Swiss Speedy pirkti naudotą (13 418)

Būklė: naudotas, Technical details: Bljdju Ng Dgepfx An Hen Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: naudotas, Technical details: Bljdpfx Asvbh N Rjn Hon Turning length: 630 mm Swing diameter over cross slide / rear cross slide: 250 mm Center height over bed: 270 mm Center distance: 900 mm Spindle bore: 26 mm Stepless speed range: 1.8 - 450 rpm Return speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 - 1.11 / 36 steps mm/rev Longitudinal feed: 0.063 - 0.63 / 12 steps mm/rev Tailstock quill taper: MT 5 Quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Primarily for relief turning and relief grinding of cutting tools (especially hobs with or without thread profile). Relief turning and relief grinding is possible from the front, rear, and axial directions of the machine. Main drive via 8-speed manual gearbox. Feed gearbox designed as a 12-stage manual gearbox. Swivel range of the rear cross slide = 360° Swivel range of the cross slide = 360° Equipment: Lathe chuck driver disc Ø 210 mm with fixed center Fixed center in tailstock with 4 machine feet 3-jaw chuck Ø 250 mm i.d.

Būklė: naudotas, Technical Details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubricating unit (LxWxH): 830 x 650 x 1000 mm Dimensions machine approx. (LxWxH): 3.3 x 1.5 x 1.45 m Dimensions control cabinet (LxWxH): 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-handed tension and compression springs as well as torsion springs. Springs can be produced with any desired pitch and coil body shape. Output max. 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length unlimited, feed speed = 27 - 80 m/min. Coiling unit: Two-finger system, wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire intake 3 mm, two-finger Spring length measuring device LION PRECISION-PANTHER Wire reel holder POST, motor-driven, mandrel Ø 1,400 mm Lubricating unit Control cabinet cooler RITA Bodsvc Aklepfx An Holn Hydraulic power unit A wide range of accessories and/or spare parts available on request! i.D.

Būklė: naudotas, Gamybos metai: 1987, Technical details: X-axis travel: 760 mm Y-axis travel: 450 mm Z-axis travel: 500 mm Control: Mazatrol CAM M-2 Tool magazine with: 30 tool positions (chain magazine) Spindle taper: ISO 40 Speed range: 28 - 4500 rpm Infinitely variable feed rates X/Y/Z: max. 2,000 mm/min Spindle torque: approx. 23 Nm Rapid traverse: Bledjvc Avbepfx An Hon - X / Y: 24 m/min - Z: 15 m/min Drilling capacity in steel (diameter): Ø 40 mm Table size: 500 x 1150 mm Table load capacity – central/max: 700 kp Total power requirement: 11 kW (24.4 kVA) Machine weight approx.: 6.8 t Machine dimensions approx. (LxWxH): 3.7 x 2.5 x 2.6 m Chip conveyor: L: 3.7 x W: 0.75 x H: 1.35 m Additional features: - ATC tool magazine for 30 tools up to Ø 100 mm x 330 mm, SK40 - Hinged belt chip conveyor Knoll-120S-1 with discharge height of 1130 mm - Coolant tank with pump, 200-liter capacity, 30 l/min. - Control panel with 2000 mm extension arm - Base plates

Būklė: naudotas, Gamybos metai: 2007, Technical Details: X-axis travel: 1200 mm y-axis travel: 600 mm z-axis travel: 800 mm Distance spindle / table: 125 / 925 mm Control: Heidenhain iTNC 530 Spindle speed: 9000 stepless rpm Torque at spindle: max. 82 Nm Power-on hours: 43,363 h Spindle operating hours: 16,319 h Tool magazine with: 24 slots Table size: 1250 x 630 mm (cross-slide table) Max. table load: 1000 kg Spindle taper: SK40 Spindle motor: 13 kW Feed rate: X/Y/Z: 40/40/30 m/min Rapid traverse: X/Y/Z: 40/40/30 m/min Feed force: X/Y/Z: 7/7/16 kN Interface: yes Total power requirement: 13 kW Bodpevithzefx An Hsln Machine weight approx.: 8.0 t Coolant unit dimensions: approx. L: 1.25 x W: 0.7 x H: 1.56 m Machine dimensions approx. LxWxH: 2.4 x 3.0 x 3.3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: - Compact filter/high-pressure coolant system Knoll - Chip conveyor/scraper belt conveyor 300 mm - Tool changer unit with disc magazine for 24 tools - Electronic handwheel - Operation via Heidenhain control panel Accessories: - AL plate 1200x600x45 mm with Ø 15 mm bores

