Shark 260 pirkti naudotą (2 839)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Velen
1 176 km
Juostiniai pjūklai - horizontali
MEPSHARK 281 SXI EVO
Skambinti
Būklė: naujas, Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 280 x 220 mm
Cutting capacity at 90 degrees, square: 220 x 220 mm
Speed range: 36 / 72 m/min
Saw blade dimensions: 2950 x 25.4 x 0.9 mm
Machine weight: approx. 0.4 t
Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m
Semi-automatic function:
The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off after the cut, the saw head lifts, and the vice opens.
Some features:
- New centralized control console mounted on a pivoting arm
- Next-generation hydraulic control system, highly efficient and low energy consumption
- Base frame with extendable coolant tank
Gedpfx Ahjfg E H Re Aoit
The machine fully complies with all CE regulations!
Mažas skelbimas
Velen
1 177 km
Juostinis pjūklas - horizontalus
MEPSHARK 282 SXI - Evo
Skambinti
Būklė: naujas, Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 280 x 220 mm
Cutting capacity at 90 degrees, square: 220 x 220 mm
Vice opening: 285 mm
Blade speed range: 36/72 m/min
Saw blade dimensions: 2950 x 27 x 0.9 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight approx. 485 kg
Space requirement approx. 1700 x 1000 x 1800 mm
Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO
with semi-automatic dynamic and manual operation, equipped with an MEP-28 control
unit for mitre cuts from 45° right to 60° left.
Semi-automatic function:
At the start of the cycle: - Vice closes and motor starts
– Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens.
Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.)
Key features:
Gsdpfx Ahjfg E H Ss Asit
- New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position.
- Low-voltage control panel:
- Polyester membrane keypad with thermoformed raised buttons and operation control light.
- Display shows:
* Diagnostics (messages in the user's language)
* Alarms (description of alarm causes)
* Status of inputs and outputs
* Cut counter
* Time required for the performed cut
* Saw motor current draw
* Blade tension
* Blade speed
* Numeric display of head position.
- Manual 24-V cycle switch handle, IP55 rated.
- Complete program for all special cutting cycles.
- Option to set up additional special cutting cycles for specific applications.
- Latest-generation hydraulic control unit, highly efficient with low energy consumption.
- Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed.
- Dual blade speed (36/72 m/min.) with control
- Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min.
- Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut.
- Clamping device adjustable to the left and right, with quick-release vice.
- Manual blade tension control with electronic converter display on screen.
- Base frame with extendable coolant tray.
- Electric coolant pump for band cooling and lubrication.
- Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil.
- Chip cleaning brush.
- Machine is designed for pallet truck transport.
- Length stop for repetitive cuts of equal length.
- Material support arm with roller, for securing the loading platform.
- Bimetal bandsaw blade for solid and profile material.
- Tools and operating instructions in the respective user language.
Mažas skelbimas
Vokietija
1 178 km
Juostiniai pjūklai - horizontali
MEPSHARK 332-1 CCS
Skambinti
Būklė: naujas, Cutting diameter: 300 mm
Bandsaw blade length: 3320 x 27 x 0.9 mm
Blade speed: 40/80 m/min
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 670 kg
Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed.
Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system)
Electronic blade tension converter with on-screen display.
Manual vise with quick-clamping device.
Gjdpfxofg E H Tj Ah Asit
Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory).
Electric coolant pump for cooling and lubrication of the bandsaw blade.
Chip removal brush.
Adjustable precision stops for repeated cuts of equal length.
Machine designed for pallet truck transport.
Bimetal bandsaw blade for solid and profiled material.
