Slifuoklis pirkti naudotą (719)

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) Fsdpfx Acermucxouogh - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Pilnai atnaujinta automatinė plataus juostos šlifavimo staklė, tinkama masyvinės medienos kalibravimui ir šlifavimui. CB 1030 priklauso aukštesnei automatinių plataus juostos šlifavimo staklių klasei, kuri išsiskiria itin tvirtu ir standžiu rėmu bei puikia šlifavimo kokybe. 2 agregatai: velenas + velenas ir padas su bendru 11 kW varikliu: 1. Kalibravimo velenas su kietos gumos danga 2. Mechaniškai reguliuojamas šlifavimo padas Šlifavimo plotis 1030 mm 2 padavimo juostos greičiai Varikliu valdoma storio reguliacija + tiksli rankinė korekcija LCD darbo storio rodymas Ampermetras variklio apkrovos kontrolei Automatinis ruošinio storio matavimas Darbo stalas pakeliamas keturiais varžtais Fodpfsxgq Najx Acusgh Pneumatinė osciliacija 6 bar, valdoma elektroniniu būdu Įėjimo ir išėjimo stalų prailginimai Reikalingas siurbimas apie 3500 m3/val Staklės pilnai atnaujintos, sureguliuotos ir patikrintos.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, bendras svoris: 4 000 kg, darbinio aukščio: 1 000 mm, aukščio reguliavimo tipas: elektrinis, transporto aukštis: 1 000 mm, Kalibravimo staklės / Plataus juostos šlifavimo staklės Gamintojas: Costa Modelis: 71 CCT 1350 Darbinis plotis: 1300 mm Komplektacija: 1x kalibravimo volas (kietoji guma apie 80 Shore), 22 kW, šlifavimo juostos matmenys 1380 x 2620 mm 1x kalibravimo volas - naujai gumuotas (kietoji guma 60 Shore), 18,5 kW, šlifavimo juostos matmenys 1380 x 2620 mm 1x šlifavimo batas, 15 kW 1x dulkių šepetys 1x apšvitimo įrenginys Reguliuojamas padavimo greitis, 4 - 24 m/min. Transporto juosta su vakuumu Vakuuminis ventiliatorius su garso slopintuvu Darbinis aukštis: 1000 mm Aukščio reguliavimas per viršutinę staklių dalį (paprastas integravimas į esamą liniją) Jungtis: 380 V 50 Hz, 200 A Fedoxl N Thepfx Acuegh Bendra galia: apie 65 kW Matmenys: apie 3000 x 2500 x 2400 mm (I x P x A) Svoris: apie 4000 kg

Sąlyga: geras (naudotas), Plačiajuostė juostinė šlifavimo staklės Vertongen S320 - Šlifavimo plotis: 30 cm - Rankinis stalviršio pakėlimas - Didžiausias šlifavimo aukštis: 20 cm Fgodpsxc Exbsfx Acush - Kombinuotas agregatas - 2 padavimo greičiai - Pagrindinis variklis: 5,5 kW - Mechaninė osciliacija.

Sąlyga: naujas, Bandwidth: 100 mm Belt length: 2000 mm Belt speed: 15/30 m/s Total power requirement: 3.0 kW Fedpfx Ast Hyqgocuogh Machine weight: approx. 159 kg Space requirement: approx. 768 x 1185 x 1417 mm Combined tube, profile, and belt grinding machine The unique and universal free-standing belt grinder PASOVEC 100 Multifunction is an indispensable assistant wherever constructions from tubes and other profiles are made. The PASOVEC 100 Multifunction features three workstations. A standard contact grinding station is located at the rear of the machine. On the upper part, there is a station for surface grinding, and finally, an integrated clamping device for tube profiles is situated at the front. This setup allows for precise and clean processing of square tubes, round tubes, and flat steel. Adjustable grinding angles from 30°–90° and 0°–60°. The machine is factory-equipped with an integrated connection for dust extraction. Technical specifications: - Adjustable grinding angles: 30°–90° (0°–60°) - Number of speeds: 2-speed - Extraction port nominal diameter (external): 74 mm - Extraction port nominal diameter (internal): 70 mm Included in the price: 1 pc. table belt grinder PASOVEC 100 MULTIFUNCTION 1 pc. grinding belt 100 x 2000 mm grit 36 1 pc. grinding roller Ø 42.4 mm

