Slifuoklis pirkti naudotą (719)

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - In very good condition - German production - Year of manufacture: 1996 - Segmental pad – ideal solution for lacquer / veneer TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1-150 mm - Combination unit with membrane sanding pad, task-controlled - Main unit motor power: 11 kW - Air blow on sanding belt - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Felt roller unit - Motor power: 0.75 kW - Roller oscillation - Cleaning brush unit - Motor power: 0.75 kW - Continuously adjustable feed - Feed speed range: 4-18 m/min - Feed drive motor power: 1.5 kW - Electric height adjustment Fgedsgi Dryspfx Acujh - Vacuum table - Fan motor power: 3 kW - Extraction ports diameter: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2500 kg 1. Alpha Combi Unit is a sanding unit with a 150 mm diameter contact roller, 90 shore hardness. Integrated with a sectional pneumatic pad, section width: 27 mm. 2. EMS 27 Optical System – detects minimal irregularities and adjusts the pressure of each pad section to the corresponding area of the workpiece. 3. Control of respective adjacent pad sections is possible within the range -2 to +4.

Sąlyga: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 6 600 mm, bendras plotis: 1 000 mm, bendras aukštis: 2 500 mm, įėjimo įtampa: 380 V, I. APLINKINIS ŠLIFAVIMO STAKLĖS SINGIP MODELIS SZM 8 Įmonės SINGIP (Kinija) aplinkinio šlifavimo staklės, modelis SZM 8 (6 apvado diskų), pagamintos 2021 m. lapkritį – skirtos įvairių dydžių bei storių plokščio stiklo kraštų šlifavimui. Fjdpew T Rphofx Acusgh Pirmosios trys deimantinės šlifavimo diskai naudojamos grubiam ir tiksliam šlifavimui, likusios trys – stiklo poliravimui. Atsižvelgiant į pasirinktą diskų komplektą bei stiklo storį, galima gauti norimą šlifavimo formą (KANTAS arba Pieštukas). Staklės labai gero stovio, idealiai tinka greitam vienodo storio stiklo apdirbimui, išmontuotos. Modelis: SZM 8 Minimalūs apdirbamo ruošinio matmenys: 100 x 100 mm Stiklo storis: 3–12 mm Apdirbimo greitis: 0,5–2,5 m/min Matmenys (ilgis x plotis x aukštis): 6600 x 1000 x 2500 mm Įmontuota galia: 16 kW Energijos tiekimas: 380V, 50Hz

Sąlyga: geras (naudotas), 8-position tool turret, manually indexable, for retrofitting Fgedpfxowg Rv Ns Acush 8 x turning tool holders 8 x boring tool holders Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, veikimo valandos: 1 534 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, FOR SALE: CNC GLASS MACHINE IN VERY GOOD CONDITION, LITTLE USED, TRANSPORT POSSIBLE, ONLY 1453 HOURS OF OPERATION Fgjdpjwb A D Isfx Acueh

Sąlyga: naujas, Belt width: 75 mm Belt length: 2000 mm Belt speed: 30 - 34 m/sec Total power requirement: 3.0 kW Machine weight: approx. 75 kg Space requirement: approx. 1.2 x 0.5 x 0.85 m Showroom machine at a special price!!! Industrial belt grinding machine - with motor brake - incl. 10 pcs. K80 sanding belts Fjdjv Sd Abjpfx Acujgh

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, naudotas Gamintojas: Bütfering Tipas: AWS-1100 Staklės puikios būklės – konvejerio juosta labai gera – Pagaminimo metai: 1991 Staklių Nr. 2127547 Darbinis plotis – apie 1100 mm Prašvietimo aukštis – apie 160 mm Agregatų skaičius: 1 vnt. Fsdpfxjv Tfyks Acuogh Juostos matmenys: 1900 mm x 1120 mm Ištraukimo prijungimas Reikalinga vieta – apie 1700 mm x 2100 mm x 2100 mm Svoris – apie 2200 kg Sandėliavimo vieta: bus sandėlyje 54634 Bitburg, laisvai pakraunama, ne supakuota Perdavimas tokios būklės kaip apžiūrėta, be garantijos ir atsakomybės Prieinama nuo 2025 m. balandžio pabaigos