Gamybos metai: 1998, būklė: naudotas, Temperature: 200-210 °C Throughput speed: 1000 mm/min Maximum workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection reflow soldering system for printed circuit boards (PCBs) Soldering system for PCBs (e.g., SMD and/or mixed technology) and for curing SMD adhesives The soldering system operates with the following processes: loading – preheating – soldering – cooling – unloading. - with software functions - can be integrated into a production line Additional technical specifications: Bodpeu Rwauofx An Holn - Protective atmosphere using nitrogen 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 liters/min; 2 - 5 bar overpressure - Extraction air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L: 6500 + loading station 2000 x W: 1400 x H: 2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with loading head and discharge conveyor for holding, e.g., PCBs. - Machine is CE98 certified System suitable as a source of spare parts or for conversion or extension. Sold as is, at clearance price.

Būklė: naudotas, Gamybos metai: 1976, Technical Details: Table area: 1300 x 190 mm Blodpfsu Sq Emex An Hsn Speed range: 60 – 4000 rpm, stepless Feed stepless: Quill: 0.06 / 0.12 / 0.24 mm/rev Vertical quill travel: 140 mm Spindle taper: SK 40 Spindle head swivels left and right: 90° and 45° Total power requirement: 3.0 kW Approx. machine weight: 1620 kg Machine dimensions (LxWxH): 2.7 x 2.3 x 2.4 m Milling machine with universal milling head Spindle rotation clockwise/counterclockwise Table specifications: X/Y/Z travel: 860/380/460 mm X/Y/Z feed: 40 – 400 mm/min stepless Rapid traverse: 400 mm/min Max. workpiece weight: 30 kg Equipment: 3-axis Mitutoyo digital readout with arm Machine lighting Coolant tank with pump X and Y-axis feed infinitely adjustable Including accessories as shown in the picture

Būklė: naudotas, Gamybos metai: 2004, Technical details: Operating pressure: 9.75 bar Output capacity: 10.1 l Total power requirement: 5.5 kW Volume flow: 10.1 m³/min Operating hours: 26,071 h Motor speed: 3,000 rpm Protection class: CE 0038 Machine weight approx.: 310 kg Dimensions (L x W x H): 1.2 x 0.6 x 1.0 m Bljdpfju Szlujx An Hjn Condensate separator installed. Limitation: Overload valve does not switch off automatically. Sale as is.

Būklė: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Blsdpfxsu Tq U Io An Hon Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Būklė: naudotas, Gamybos metai: 1975, Technical Details: X-axis travel: 300 mm y-axis travel: 350 mm z-axis travel: 350 mm Vertical quill stroke: 60 mm Spindle speeds: 40 - 2000 rpm Feed range: 12.5 - 500 mm/min (18 steps) Tool holder: SK 40 Spindle head adjustment: swivels 90° right/left Spindle head adjustment y-travel: 175 mm Clamping surface table: 600 x 285 mm Distance spindle nose to table: min./max.: 50 / 400 mm Distance spindle center to column: min./max.: 170 / 345 mm Total power requirement: 1.6 kW Machine weight approx.: 0.8 t Machine dimensions approx. LxWxH: 1.4 x 1.1 x 1.7 m Bledpfx Aou T Navsn Hjn Vertical spindle tool holder: SK 40 Quill stroke: 60 mm Spindle speed: 40 - 2000 rpm, 18 steps Horizontal spindle tool holder: SK 40 Spindle speed: 40 - 2000 rpm, 18 steps Equipment: Heidenhain 3-axis digital readout Coolant system