Sąlyga: labai geros būklės (naudotas), Plačiajuostė šlifavimo staklės SCM Sandya 5S Darbinis plotis: 1350 mm Fgsdpfx Acjxal Auouoh Darbinis aukštis: 3-160 mm Agregatų skaičius: 2 Kalibracinis agregatas Kombinuotas agregatas Kombinuotas agregatas su popieriaus nupūtimo sistema Pagrindinis variklis: 15 kW Optinė osciliacija Padavimo greitis reguliuojamas variatoriumi: 3–17 m/min Techninė dokumentacija

Sąlyga: labai geros būklės (naudotas), Pusiau automatinė šlifuoklė Buehler Metaserv 250 dual, labai geros būklės. Fedpevx Ucxefx Acuegh

Sąlyga: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 18 700 mm, bendras plotis: 14 600 mm, bendras ilgis: 35 350 mm, šlifavimo ilgis: 320 mm, šlifavimo disko skersmuo: 200 mm, Roll and Internal Grinding Machine. Manufacturer: STANKO (USSR) - Year 1989. Grinding diameter of bore: 50 - 300 mm. Max. diameter of workpiece: 560 mm. Distance between table and spindle: 340 mm. Maximum length of workpiece: 320 mm. Upper diameter of internal grinding head: 125; 100; 80 mm. Fgjdpfx Acjtzwzxsueh Distance from face of front center to spindle flange: 150 - 400 mm. Grinding wheel size: 200 x 75 x 63 mm. Spindle speed range of workpiece: 60 - 600 rpm. Table travel: 800 mm. Main motor power: 7.5 kW. Total required power: 14.63 kW. Machine dimensions (L x W x H): 3535 x 1460 x 1870 mm. Machine weight: 6400 kg.

Sąlyga: geras (naudotas), two milling units two 1.5 kW motors pneumatic feed system sanding unit pneumatically actuated shoe maximum belt width 80 mm Fgedpfxjw A Rine Acuoh motor power 1.5 kW pneumatic oscillation two-axis adjustment of units variable feed speed control power supply 380 V

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Plastinė juostinė šlifavimo staklės CB 2NRT1100 Fgsdpfoid Ilcsx Acueh Gamybos metai: 1998 Darbinis plotis: 1100 mm Galima pristatyti iš karto!

Sąlyga: naujas, Belt width 75 mm Belt length 2000 mm Belt speed 30 m/s Total power requirement 3.0 kW Machine weight approx. 70 kg Space requirement approx. 610 x 944 x 1419 mm Mobile Belt Grinder PASOVEC 75 RUNNER Pasovec 75 RUNNER – the specialized belt grinder designed for flat grinding applications, especially for grinding weld seams on material surfaces. The Pasovec 75 Runner removes unwanted layers that occur during sheet metal rolling or after plasma or oxy-fuel cutting. Innovative, multifunctional machine Fgjdpfx Acok Uqg Seujh Infinitely variable adjustment of grinding depth Equipped with a dead man's switch Station for flat grinding of small workpieces Low operating costs