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table Fgodpfx Aogr Er Sscueh 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: geras (naudotas), For sale: central aligning grinder, in very good condition. Fgjdevbwvmspfx Acueh

Sąlyga: labai geros būklės (naudotas), Briaunų šlifavimo staklės Volpato LBK 160S Fgjdow Ng A Aspfx Acujh Šlifavimo aukštis: 150 mm Mechaninė oscilicija Dvi juostos greičiai Papildomas profilinio šlifavimo agregatas 6-ių volų padavimas (galima parduoti be padavimo) Bendra galia: 4,5 kW

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 5 500 kg, suslėgto oro jungtis: 6 juosta, stalo ilgis: 1 600 mm, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, ruošinio plotis (maks.): 4 000 mm, ruošinio ilgis (maks.): 1 500 mm, Used TIMESAVERS Model 42-Series-1600-WWB – LIKE NEW – For grinding and satin finishing of surfaces on stainless steel sheets Wide belt sander with two top-mounted sanding units and one brushing unit Dry-working machine with Wandres industrial cleaning brush The roller table shown in the gallery image is NOT included with the machine listed above! Technical Data: Year of manufacture: 2021 Workpiece dimensions, min: 750 mm x 1000 mm x 2 mm Workpiece dimensions, max: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2–100 mm Fgjdpfx Aceq Tp H Hjueh Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4–20 m/min Electrical Specifications: Main motor 1st unit, frequency-controlled: 22 kW Main motor 2nd unit, frequency-controlled: 22 kW Main motor 3rd unit, frequency-controlled: 15 kW Feed motor: 3 kW Electrical connections: 400 V Frequency: 50 Hz Compressed Air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Air consumption Wandres: 235 l/min Dust extraction per unit: Required airflow at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg On request, dust extraction and/or installation can also be offered. The roller table shown in the gallery image is NOT included with the machine listed above!

Sąlyga: naujas, Bandwidth: 75 mm Fedpfxeirwwle Acuogh Belt length: 2000 mm Belt speed: 30 - 34 m/sec Total power requirement: 4.1 HP Machine weight: approx. 75 kg Space requirement: approx. 1.2 x 0.5 x 0.85 m Industrial floor belt sanding machine with the following advantages: - Danish top quality - Separate emergency stop - Motor brake - Operational safety - Simple and practical operation - Easy adjustment - Quick and tool-free sanding belt change - 5-year warranty on the motor - Optimum safety

Gamybos metai: 1999, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 942, - Manufacturer: Fladder - Model: Gyro 300 VAC Ex - Working width: 1300 mm - Year of manufacture: 1999 - Number of brush heads: 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans - Motor power: 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet 1 (machine): 10 kW - Electrical connection control cabinet 2 (vacuum fan): 15 kW - Feed speed steplessly adjustable: 2 - 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, D: 400 mm, H: 1700 mm - Location: in stock Fgsdevwa Drspfx Acujh - Voltage, Hz: 400 / 50

Sąlyga: labai geros būklės (naudotas), MAWEG SATURN DUO sander – after technical inspection – very good condition – belt length 1800 mm TECHNICAL PARAMETERS: working width: 200 mm working height: 145 mm 2 x sanding unit with platen 1 upper brush 1 lower brush platen electric height adjustment feed speed: from 4 – 16 m/min feed speed controlled by gear motor pneumatic oscillation air blast on the belt main motors: 2 x 4 kW feed motor: 0.55 kW Fgodpsf N Nflofx Acujh duct diameter: 4 x 80 mm dimensions (L/W/H): 190 x 110 x 210 cm weight: approx. 1300 kg

