Stalinė šlifuoklė - poliruoklė

CORMAK SP150

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Rodewrm Dtspfx Ahmocf Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Būklė: naujas, Dimensions (L x W x H): 675 x 510 x 880 mm Weight: 56 kg Number of drawers: 5 Rcodpeu Iml Iofx Ahmjf Professional tool trolley for workshop equipment. Internal dimensions of the top 4 drawers: 56 x 43 x 10 cm. Internal dimensions of the bottom drawer: 56 x 43 x 17 cm. Wheel dimensions: 100 x 30 mm.

Būklė: naudotas, Drilling capacity: 23.0 / 28.0 mm Max. drilling depth: 140 mm Throat: 300 mm Column diameter: 125 mm Table size: 415 x 385 mm Speed: 100 - 2000 rpm Spindle taper: MT 2 Voltage: 380 V Motor power: 0.9 / 1.4 kW Machine weight approx. 225 kg Dimensions (LxWxH): 900 x 600 x 1960 mm Well-maintained condition (!!) Features: Rcodpfx Aoxabbyjhmof - V-belt driven column drill - Spindle with forward/reverse rotation - Pole-changing drive motor - Manual spindle feed via cross-handle - Work table with 2x T-slots - Table height adjustment via hand crank - Machined base plate with 3x T-slots - Manual V-belt tensioning (front handwheel) - Power cable incl. 16A plug * Machine link: ?machineno=1008-9103760

Būklė: naujas, Drilling capacity in steel (diameter): 32 mm Throat depth: 300 mm Quill stroke: 160 mm Morse taper: MT 4 Table: 460 x 460 mm Speed range: 75 - 3200 rpm Motor power: 1.5 kW Column diameter: 125 mm Rjdpfx Aekahu Rshmjcf Thread cutting: M16 ST60 Feed rate: 0.10 / 0.18 / 0.26 mm/rev Dimensions: 800 x 500 x 2200 mm Weight: 350 kg Equipment/features: - Automatic drilling feeds (magnetic clutch) - Height-adjustable and angle-adjustable table - Movable worktable - Integrated coolant system - Powerful motor - 3-hand lever for feed control - Safety guard with limit switch - Separate emergency stop - Built-in work light - Includes 16 mm drill chuck - B16 - Integrated automatic thread cutting system.

Būklė: geras (naudotas), Gamybos metai: 1974, mašinos/transporto priemonės numeris: 571, Pasiūlymas 25456 Techniniai duomenys: Rcjdpfx Ahsyfn Npsmof - Gręžimo našumas: 28 mm - Gręžimo veleno tvirtinimas: MK 3 - 8 gręžimo veleno sūkių: 100 – 1120 aps./min. - Stalo plotas: 400 x 400 mm - Gręžimo agregatas reguliuojamas aukštyje rankine svirtele - Mažiausias / didžiausias atstumas nuo stalo iki gręžimo-frezavimo veleno: 300 / 600 mm - Gręžimo veleno eiga: 120 mm - Gręžimo veleno išsikišimas: 260 mm - Aušinimo skysčio sistema - Mašinos spintelė su durimis - Variklis: 400 V / 1,5 / 2,3 kW - Reikalinga vieta: apie P 500 x A 1800 x G 950 mm - Svoris: apie 200 kg

Būklė: paruoštas naudoti (naudotas), HSS drills, milling cutters, taps, and saw blades. Condition: Used and unused mix, no scrap. Rjdpjvb Udnjfx Ahmscf Total quantity approx. 648 pieces, weight 184 kg.

Būklė: naujas, Gamybos metai: 2026, CORMAK SP250 Polishing Machine – Industrial Disc Polisher for Deburring and Surface Finishing The CORMAK SP250 satin finishing machine is a highly efficient disc polisher designed for professional surface finishing, deburring, satin finishing, and high-gloss polishing. It is the ideal solution for manufacturing plants, metalworking shops, tool workshops, and metal processing facilities where durability, precision, and reliability are essential. The machine’s robust construction is based on a modern cast housing manufactured to current industrial standards and a rotor equipped with NSK-brand bearings, ensuring exceptionally quiet and smooth operation. Thanks to the tapered spindle thread, a wide range of polishing discs—from soft to hard—can be fitted quickly and securely, depending on the processing requirements. This industrial polisher features a 0.9 kW motor that provides a high power reserve and reliable performance even under demanding production conditions. Its technical solutions make the SP250 an extremely versatile tool—suitable both as a satin finishing machine for dulling and satinizing surfaces, and as a polisher for achieving high-gloss finishes. If you are looking for a sturdy, versatile device, CORMAK satin finishing machines are the choice that will meet even the highest expectations of demanding professionals. Key features of the machine: - Industrial-grade disc polisher - Satin finishing machine for dulling, deburring, and surface finishing - NSK bearings – reliability, quiet operation, and long service life - High-quality cast body – durability and structural rigidity - Powerful 0.9 kW motor – performance for professionals Rodpfeyb Hu Aox Ahmscf Technical Specifications of the SP250 Satin Finishing Machine: - Polishing disc diameter: 250 mm - Polishing disc thickness: 26 mm - Polishing disc bore: 16 mm - Maximum rotational speed: 2850 rpm - Motor power: 0.9 kW - Voltage: 400 V - Dimensions: 570 x 300 x 380 mm - Weight: 22.2 kg