Tools and operating manual.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Pöttmes
1 142 km
Furgon
FiatDucato 35 L3H2 13m³ LED 260° 7´´ TFT Kamera PDC
Skambinti
Būklė: naudotas, rida: 10 km, galia: 132 kW (179,47 AG), pirmoji registracija: 03/2026, kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 03/2028, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,
Mažas skelbimas
Pöttmes
1 142 km
Furgon
FiatDucato 35 L3H2 13m³ LED 260° 7´´ TFT Kamera PDC
Skambinti
Būklė: naudotas, rida: 10 km, galia: 132 kW (179,47 AG), pirmoji registracija: 03/2026, kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, kita apžiūra (TÜV): 03/2028, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,
Mažas skelbimas
Pöttmes
1 142 km
Furgon
FiatDucato 35 L3H2 13m³ LED 260° 7´´ TFT Kamera PDC
Skambinti
Būklė: naujas, galia: 132 kW (179,47 AG), kuro tipas: dyzelinas, tuščias svoris: 2 212 kg, didžiausias leistinas svoris: 1 288 kg, bendras svoris: 3 500 kg, padangos dydis: 215/70R15C, ašių konfigūracija: 4x2, ratų bazė: 4 035 mm, CO₂ emisijos: 166 g/km, kuro sąnaudos (mieste): 7,7 l/100 km, kuro sąnaudos (užmiestyje): 5,9 l/100 km, kombinuota degalų sąnauda: 6,6 l/100 km, spalva: balta, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 3, bendras ilgis: 5 998 mm, krovinio erdvės tūris: 13 m³, krovimo vietos ilgis: 3 705 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, Gamybos metai: 2026, priekinės padangos dydis: 215/70R15C, galinės padangos dydis: 215/70R15C, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kabina, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys, suodžių filtras, trauki kontrolė, žemas triukšmo lygis,
Mažas skelbimas
Balve
1 148 km
Juostinis pjūklas
KASTOSBA 260 AU
Skambinti
Būklė: naudotas, Gamybos metai: 1991, galia: 3,5 kW (4,76 AG), įėjimo įtampa: 380 V, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 260 mm, pjovimo plotis (maks.): 260 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 100 mm, bendras plotis: 2 300 mm, bendras svoris: 1 280 kg, stalo aukštis: 700 mm, Siūlome šią naudotą KASTO SBA 260 AU juostinę pjūklą, pagamintą 1991 m.
Tipas: SBA 260 AU
Pagaminimo metai: 1991
Pjovimo skersmuo: 260 mm
Pjūklo juostos matmenys: 3830 x 27 x 0,9 mm
Kvadratinio pjovimo sritis: 260 x 260 mm
Pjovimo greitis, reguliuojamas: 19–110 m/min
Padavimo ilgis: 750 mm
Gsdpjy Eqavofx Ah Ajit
Daugiapadavimo ilgis: 6750 mm
Medžiagos atramos aukštis: 700 mm
Matmenys apie: 2100x2300x1720 mm
Įtampa/Dažnis: 380 V / 50 Hz
Galia: 3,5 kW
Saugiklis: 16 A
Maš. nr.: 101 378 6006/86249
Svoris apie: 1280 kg
Jeigu turite klausimų arba reikia papildomos informacijos, prašome parašyti žinutę arba paskambinti mums.
Mažas skelbimas
Miechucino
387 km
Medienos smulkintuvas Smulkintuvas
GoliathShark 60
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Goliath Shark 60 Wood Chipper
Gjdpfx Ast U Aaaeh Ajit
- Year of manufacture: 2010
- Made in Germany
- Equipped with a new set of knives and counterknife
TECHNICAL SPECIFICATIONS:
- Rotor width: 600 mm
- Motor power: 18.5 kW
- Number of knives: 30 pcs
- 30x30 mm serrated knife
- Drawer height: 170 mm
- Screen diameter: 12 and 15 mm
- Auto-reverse
- Infeed opening size: 600x830 mm
- Discharge outlet diameter: 160 mm
Transport dimensions:
180x130x170 cm
Weight approx. 1300 kg
Mažas skelbimas
Meerkerk
1 296 km
Lagaminas
DAFCF 260 FA
Skambinti
Būklė: naudotas, rida: 471 642 km, galia: 194 kW (263,77 AG), pirmoji registracija: 02/2021, kuro tipas: dyzelinas, padangos dydis: 315/70R22.5, ašių konfigūracija: 4x2, ratų bazė: 5 400 mm, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 2, bendras ilgis: 9 680 mm, bendras plotis: 2 550 mm, leistina ašies apkrova (ašis 1): 7 500 kg, leistina ašies apkrova (ašis 2): 11 500 kg, krovimo vietos ilgis: 7 570 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 560 mm, Gamybos metai: 2021, Įranga: ABS, Bluetooth, EBS (Elektroninė stabdžių sistema), centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), galinis keltuvas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, spoileris, suodžių filtras, trauki kontrolė,