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, šlifavimo aukštis: 200 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 2 620 mm, šlifavimo juostos plotis: 1 400 mm, Heesemann Multi-purpose Wide Belt Sander, Type HSM .4 NEW Edition RQHD ROLLER/CROSS/LONGITUDINALDLB/DB-S Sanding width: 1,350 mm Column construction with transport bed Equipped with continuous conveyor belt, feed speed 3 - 15 m/min, frequency-controlled, workpiece thickness adjustable by motor (3 - 200 mm) Automatic workpiece thickness measurement at machine infeed Workpiece vacuum clamping system with adjustable vacuum For transport of workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven roller tables (2 each at machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multi-touch color display, CF card, operating system Windows Embedded Standard, touch screen design, display of production and downtime. Ethernet connection possible. Program memory for 100 programs Remote maintenance program Program for extraction flap control Customer-installed extraction flaps/slides can be actuated via the pre-installed, potential-free relay contacts, allowing connection of external pneumatic valves with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC). MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - LED strips at infeed and outfeed for operator assistance (infeed for optimal workpiece positioning, outfeed shows workpiece position) - Belt manager status display on the unit (screen) - Aggregate information including grit size (screen) - Visualization of the workpiece position as it passes through the machine - Video camera at machine outfeed Fgodpfx Aou Ic Rgocush 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross-belt sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW, frequency inverter 1 longitudinal sanding unit with segmented pressure beam system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with segmented pressure beam), 1.8 - 18 m/s (without segmented pressure beam) Drive power: 15 kW, frequency inverter Infinite adjustment of sanding belt speeds, wear-free brake system, automatic compensation for different belt edge lengths, counter-rotating sanding belt operation, oscillating belt cleaning, adjustable 2 pressure beams with computer-controlled selective pressure regulation system CSD® (10-year warranty) The electromagnetic CSD® system is maintenance-free as contamination like on pneumatic components is not possible. 1 Rotating disc brush unit DB-S 10 driven disc brushes, operable in two rotation directions, central height adjustment for abrasive wear, including quick-change device for disc brushes Brush trim: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of temporary power failure Energy Management System (EMS) Belt contact side: left Terminal: front left Workpiece blow-off device LED lighting inside the machine (on belt contact side) Further information available upon request.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, CG 3 – Hold Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and patented hold-down system. Ensures burr-free grinding of hold points while maintaining rubber performance. The pneumatic drive, powered by compressed air, delivers a very high and consistent pulling force that is always available, with no need for recharging cycles or battery replacements. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding. This allows the operator to grind hold points accurately and precisely. The depth of the hold point can be set exactly using the depth adjustment. The patented hold-down system for rubbers and ejector materials prevents grinding into the rubber or profile. The advantage: fewer and smaller hold points are required, and the performance of the die rubber is preserved. The hold point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for corrugated and solid board. Fgjdpfoxltkqox Acuoh Diamond grinding wheels allow for optimal placement of breakers. Compared to stone grinding wheels, they are extremely robust and less prone to breakage. Additionally, they are more durable and sustainable. The scope of delivery for the hold point grinder includes a matching diamond grinding wheel for the device in the desired size. Manual hold point tools are the ideal complement to the hold point grinder. The chisels can be used to enlarge the hold points after grinding if necessary. Two manual hold point tools are also included in the package free of charge. Key Benefits at a Glance: Pneumatic drive for consistently high traction force Large support area for straight and precise grinding of hold points Patented hold-down system for solid and corrugated board Note: The device operates with diamond grinding wheels in size 50 × 8 mm.

Sąlyga: naujas, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Netherlands Price: €4,417 Abrasive belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Lever adjustment: 1 Handwheel adjustment: 1 Fjdpfx Ajwir Dmjcuegh Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or with a lever; both options are available on the machine. With the AL100 U-02, you can grind material from Ø20 to Ø76 mm. The support cross and the carriage with swiveling clamp can be adjusted steplessly. This allows all tube profiles to be ground at any desired angle from 30° to 90°. The ALMI AL100U-02 is suitable for grinding square, rectangular, and round tubes with various wall thicknesses and for all standard materials. The ALMI belt adjustment system makes it even easier to set the abrasive belt using the supplied hex key. The grinding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. All tube notchers are equipped with a deburring table. Includes 5 pcs. abrasive belts, 1 pc. grinding roller Ø42.4 mm

Sąlyga: beveik kaip naujas (naudotas), du frezavimo agregatai du varikliai po 1,5 kW pneumatinis pridėjimas šlifavimo agregatas Fedpfx Acjxc Iw Tjusgh pridėtinė bata maksimalus juostos plotis 80 mm variklio galia 1,5 kW pneumatinė osciliacija agregatų reguliavimas dviem ašimis sklandus padavimo greičio reguliavimas maitinimas 380V

Sąlyga: naudotas, OTT Comet-2 1100 • Plačiajuostė šlifavimo staklės • Šlifavimo plotis 1100 mm • Mašina netestuota • Rekomenduojamas aptarnavimas Fsdpfxexfaa Eo Acuogh • Jokios garantijos / jokios atsakomybės • Iš sandėlio Lieboch, grynoji kaina 1.500,00 €

