Juostinis šlifuoklis

NKO PASOVEC 75 RUNNER

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 Lajdeirax Ujpfx Akhsc - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Lajdpfx Ajd N H A Nekhsc Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Lodpfjtmqi Dox Akheac The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: Laodpfx Aju Et Nbokhoc - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Gamybos metai: 1990, būklė: naudotas, mašinos/transporto priemonės numeris: xxxx; Lg-Nr. 17250, Technical data: - Load capacity approx. 200 kg - Outreach 800 mm Lodedd Ilxspfx Akhsac - Working height in horizontal position approx. 1000 mm - Jib arm motorized, rotatable left and right - Jib arm manually tiltable - Faceplate motorized, rotatable left and right - Faceplate speed infinitely variable - Faceplate diameter 300 mm - Swiveling control panel with ESAB controls, - Type 6 PTF, year of manufacture 1997 - Space requirements approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 1 500 kg, Special offer: €2,000 discount Perforated table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, Bore diameter: 28 mm Swivel range: 360° Height adjustment: Hydraulic, Motorised 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Lajdpfx Asuua Injkhjc Load capacity 500 kg, Dimensions 1000 x 1500 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 1,000 kg, Dimensions 1000 x 2000 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 1,500 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 2,000 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 3,000 kg, Dimensions 1200 x 2400 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic Load capacity 5,000 kg, Dimensions 1500 x 3000 x 200 mm, Ø28 mm boreholes, height adjustment manual or automatic

Gamybos metai: 2015, būklė: naudotas, Rotator for containers, welding table, welding positioner, roller stand Ledpfx Ajc Ny H Askheac 1000 kg load capacity With foot remote control Continuously variable speed adjustment from 80 to 1600 mm/min For diameters from 20 mm to 700 mm

Būklė: geras (naudotas), Gamybos metai: 1984, mašinos/transporto priemonės numeris: 332, Offer 24130 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in cast iron GG 25: 40 mm - Tapping capacity in ST 60: M 27 - Drill spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min. / max.: 380 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Space requirement approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - With: - Tapping device - Hydraulic column and arm clamping Lajdpfx Akotxzrwehsc - Coolant system - T-slots on the vertical rear machine side

Būklė: naudotas, Gamybos metai: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel distance of drill head: 400 mm Drill head vertical adjustment: 400 mm Quill stroke: 150 mm Spindle taper: MK 4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat depth spindle: min./max.: approx. 400 / 50 mm Column vertical adjustment: 850 mm Column horizontal adjustment: 400 mm Column length: 1360 mm Column, horizontal: swiveling mm/min Drill spindle speed: 100...2-step rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance table to underside of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Approx. machine weight: 1.8 t Machine dimensions (LxWxH): approx. 1.3 x 1.3 x 2.25 m Equipment: Laedpfewi Iqvox Akhsc 2x foot rails Mounting option for a vertical table Accessories: various clamping tools

Būklė: geras (naudotas), Outreach: 915 mm Morse taper: 3 Lsdpfxjd Ixy Ij Akhoac Length: 1700 mm Width: 1,000 mm Height: 2000 mm Weight: 1000 kg