Mažas skelbimas
Meerkerk
1 296 km
Lagaminas
DAFLF 260 FA
Skambinti
Būklė: naudotas, rida: 371 204 km, galia: 194 kW (263,77 AG), pirmoji registracija: 05/2021, kuro tipas: dyzelinas, padangos dydis: 285/70R19.5, ašių konfigūracija: 4x2, ratų bazė: 5 350 mm, kuras: dyzelinas, kuro bako talpa: 340 l, stabdžiai: variklio stabdymas, spalva: raudona, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, bendras ilgis: 9 490 mm, bendras plotis: 2 550 mm, leistina ašies apkrova (ašis 1): 6 000 kg, leistina ašies apkrova (ašis 2): 9 599 kg, krovimo vietos ilgis: 7 350 mm, krovinių skyriaus plotis: 2 500 mm, krovos erdvės aukštis: 2 620 mm, Gamybos metai: 2021, Įranga: ABS, Bluetooth, EBS (Elektroninė stabdžių sistema), centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), galinis keltuvas, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, spoileris, suodžių filtras, trauki kontrolė,
Mažas skelbimas
Hattingen
1 184 km
Juostinis pjūklas
KASTOSSB 260 VA
Skambinti
Būklė: naudotas, Gamybos metai: 1993, Pjovimo greitis: 15 - 125 m/min
Pjūvio skerspjūvis: 260 mm
Giodpfxsywzxce Ah Aot
Pjūklo juostos ilgis: 4 115 x 41 x 1,1 mm
Pjūvio plotis: 260 x 260 mm
Juostinis pjūklas | KASTO - SSB 260 VA
Įrenginys yra prižiūrėtos būklės.
Atkreipkite dėmesį, kad techninės specifikacijos priskirtos pagal panašius įrenginius.
Mažas skelbimas
Dreieich
1 172 km
Vibracinė apdailos sistema
RÖSLERR 260 EC
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Batch volume: 260 liters
Outer tank diameter: 1,300 mm
Tank diameter / tank height: 1,150 / 500 mm
Working bowl width: 300 mm
Motor power: 1.5 / 3.0 kW
Motor speeds: 985 / 1,480 rpm
Operating voltage: 400 V
Machine weight: approx. 740 kg
Required space: approx. 1.50 x 1.30 x 1.25 m
Vibratory finishing machine
- Serial No.: 15770 / 96-08
Gijdpfewa Uhpox Ah Aot
- Machine ON time: 37,851 h
- Timer
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPSHARK 332-1 NC 5.0
Skambinti
Būklė: naujas, Saw blade dimensions: 3650 x 27 x 0.9 mm
Cutting speed: 15 – 100 m/min
Vice opening: 335 mm
Cutting capacity at 90°: round 300 mm
Cutting capacity at 90°: square 260 mm
Cutting capacity at 90°: flat 330 x 260 mm
Cutting capacity at 45°: round 260 / 200 mm
Cutting capacity at 45°: square 250 / 180 mm
Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm
Cutting capacity at 60°: round 180 mm
Cutting capacity at 60°: square 170 mm
Cutting capacity at 60°: flat 170 x 170 mm
Total connected load: 2.2 kW
Weight: 1,105 kg
Gisdpfx Aheyv Nylj Ajt
Dimensions: 2700 x 2300 x 1800 mm
Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes.
- Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities.
- Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left)
- Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button)
- Manual or semi-automatic dynamic cycle for direct cutting operations without programming.
Selected features:
- New fieldbus communication system (Modbus protocol)
- Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language.
- Logging and display of alarm and error messages, with the possibility to review past incidents.
- Automatic parameter setting via control system when a new drive or inverter is installed.
- Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min.
- Latest generation hydraulic control unit, offering high performance and low energy consumption.
- New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings.