Būklė: naudotas, Gamybos metai: 1987, Technical Details: Spindle diameter: 110 mm X-axis travel: 1,985 mm Y-axis travel (vertical spindle head): 1,270 mm Z-axis travel (table longitudinal): 1,260 mm (with quill stop) / 1,490 mm (with quill stop) Table adjustment: No B-axis (table): 360° W-axis (spindle axial travel): 710 mm U-axis (cross slide radial): 250 mm CNC control: Heidenhain 320 Tool holder: ISO 50 Table size: 1,600 x 1,400 mm Table rotation: 360° Table load capacity: 6.3 t Boring spindle speed: 6.3 ... 1,250 rpm / 4 steps Planing support speeds: 6.3 ... 315 rpm / 2 steps Feed rates: - Table: 5...2,500 mm/min - Vertical spindle head: 5...2,500 mm/min Total power requirement: approx. 90 kW Machine weight: approx. 30 t Quill Stop Cross Slide 700 Electronic handwheel Max. turning diameter when boring: 630 mm Bodpfx Aou Utwbon Hsln Max. turning diameter when planing: 1,250 mm Currently, the boring mill has an electrical fault. Our offer/sale is as described.

Būklė: naudotas, Gamybos metai: 2022, Technical details: Rated power: 28 kVA Drive motor: 24 kW Operating hours: 0 h Blsdpfxsu U E Nvj An Hen Fuel type: Diesel Engine speeds: 1500 - 1800 rpm Engine output: 24 kW Voltage: 400 V Approx. machine weight: 1060 kg Dimensions (L x W x H): 2.0 x 1.0 x 1.3 m The generator is soundproofed. Engine: 4-cylinder; Type Cummins 4B3.9-G2; 1,500 rpm; Output 24 kW; Tank capacity 120 litres; Fuel consumption: 238 g/kWh rated power and 226 g/kWh standby power Cooling system and battery 12 Volt Generator: Type TAL-A40-G; 1,500 - 1,800 rpm; Current 40 Ah; Max. power at standby = 28 kVA and prime power = 25 kVA, Voltage 400 Volt Accessories: Service box – see photo

Būklė: naudotas, Technical details: X travel: 600 mm y travel: 300 mm z travel: 360 mm Bsdpfx Anou U E T Io Heln Speed range: max horiz. 40–2000 rpm Spindle taper: vert. / horiz. SK 40 / SK40 Speed range: max permissible 40–2000 rpm Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. LxWxH: 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis display

Būklė: naudotas, Gamybos metai: 1996, Technical Specifications: X-Axis Travel: 2,500 mm y-Axis Travel: 560 mm z-Axis Travel: 600 mm Control System: TNC 426 CA Drilling Capacity in Steel (diameter): 400 cm³/min Maximum Milling Capacity: 400 cm³/min Tool Magazine: 34 positions Tool Clamping Force: 12 kN Spindle Taper: SK 40 Bsdpfx Asvad Hpjn Heln Spindle Overhang: 580 mm Spindle Speed: 20–7,500 rpm, stepless Spindle Torque: 210 Nm Distance Spindle Nose–Table: 0–600 mm Feed Rate (X/Y/Z): 1–24,000 mm/min, stepless Rapid Traverse (X/Y/Z): 24 m/min, stepless Feed Force: X/Y = 6 kN and Z = 8 kN Table Size: 3,300 x 500 mm Table Load (central/max): 2,500 kp Interface: yes Total Power Requirement: approx. 43 kW Machine Weight approx.: 14.4 t Machine Dimensions approx. (LxWxH): 3.05 x 5.6 x 3.0 m Chip Conveyor Dimensions (LxWxH): 6.6 x 0.6 x 1.3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design With integrated coolant supply system Link-type chip conveyor MAN+HUMMEL with coolant tank and pump Coolant preparation unit by ALLWEILER AG, size L: 1,550 x W: 1,000 x H: 1,200 mm; filter band width 500 mm; pressure 30 bar Hydraulic unit Machining area can be partitioned—divider wall present

Būklė: naudotas, Gamybos metai: 1998, Technical details: x-axis travel: 820 mm y-axis travel: 280 mm z-axis travel: 410 mm Spindle mount ISO: SK 40 Distance table/horizontal spindle: min. 30 / max. 440 mm Cross beam adjustment - horizontal: 650 mm Speed range: 40...2000 / 18 steps rpm Swivel range +/-: at 90°: 360° and at 45°: 360° Clamping surface: 1120 x 250 mm Blodpfeva Ei Ssx An Hen Table swivel approx.: 45° right / left Feed: X/Y: 12.5 - 830 + Z: 5.2 - 260 mm/min Rapid traverse: X/Y: 2500 and Z: 1040 mm/min Total power requirement: 10 kW Machine weight approx.: 2000 kg Machine dimensions approx. LxWxH: 2.2 x 1.8 x 1.7 m Equipment: 2x counter bearing Ø 55mm Cooling system: pump and feed line Operation via 3-way measuring system ACU-Ride and control panel Machine feet