Sąlyga: geras (naudotas), For sale: FLEX H1212Z straight grinder, fully functional and in very good condition. Fgodjuhm Imepfx Acujh

Sąlyga: naujas, Belt width: 75 mm Fgjdpfx Acsupxg Ejueh Belt length: 2000 mm Belt speed: 30 m/sec Total power requirement: 3 kW Machine weight approx.: 70 t Space requirement approx.: 1.2 x 0.5 x 0.75 m Belt grinding machine with: - Contact wheel: 600 x 75 mm

Gamybos metai: 1999, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 942, - Manufacturer: Fladder - Model: Gyro 300 VAC Ex - Working width: 1300 mm - Year of manufacture: 1999 - Number of brush heads: 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans - Motor power: 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet 1 (machine): 10 kW - Electrical connection control cabinet 2 (vacuum fan): 15 kW - Feed speed steplessly adjustable: 2 - 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, D: 400 mm, H: 1700 mm Fgsdpfjvvl H Nox Acueh - Location: in stock - Voltage, Hz: 400 / 50

Sąlyga: naudotas, Wide-Belt Sander SBF SATEFANI 2W126 - Machine in stock - Refurbished - Very good condition Fgsdpfx Acjcvwf Tjujh TECHNICAL DATA: - Maximum sanding width: 1100 mm - Maximum workpiece height: 160 mm - Minimum sanding thickness: 3 mm - Main motors: 2 x 11 kW - Feed motor: 2.2 kW - Height adjustment motor: 0.37 kW - 1 rubber roller, 65 Shore hardness, diameter 270 mm - 2 rubber rollers, 45 Shore hardness, diameter 400 mm - Two feed speed settings - Pneumatic oscillation with limit switches - Dust extraction ports: 2 x 150 mm diameter - Sanding belt in very good condition Machine dimensions: - Length: 280 cm - Width: 180 cm - Height: 250 cm - Weight: approx. 3000 kg

Sąlyga: naujas, Belt width 100 mm Fgedpfx Ajupxm Escuoh Belt length 1220 mm Belt speed 1140 m/min Max. packing size 0.62 x 0.4 x 0.35 m Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions (L x W x H) 0.97 x 0.67 x 0.37 m This machine can also be installed without the stand. Therefore, it is suitable as a bench belt sander. Stand is included in the scope of delivery. Connection voltage 230 Volt.

Sąlyga: naujas, Belt width: 150 mm Belt length: 2,000 mm Belt speed: 30 - 34 m/sec Total power requirement: 4 kW Fodpfxjirwwpe Acuogh Machine weight: approx. 100 kg Space required: approx. 1.2 x 0.5 x 0.85 m

Sąlyga: naujas,

Sąlyga: naujas,

Sąlyga: naujas,

Sąlyga: naujas, Belt width: 100 mm Belt length: 2,000 mm Belt speed: 15/30 m/sec Tube diameter: 20 - 76 mm Angle adjustable from - to: 30 - 90 degrees Connection voltage: 400 V Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 0.19 t Required space: approx. 1.2 x 0.75 x 0.7 m Fedpsupw Riefx Acuogh Belt grinding machine with: - Grinding belt, grit K 40 - Including 7 grinding rollers: 20, 28, 32, 41, 48, 60, and 76 mm

Sąlyga: naujas, Belt width: 150 mm Belt length: 2000 mm Belt speed: 33 m/sec Total power requirement: 4 kW Machine weight approx.: 100 kg Fsdoupxl Ijpfx Acuogh Space requirement approx.: 1.2 x 0.5 x 0.85 m Belt grinding machine with - Contact wheel: 600 x 150 mm

Sąlyga: naujas, Belt width: 75 mm Belt length: 2000 mm Belt speed: 37 m/sec Total power requirement: 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Fgodpfx Asvblhkjcujh Belt grinding machine with: - Contact wheel: 200 x 75 mm - Continuous flat grinding table, width 75 mm.