- Saw bow stroke programmable directly from the control panel for adaptation to the workpiece.
- Electronic blade tension monitoring.
- Automatic cutting force monitoring via a servo valve mounted directly on the cylinder.
- Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base.
- Chip drawer (can be replaced by a chip conveyor — see special accessories)
- Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication.
- Chip removal brush.
- Machine is configured for pallet truck transport.
- Bi-metal band saw blade suitable for solid and profile material.
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPSHARK 382-1 SXI EVO
Skambinti
Būklė: naujas, Cutting capacity at 90 degrees: round 300 mm
Cutting capacity at 90 degrees: square 250 mm
Cutting capacity at 90 degrees: flat 380x250 mm
Cutting capacity at 45 degrees left: round 260 mm
Cutting capacity at 45 degrees left: square 250 mm
Cutting capacity at 45 degrees left: flat 300x200 mm
Cutting capacity at 60 degrees left: round 180 mm
Cutting capacity at 60 degrees left: square 170 mm
Cutting capacity at 60 degrees left: flat 200x170 mm
Cutting capacity at 45 degrees right: round 240 mm
Cutting capacity at 45 degrees right: square 210 mm
Cutting capacity at 45 degrees right: flat 280x160 mm
Bandsaw blade dimensions: 3770x27x0.9 mm
Vise opening: 385 mm
Cutting speed: 40/80 m/min
Total power: 1.5/1.8 kW
Weight: 695 kg
Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual function. Equipped with MEP-30 control for mitre cuts from 45° right to 60° left. MEP 30 represents the latest generation of control systems.
Semi-automatic function:
- Vise closes and motor starts
- Saw head lowers for cutting
- Motor switches off
- Saw head raises
- Vise opens
Semi-automatic dynamic system:
- Manual lowering of the saw bow to the desired position
- Cycle start via hand button
- Upper position is automatically memorized
Main features:
- Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar)
- Electronic machine monitoring with next-generation microcontroller
- Electrical system centralized in main control cabinet
- Display of alarms, diagnostics and machine functions (cutting time, number of pieces cut, drive current of saw motor, saw head position, blade speed, blade tension)
- Manual/semi-automatic/dynamic operation as standard
Additional features:
- Low-voltage control panel: polyester membrane keypad with thermoformed, raised keys and confirmation signal
- Manual cycle selector lever, IP55, 24V
Gedpfjyv Ntrsx Ah Ajit
- Complete program for all special cutting cycles
- New hydraulic control unit with low energy consumption and stand-by mode
- Rotary table with roller bearing, 420 mm, fitted with preloaded thrust bearing and interchangeable steel work table
- Saw bow stroke programmable directly from the control panel to match cutting material
- Clamping device, laterally adjustable left and right, with quick-action vise
- Manual blade tension control with display on screen via electronic transducer
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 282 CCS
Skambinti
Būklė: naujas, Pjūklo juostos matmenys: 2950x27x0,9 mm
2 greičiai: 36/72 m/min
Veržlės atidarymas: 285 mm
Pjovimo sritis prie 90 laipsnių: apvali 250 mm
Pjovimo sritis prie 90 laipsnių: kvadratinė 220 mm
Pjovimo sritis prie 90 laipsnių: plokščia 280x220 mm
Pjovimo sritis prie 45 laipsnių: apvali 230/200 mm
Pjovimo sritis prie 45 laipsnių: kvadratinė 200/170 mm
Pjovimo sritis prie 45 laipsnių: plokščia 220x200/200x140 mm
Gjdeyv Nptepfx Ah Aoit
Pjovimo sritis prie 60 laipsnių: apvali 120 mm
Pjovimo sritis prie 60 laipsnių: kvadratinė 80 mm
Pjovimo sritis prie 60 laipsnių: plokščia 140x100 mm
Galia: 1,5 / 1,8 kW
Svoris: 440 kg
Matmenys: 1700x1000x1650 mm
- Su pusiau automatiniu nusileidimu
- CUT CONTROL SYSTEM leidžia pusiau automatinį pjūklo lanko nusileidimą pagal pjūklo galvos svorį
- Nusileidimo greitis reguliuojamas be pakopų, todėl vienkartiniai pjūviai gali būti atliekami tolygiai stumiant
- SHARK 282 CCS turi pasukamą stalą kampiniam pjovimui iš abiejų pusių. Pjovimas visada vyksta toje pačioje griovelyje
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 332-1 SXI EVO
Skambinti
Būklė: naujas, 2 speeds: 36/72 m/min
Cutting capacity at 90°: round 300 mm
Cutting capacity at 90°: square 260 mm
Cutting capacity at 90°: flat 330x260 mm
Cutting capacity at 60°: round 180 mm
Cutting capacity at 60°: square 170 mm
Cutting capacity at 60°: flat 170x170 mm
Cutting capacity at 45°: round 260/200 mm
Cutting capacity at 45°: square 250/180 mm
Cutting capacity at 45°: flat 270x200/200x160 mm
Saw blade dimensions: 3650x27x0.9 mm
Total power requirement: 1.5/1.8 kW
Machine dimensions: 2130x1400x1950 mm
Weight: 670 kg
Electro-hydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual operation. Equipped with an MEP-30 controller for mitre cuts from 45° right to 60° left. MEP 30 is the latest generation of controller.