Būklė: naudotas, Gamybos metai: 2001, Technical Details: Grinding length: 2500 mm Grinding width: 800 mm Workpiece height: 800 mm Table movement horizontal: Longitudinal stroke: 2700 mm Table movement horizontal: Cross stroke: 800 mm Table speed: longitudinal: 1 - 35 / cross: 0 - 3 m/min Feed rate: vertical: 0.001 / cross: 0.0025 mm/stroke Magnetic chuck size: 2500 x 800 mm automatic grinding wheel feed: 0.001 mm Distance table to spindle centre: 900 mm Grinding spindle speed: n/a rpm Grinding wheel dimensions: 400 x 76 x 127 mm Total power requirement: 36 kW Blsdpfx Anovbgr Re Hon Machine weight approx.: 13.5 t Machine dimensions approx. LxWxH: 7.5 x 2.8 x 2.7 m Coolant system dimensions LxWxH: 1.8 x 1.0 x 0.92 m Hydraulic unit dimensions: 1900 x 800 x 1500 mm Transport dimensions (machine): L: 8.0 x W: 2.4 x H: 2.85 m The machine is currently located in the technical department! Equipment: - Current grinding wheel mounted: Ø 340 x 81 mm - Hydraulic unit - Dressing device - Separate working area (2-way sliding doors) - Machine interior lighting Accessories: Various grinding wheels Ø 400; Ø 310; Ø 300 and Ø 200 mm Various magnetic inserts and filter cartridges

Būklė: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Approx. machine weight: 17.0 t Total connected load: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: - No. 1: LxWxH: 1000x850x2350 mm - No. 2: LxWxH: 1250x650x2230 mm - No. 3: LxWxH: 650x600x1700 mm - No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations equipped with 15 drilling and milling spindles Suitable, for example, for the production of industrial valves in larger quantities (see photo) Further technical specifications: - Workpiece carrier: workpiece drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Thread cutting unit 1: SK 40 tool holder; quill Ø 125 mm; stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - Thread cutting unit 2: SK 40 tool holder; quill Ø 125 mm; stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor system - Band filter, manufacturer: Filtertechnik Gera (conveyor belt width 430 mm) - Operator panel - Hand-held control transmitter Bljdpfx Aneu Idxfo Hsn This machine is not connected. Sale as is! i. D.

Būklė: naudotas, Gamybos metai: 1978, Technical details: Drilling capacity in steel (diameter): 100 mm Throat depth: 400 - 2100 mm Vertical travel of arm: 100 mm Spindle taper: MK 50 Drilling depth: 415 mm Spindle stroke: 400 mm (scale) Column rotatable: 360° Column diameter: Ø 500 mm Distance head - clamping surface (min./max.): 400 / 1,800 mm Spindle speed range: 12.5 – 1,600 rpm / 15 steps Feed rate: 0.063 – 2.5 mm/rev / 15 steps Table clamping area (L x W): 2,000 x 950 mm Total power requirement: approx. 35 kW Machine weight approx.: w/o cube = 8.0 t Machine dimensions (LxWxH): 3.40 x 1.16 x 3.51 m Additional information: - Horizontal travel of drilling spindle: 1,700 mm Equipment: Bledpsu Id Awjfx An Hjn - incl. drilling cube (horizontal surface: 1,000 x 1,000 x 500 mm, center bore Ø 35 mm; 6 T-slots), (vertical surface: 1,000 x 500 mm, 3 T-slots) - Control panel - Coolant system

