: 0 – 216 mm - Clamping Range 2: 97 – 312 mm - Clamping Force: 40 kN - Overall Height: 140 mm - Weight: 33 kg Hnsdpfx Ajrwmkaof Ieg - Minimum Required Space: L 463 x W 126 x H 145 mm