Stebejimo Kameros pirkti naudotą (2 097)

Būklė: labai geros būklės (naudotas), Vötsch Model: VCS³ 7034-5 Iodpfsziyx Njx Aa Dsba Vötsch Climate Test Chamber, Water-cooled With a temperature change rate of 5 K/min Technical data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Technical data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Relative humidity deviation (temporal) at the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm Side ports: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-supplied fuse: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to delivery: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) If you have any further questions, please do not hesitate to contact us by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles including ramps and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible as applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) Test volume: 990 liters Temperature range: -40 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (per IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Thermal compensation capacity (max): 4500 W Calibration setpoints: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Cable Ports: - The test chamber is equipped with ports on both the right and left sides. - These allow measurement cables and test devices to be routed into the test space. - 1 × L1 DN 50 mm - 1 × R1 DN 125 mm - 3 × R1 DN 50 mm Power connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Ibjdpeziyxpsfx Aa Dja Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important safety information for buyers! The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, documented trial run of the chamber Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Iodpfxeziyxij Aa Doba Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions (W x D x H): 580 x 765 x 750 mm External Dimensions (W x D x H): 870 x 1595 x 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Information for Buyers – Your Safety! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant as needed 3. Leak test with certificate 4. Upon successful inspection, chambers undergo documented test runs. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) For further questions, please feel free to contact us by phone.

Būklė: naudotas, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-Cooled Specifications for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Fluctuation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Rate of Temperature Change: Heating: 0.5 K/min Cooling: 0.2 K/min Specifications for Climatic Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% to 98% rH Temporal Temperature Fluctuation: ± 0.1 to ± 0.3 K Spatial Temperature Deviation: ± 0.5 to ± 1 K (Equivalent to Temperature Gradient): 1 to 2 K Temporal Humidity Fluctuation: ± 1 to ± 3 % Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Ibodpfjziyxcsx Aa Dea Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feed-throughs: - 1 feed-through Ø 50 mm installed on the left side - 1 feed-through Ø 125 mm installed on the right side Power Supply: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Rated Current: 10.0 A Refrigerant: R 404A Capacity: 600 liters Weight: 540 kg For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications and technical details subject to change and error!) We are happy to answer any further questions you may have by phone.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal struts for increased floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Iedpfx Aasziyw Sj Djba Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for your safety as the buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), We are offering a climate test chamber for sale. Water-cooled Test chamber volume: 350 liters Interior dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climatic operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.H. over time up to 90% r.H.; max. ±1 - 3% r.H. over time above 90% r.H. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Isdpfx Aasziyw Es Djba Weight: 650 kg Model: CS-70/350 Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Control Test Chamber Volume: approx. 600 liters Test Chamber Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External Dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating Data: Test Chamber Lighting: LED 24 V, 6.8 W / Halogen Bulb 2 x 24V, 50W Rated Voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Required Fuse: 16 A slow-blow Protection Class (Control Cabinet and Operator Panel): IP 54 Maximum Heat Emission to Ambient: 1200 W Sound Pressure Level: approx. 46 dB(A) (measured at 1 m distance from the front, 1.6 m height) Data for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Deviation (center of usable space): ± 0.1 to ± 0.5 K Ibedpfxeziywrs Aa Dsa Spatial Temperature Deviation: ± 0.5 to ± 1 K Temperature Gradient (per IEC 60068-3-5) Temperature Change Rate: Heating 0.6 K/min, Cooling 0.3 K/min Heat Compensation at +20°C to +50°C: 200 W Data for Climatic Tests: Temperature Range: +10°C to +90°C Dew Point Range: 4 to +89.5°C Humidity Range: 10 to 98 % RH Temporal Temperature Deviation (center of usable space): ± 0.1 to ± 0.3 K Spatial Temperature Deviation: ± 0.5 to ± 1 K Temporal Humidity Deviation: +1 to +3 % RH Refrigerant: R-404A Weight: 610 kg Important Information for Your Safety as a Buyer! The following processes are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated devices. Condition: Used Scope of delivery: (See image) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone with any further questions.

Būklė: labai geros būklės (naudotas), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Temperature change rate: Cooling approx. 3.5 K/min Temperature change rate: Heating approx. 4 K/min Ibjdpfsziyvuex Aa Dja Temperature testing Temperature range: -40°C to +180°C Inspection plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A Important safety information for buyers: The following procedures will be carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature testing: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate cooling: 0.2 K/min Temperature change rate heating: 0.5 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Heat compensation at +20°C: 350 W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Temporal humidity deviation: ± 1 to ± 3% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1.0 K Power supply: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as the buyer for your peace of mind! The following procedures are carried out on our test chambers prior to sale: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Ijdpfeziypusx Aa Doba Scope of delivery: (see photo) (Technical data and specifications subject to change and errors!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Ibjdpoziypnofx Aa Dja Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Cabinet We offer you a CTS temperature test cabinet. Water-cooled CTS Temperature Test Cabinet Technical specifications: Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability over time: ≤± 0.3 K Dimensions: Test volume: 600 liters Internal chamber dimensions: height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: height approx. 1900 mm, width approx. 1120 mm, depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Type: T-70/600 Important safety information for buyers! The following procedures are carried out on all chambers we offer before sale: 1. Functional check and replacement of any necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate Ibjdjziygyjpfx Aa Dea 4. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Feutron Temperature Test Chamber We offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions Chamber external dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature Range -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant Isdpfx Ajziyggea Dsba 3. After successful inspection, the chambers undergo a trial run, monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Nominal Voltage: 400V 3/N PE 50 Hz Nominal Power: 6.7 kW Nominal Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display of setpoint and actual temperature values - Easy adjustment using +/- button - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-supplied test specimen sensors Shelving: Stainless steel, support surface 820 x 710 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate: measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Maximum heat radiation: 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without radiation, and without additional equipment. Ijdpfx Ajziycbsa Deba Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Nominal power: 6.7 kW Nominal current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Important security information for buyers! The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), We are offering a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touchpanel" All control and operation commands can be triggered simply by touching the function symbols on the "Touchpanel" control unit. Adjustable Feet To compensate for floor unevenness and ensure sufficient ventilation of the machine components, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring lines and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm (Refrigerant converted to R-452A) Ibjdpfx Aaoziyb Rs Dsa Test Chamber Volume: approx. 600 liters External Dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max.: 2500 W Operating Data: Internal lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors excepted!) Feel free to contact us by phone for any further questions.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, 386 NAUDOTAS Koma CDS šaldymo-rauginimo kamera, šaldiklis. IŠORINIAI MATMENYS (cm): Isdsy Thc Tepfx Aa Doba - aukštis: 258, - plotis: 265, - ilgis: 420. VIDINIAI MATMENYS (cm): - aukštis: 200, - plotis: 200, - ilgis: 355. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS. Mūsų sandėliuose turime daug kepyklų krosnių: aukštinių, rotacinių, dujinių, alyvinių, elektrinių krosnių iš įvairių gamintojų. Taip pat siūlome įrangą, kepyklines mašinas, bandelių gamybos linijas, duonos linijas. Norėdami pamatyti visą mūsų aktualų pasiūlymą, apsilankykite mūsų Bakeres profilyje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, 385 NAUDOTA Lilnord šaldymo–brandinimo kamera, brandinimo kamera. PASTABA: Įrenginys be valdymo pulto. IŠORINIAI MATMENYS (cm): - aukštis: 249, - ilgis: 350, - plotis: 197. VIDINIAI MATMENYS (cm): Ibsdpfjy Tg Smsx Aa Dja - aukštis: 198, - ilgis: 225, - plotis: 160. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS. Mūsų sandėliuose turime daug kepimo krosnių: lentyninių, rotacinių, dujinių, alyvos, elektrinių, įvairių gamintojų. Taip pat siūlome kepyklos mašinas, įrangą, bandelių ir duonos gamybos linijas. Norėdami pamatyti visą mūsų esamą pasiūlą, apsilankykite mūsų Bakeres profilyje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, 384 NAUDOTA šaldymo brandinimo kamera, šaldiklis Koma CDS. TECHNINIAI DUOMENYS: - darbo temperatūros diapazonas: nuo -10°C iki +30°C. Ibjdpoy Tg Rvjfx Aa Doa IŠORINIAI MATMENYS (cm): - aukštis: 258, - plotis: 265, - ilgis: 420. VIDINIAI MATMENYS (cm): - aukštis: 200, - plotis: 200, - ilgis: 356. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS. Turime labai daug kepimo krosnių: lentyninių, rotacinių, dujinių, alyvinių, elektrinių, įvairių gamintojų. Taip pat siūlome kepyklų mašinas, įrangą, bandelių linijas ir duonos linijas. Norėdami pamatyti mūsų visą atnaujintą pasiūlą, apsilankykite mūsų Bakeres profilyje.

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Memmert ICH 260 kamera iš 2021 metų, kaip nauja. Įrenginys po parodų ekspozicijos. Vienerių metų garantija atsarginėms dalims. Gamintojo aprašymas: Darbinės temperatūros diapazonas be drėgmės: 0 iki +60 °C Temperatūros nustatymo diapazonas 0 iki +60 °C Darbinės temperatūros diapazonas Iodpfx Aszam Hvja Dsba nuo +10°C iki +60°C esant drėgmei ir/ar šviesai Temperatūros nustatymo tikslumas 0,1 °C Temperatūros jutiklis 2 Pt100 jutikliai pagal DIN A klasę, keturių laidų grandinėje, tarpusavio stebėsenai, perima funkcijas gedimo atveju Drėgmė Drėkinimas atliekamas panaudojant distiliuotą vandenį iš išorinio rezervuaro savaime įsiurbiančios siurblio pagalba Drėkinimas garų generatoriumi Drėgmė aktyvus oro drėkinimas ir džiovinimas reguliuojamas 10–80 % santykinės drėgmės ribose, su skaitmeniniu drėgmės indikatoriumi – indikatoriaus skiriamoji geba 0,1 %, nustatymo tikslumas 0,5 %

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Memmert ICH 260L Chamber from 2021. The device is offered with a one-year spare parts warranty. Manufacturer’s description Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors, DIN Class A, 4-wire circuit, mutually monitoring and takeover functionality in case of fault Humidity Humidity humidification using distilled water from an external reservoir, fed by a self-priming pump Humidification generated by a steam generator Iedjzam Hispfx Aa Djba Humidity active humidification and dehumidification, adjustable within a 10–80% relative humidity range with digital RH display – display resolution 0.1%, setting accuracy 0.5% Light Light Daylight and ultraviolet light can be programmed individually via the controller Light cold white light +/- 6%, for UV light +/- 10% Light Lighting unit consisting of 4 cold white fluorescent tubes (standard D65 illumination, 6500 K) and 2 UV lamps in the spectral range of 320–400 nm

Gamybos metai: 2024, būklė: beveik kaip naujas (naudotas), Memmert HPP 1060 eco Chamber, year 2024. Ex-demo unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Ibsdpszam E Sjfx Aa Dja Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors DIN Class A in four-wire circuit for mutual monitoring, with error fallback capability Humidity Humidity setting range 10 – 90% relative humidity Humidity humidification provided by distilled water from an external tank via a self-priming pump Humidification humidification using a steam generator Dehumidification dehumidification via Peltier technology refrigeration dryer Humidity setting accuracy 0.5% relative humidity

Būklė: labai geros būklės (naudotas), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-cooled The Weiss Climate Chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as conditioning of samples and materials within a range of −70 °C to +180 °C. Simcon/32 - Net control system Technical Data: Chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm Ibedpfx Ajzimg Hja Doa External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 800 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Specifications for temperature tests: Temperature range: -70 °C to 180°C Temperature deviation over time at chamber center: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: at +20 °C: 5000 W at -20 °C: 5000 W Specifications for climate tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temperature deviation over time at chamber center: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time at chamber center: ± 1 to ± 3% r.h. Heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16.5 kW Nominal current: 29 A Required fuse: 32 A slow-blow Permissible test specimen weight: Total load on shelf supports: 80 kg Chamber floor: 80 kg, Shelf insert: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, the following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of the water protection classes of enclosures or components. With optional equipment, testing according to IPX9K (high-pressure/steam-jet), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests Isdpezil T Sofx Aa Djba The SWT system can cover a wide range of tests (depending on configuration): Basic configuration: IPX3 / IPX4 tests (spraying or all-direction splash water). Optional: Higher protection classes up to IPX5 / IPX6 (water jets), and — with suitable high-pressure equipment — up to IPX9 or IPX9K. Tests are conducted according to standards such as DIN EN 60529 (for IP protection classes) and ISO 20653 (e.g. for vehicle or outdoor applications), depending on requirements and field of application. Typical areas of application Typical application scenarios for such a test chamber include: Electronic devices or enclosures intended for outdoor use or humid environments, e.g. outdoor lighting, control enclosures, power units, panels. Components for vehicles or machinery, especially when exposed to rain, splash water, or high-pressure cleaning (e.g. construction machinery, e-bike or vehicle parts). Batteries or electrical components that must be tested for water resistance – e.g. in the automotive industry or for e-mobility. Technical Data: Suitable protection classes: IPX3 / IPX4 Oscillating pipe radius (for IPX3/4 tests): 200 mm as standard (for SWT 1000), optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W×H×D) Operation / control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Būklė: naudotas, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use incl. PC, Software & Technical Documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Specifications – Scienlab SL1001A: Feature / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, and cycling of battery modules Condition: Very well-maintained, lab use Technical Specifications – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Feature / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year: 2019 Weight: approx. 1,225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% rH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring/Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software PC + Software + Documentation Industrial PC with control and measurement software Enables automated test sequences, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total System approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifecycle evaluation of battery modules (e.g., Li-Ion, LFP, NMC) - Rapid charging and cycle tests - Environmental simulation of temperature and humidity - Research, industrial, and university laboratories Important Note: "The bench shown in the photos is not included in the sale." Scope of Delivery - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Ibedpfxozil Txe Aa Dsa For further questions, we will be happy to assist you by phone.

Būklė: naudotas, Liebisch KEA 300 Constanzo Fully functional condensate testing device for material and coating tests Description: The unit is designed for conducting condensation water or water vapor tests according to common standards (e.g., DIN EN ISO 6270). Ideally suited for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The construction is robust and low-maintenance, making it excellent for research, laboratory, and quality testing applications. Technical data: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Rated power: 1,400 W Chamber size: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Control: none / manual operation Ibodpfx Aaozii Aqo Dea Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss UV200SB Weathering Chamber / UV Ageing Test Device Air-cooled, approx. 200 litres Ibodpfx Aajziiz Hs Doa For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weather effects. This chamber is used for accelerated ageing tests on plastics, paints, coatings and other materials in accordance with standard norms (e.g. DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp Type: Fluorescent UV lamps Temperature Range (UV Phase): approx. +20 to +80 °C Climate Cycling: Alternating UV exposure, condensation and spray phases Humidity Range: approx. 10% – 95% rH (relative humidity) at temperatures above approx. +10 °C Temperature Change Rate: approx. 3 K/min Test Chamber Dimensions: Height 750 mm, Width 650 mm, Depth 400 mm External Dimensions: Height 1800 mm, Width 920 mm, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated Power: 9.0 kW Rated Current: 15.0 A Refrigerant: R 404A For your security as a buyer, please note the following: The following actions are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Specifications and details are subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.