Sąlyga: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, su slankiuoju stalu, turinčiu ruošinio tvarkymo įrenginį 400 V, šlifavimo juostos greitis: v = 4–25 m/s šlifavimo juostos pavara su dažnio reguliuojamu trifaziu varikliu, galia P = 4,0 kW Dažnio keitiklis su stabdymo chopper'iu, stabdymo laikas maks. 10 s maks. ruošinio svoris tolygiai paskirsčius – 100 kg motorinis stalo aukščio reguliavimas rutulinėse kreipiančiose iki maks. 480 mm Fsdpfexgpbuox Acuogh pavara per pavarų variklį, galia P = 0,55 kW, reguliavimo greitis v = 0,9 m/min stalas 3000x1000 mm, šlifavimo juosta 100x9000 mm nusiurbimo antgalis D = 200 mm kairėje mašinos pusėje reikalinga nusiurbimo galia apie 3400 m3/h Standartinė mašinos spalva: RAL 5015 (dangiška mėlyna), RAL 7044 (šilkinė pilka); skirstymo ir gnybtų dėžutės: RAL 7032 (kvarco pilka)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 300 mm, šlifavimo aukštis: 160 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 2 150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only show machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubber-coated (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts Fjdpfxowcqr Ao Acujgh - LED lighting inside the machine - Vacuum table prepared (drilled) for blower connection - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air blast nozzle - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Sąlyga: naudotas, Gamybos metai: 2008, Šlifavimo plotis: 3000 mm Gylis: 1100 mm Svoris: 589 kg Sandėliavimo vieta: tiekėjas Fgsdpfx Aow Sy Hajcueh

Sąlyga: naujas, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €7,168 Leasing rate: €138.34 Bestseller 1 Belt dimensions: 150 x 2,000 mm Tube diameter: 20 – 114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The new AL150HS 2-in-1 machine, belt grinder and tube notcher. High belt speed with improved drive at 45 m/s. Highspeed advantages: less fine dust, reduced discoloration, 2–3x longer belt life. The AL150HS model can be operated either with two handwheels or with a lever. Both options are present on the machine. With the AL150HS model, you can notch materials from Ø20 to Ø114.3 mm. The support cross and the carriage with rotating clamp are infinitely adjustable. This allows all tube profiles to be notched at any desired angle from 30° to 90°. The ALMI AL150HS grinds square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the grinding belt has become even easier with the included hex key. The grinding belt can be tensioned quickly and changing the contact wheels takes only seconds. Tube notchers are equipped with a deburring table. Fgsdpfx Acjwirqtsueh Incl. 5 grinding belts, 1 contact wheel Ø 42.4 mm (Representative image)

Sąlyga: labai geros būklės (naudotas), Indexable insert grinding machine VOLLMER model Vodo Wii 240 TS Fedpfegg Nf Rex Acujgh

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 940 mm, šlifavimo aukštis: 150 mm, – pagaminimo metai: 2007 TECHNINIAI PARAMETRAI: – šlifavimo plotis: 940 mm – šlifavimo aukštis: 150 mm – min. ruošinio storis: 0,8 mm – min. ruošinio ilgis: 230 mm – padavimo variklio galia: 0,25 AG – pagrindinis variklis: 5,55 kW Fjdpfx Aew Ip Rtocujgh – šlifavimo velenai: 2 x ø 152 x 940 mm – apsukos: 1400 aps./min. – padavimo greitis: 2 arba 3 m/min. – ištraukimo jungties skersmuo: 2 x ø 100 mm – variklio galia: (400 V) 5600 W / S1 100% – matmenys (ilgis/plotis/aukštis): 1090 / 1420 / 1090 mm – svoris: 440 kg

Sąlyga: naudotas, Gamybos metai: 2019, Condition: Used Year of manufacture: 2019 Fgedpfx Acswiqwljueh Stock number: 5505 Delivery time: Immediate, subject to prior sale Country of origin: Netherlands Price: €2,670 In stock: 1 unit Belt dimensions: 100 x 2,000 mm Tube diameter: 20 – 76.1 mm Manual lever adjustment: 1 Motor power: 3 kW Weight: 190 kg DEMONSTRATION MACHINE / AS-NEW CONDITION Operation of the AL100U-01 model is by means of a lever. With the AL 100U model, you can notch material from Ø 20 to Ø 76.1 mm. The support cross and the sliding carriage with rotatable clamp are infinitely adjustable, allowing all tube profiles to be notched at any desired angle from 30° to 90°. The ALMI AL100U-01 machines out square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the sanding belt using the included hex key has become even easier. The sanding belt can be quickly tensioned, and changing the sanding rollers can be accomplished in just a few seconds. All tube notchers are equipped with a deburring table. Includes 5 sanding belts and 1 sanding roller, Ø 42.4 mm.

Sąlyga: labai geros būklės (naudotas), HM and HSS blank grinding machine with 8 workstations GRIFO model ACG80 Fsdpfsd Sxaaex Acuogh

Sąlyga: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Fgsdpfx Aoff H E Rscuoh