Būklė: naudotas, Gamybos metai: 1999, Technical details: Swing diameter over bed: 460 mm Swing diameter over cross slide: 388 mm Turning length: 1016 mm Centre distance: 1016 mm Centre height measured in bed: 230 mm Swing diameter in gap: 640 mm Spindle bore: 52 mm Speed range: 30 - 2000 rpm / 12 steps Feeds: - longitudinal: 0.032 - 0.898 mm/rev - cross: 0.016 - 0.449 mm/rev Tailstock quill taper: MK 4 Tailstock quill stroke: 120 mm Total power requirement: 3.75 kW Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.5 m Bedpfeu Ixzbex An Hjln Equipped with: - Switchable gear transmission - 3-axis digital readout system Quantum - Top slide adjustment +/-90° - Multifix quick-change toolpost - 3-jaw chuck Ø 200 mm - Live centre in tailstock - Thread cutting: imperial threads, metric threads, trapezoidal threads, module threads Accessories: Change gears, machine feet, 1x fixed centre

Būklė: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Bodpeu Ix D Aefx An Heln Turning length: 1100 mm Swing diameter in gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Būklė: naudotas, Technical details: Diameter: 250 mm Machine weight approx.: 31 kg Bedpfx Asu Nk D Ren Heln Speeds: 3504 rpm Three-jaw chuck - incl. 3 sets of jaws each for external and internal clamping - without packaging *

Būklė: naudotas, Gamybos metai: 1984, Technical Details: Drum rotation speed: 16 rpm Speed range: min./max.: 0.23 / 0.34 m/sec. Operating pressure: 85.3 psi – approx. 6 bar Maximum pulling force: 15 kN Minimum pulling force: 10 kN Blodpeu Nv Ubefx An Hon Weight: 389 kg Dimensions (L x W x H): 1.1 x 0.9 x 0.75 m - Pneumatic WINCH - Robust steel construction - Base plate size: 700 x 340 mm - Pressure display via manometer - Compressed air connection with 1" threaded fitting - Drum brake - Rope drum size: Ø 400 x Ø 250 x 230 mm - Supplied without rope

Būklė: naudotas, Gamybos metai: 2002, Technical details: Rated power: 1670 kVA Rated power: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h Bsdpfxju Nzwuj An Hjln This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, as often encountered in industrial applications. Suitable for stabilising, among other things, power supply systems. The UPS unit consists of the Powerbridge (a flywheel with an attached generator) and a Uniblock (electromotor/generator unit). The Uniblock supplies power to the customer modules in the absence of any mains fault. The Powerbridge serves as an energy storage device. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, the supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 sec. A diesel engine is coupled via a freewheel clutch. This means that as soon as the engine reaches the speed of the Uniblock, it accelerates the generator to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged)

Būklė: naudotas, Gamybos metai: 2006, Technical Details: Workpiece weight: 1.1 t Control system: RobAssist via makro-Technik / VME-Bus-CPU Rotary table: Ø 800 mm Rotary table swivel range: 370° Tiltable table: 115° Bjdpfx Anovzq Hro Heln Total power requirement: 35 kVA Total weight approx.: 4000 kg Dimensions L x W x H: Robot: approx. 2.5 x 4.5 x 3.8 m Dimensions control cabinet: approx. 600 x 800 x 2200 mm Dimensions L x W x H: Fume extraction unit: approx. 0.7 x 0.8 x 2.7 m Dimensions L x W x H: Rotary module: approx. 1.4 x 1.4 x 1.1 m The system is currently located in the technical department. Welding robot system comprises: -Gantry with robot: Reis Robotics, RVL20-16, 3 kVA, max. reach approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec, axis 3: 150°/sec, axis 4: 450°/sec, axis 5: 450°/sec, axis 6: 500°/sec -2x columns: Column spacing 3300 mm, columns on baseplates 900x900 mm; column diameter 350 mm -Rotary/tilt table module: Model RIS, type RDK11 Max. torque, tilt axis: 4,200 Nm, and rotary axis: 2,200 Nm Tilt axis speed: 19°/sec, and rotary axis: 45°/sec -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A, protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, max. air flow 300 m³/h, filter class category C, filter surface area 2.2 m² -Cooling unit: Type FK 4000 R, capacity 2 kW, protection class IP 23, pressure 4 bar Equipment: -Safety light curtain with transmitter and receiver -Programming pendant

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Bsdpfx Asv A Sqhen Heln Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed