Temperatūros bandymo kamera

Heraeus Vötsch VTS 7033

Būklė: naudotas, Technical Details: Lredsvc Awxjpfx Ahcst Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), We have spare parts available for CNC lathe VDF Boehringer CM180. Available parts: - Turret head: €1,500 - Tailstock: €1,000 - Main spindle headstock: €3,000 - Ball screw, X and Z axis: €1,000 - Axis motors, X and Z: €3,000 - Main spindle motor: €3,250 - Hydraulic system: €1,200 - 250mm chuck with clamping system: €1,800 Lrjdsgqurbepfx Ahcjt

Būklė: naujas, Stroke length (max.): max. 400 mm Table height: Floor to top edge of table 850 mm Installation height: 600 mm Speeds: Advance 120 mm, Pressing 13 – 4 mm, Return 170 mm/sec Pump capacity: 65 L/min (REXROTH – axial piston pump) Motor: 15 kW – 1500 rpm Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1,500 kN (150 tons at 245 BAR) Operation Mode: Selection via key switch - Manual / setup mode via two-hand control without light sensor safety on the front (rear side always active) - Automatic mode via two-hand operation at full speed (with active light sensor safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 rpm (IE-3) Pump: 45 cc, 65 L/min, REXROTH – axial piston pump Speed: Advance 120 mm – Pressing 13–4 mm – Return 170 mm/sec Clear width: 1300 mm Table plate: 1200 x 800 x 90 mm, with T-slots Ram plate: 1200 x 800 x 600 mm, with T-slots & reinforcement ribs Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to top edge of table) ----- Lrsdpfsmpfwdsx Ahcot Hydraulics: (Hydraulic accessories located on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety device Mechanical ram safety at upper dead center Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control system: Main control cabinet (mounted lateral to the press frame) Swiveling operator panel SIEMENS S7 – 1200 KTP 9” SIEMENS touchscreen (language selection DE / ENG) Safety PLC (SICK) Light curtain for front & rear of work area (SICK 750 + 150 mm.) Soft starter Movable two-hand operation SECOMEA Ethernet connection Linear measuring system for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT) Work Area Lighting (2x IP-66) - 8 free PLC I/O ports for external connections ----- - Safety guard around hydraulics - Side access ladder ----- Documentation: Operating manual GERMAN (1 copy paper & 1 copy USB) Hydraulic & electrical diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2,400 x 2,100 x 4,100 mm Total weight: approx. 11,000 kg Painting: Frame RAL 7035 light grey

Būklė: geras (naudotas), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold CPV14 Lodjhzzb Hspfx Ahcsrt -Type: CPV14-GE-DI01-8 CPV14-VI -Valves: Festo 161 362 S802 and 161 360 S602 -Individual components: see photos -Dimensions: 180/180/H100 mm -Weight: 2.7 kg

Gamybos metai: 2021, veikimo valandos: 4 748 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Lrsdpfx Ahey Dd Nqscst Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power consumption: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important information for your security as a buyer: The following points are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications are subject to change and error!) For further questions, please don’t hesitate to contact us by phone.

Gamybos metai: 2021, veikimo valandos: 5 128 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of construction 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior Lodpfxoy Dclws Ahcsrt - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important safety information for buyers: The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data!) If you have any further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Model: VTS 7018-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4500 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm Ledsyu Rhgopfx Ahcort External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Fuse, provided by customer: 32 A slow-blow Sound pressure level at 1 m (free-field measurement): < 63 dB (A) Lateral feedthrough: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight approx. 460 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and information!) If you have any further questions, we will gladly answer them by phone.

Būklė: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Rate of temperature change (cooling): 7.5 K/min Rate of temperature change (heating): 7.5 K/min Lredpfxezdtdhj Ahcjt Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fusing, to be provided on-site: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.