Semi-automatic function:
- Vice closes and motor starts
- Saw head lowers to perform the cut
- Motor switches off
Gedpsyv Nmljfx Ah Aoit
- Saw head rises
- Vice opens
Semi-automatic dynamic system:
- Manual lowering of the saw bow to the desired position
- Cycle start via hand button
- Upper position is stored automatically
Main features:
- Hydraulic unit with high-efficiency electric valve and high-pressure hydraulic pump (200 bar)
- Electronic machine control with new generation micro-controller
- Electrical system centralised in the main switch cabinet
- Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current draw, saw head position, blade speed, blade tension)
- Manual/semi-automatic/dynamic function included as standard
Some features:
- Operating panel with low voltage: polyester membrane keypad with thermoformed, raised push buttons and acknowledgment control signal
- IP55 manual cycle lever, 24 V
- Complete program for all special cutting cycles
- New hydraulic controller with low energy consumption, standby operation
- Turntable on 420 mm roller bearing with preloaded thrust bearing and replaceable steel work table
- Saw bow lift travel programmable directly from the control panel for adapting to different cutting materials
- Clamping device adjustable laterally to the left and right, with quick-action vice
- Manual blade tension control with on-screen display via electronic converter
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 512 SXI EVO
Skambinti
Būklė: naujas, Bandsaw blade dimensions: 4640x34x1.1 mm
2 speeds: 15–100 m/min
Vice opening: 515 mm
Cutting capacity at 90 degrees: square 320 mm
Cutting capacity at 90 degrees: round 330 mm
Cutting capacity at 90 degrees: flat 510x320 mm
Cutting capacity at 45 degrees left: round 320 mm
Cutting capacity at 45 degrees left: square 320 mm
Cutting capacity at 45 degrees left: flat 350x320 mm
Cutting capacity at 60 degrees left: round 230 mm
Cutting capacity at 60 degrees left: square 230 mm
Cutting capacity at 60 degrees left: flat 230x310 mm
Cutting capacity at 45 degrees right: round 320 mm
Cutting capacity at 45 degrees right: square 320 mm
Cutting capacity at 45 degrees right: flat 380x320 mm
Cutting capacity at 60 degrees right: round 250 mm
Gedpjyv Nkkjfx Ah Asit
Cutting capacity at 60 degrees right: square 250 mm
Cutting capacity at 60 degrees right: flat 250x320 mm
Total power requirement: 4 kW
Weight: 1190 kg
Machine dimensions: 2000x1200x1800 mm
Electro-hydraulic semi-automatic bandsaw with MEP 30 controller for miter cuts from 0° to 60° left. The MEP 30 represents the latest generation of control units.
Semi-automatic operation:
- Vice closes and motor starts
- Saw head lowers for cutting
- Motor switches off
- Saw head raises and vice opens
Main features:
- Hydraulic unit with high-performance solenoid valve and high-pressure hydraulic pump (200 bar)
- Electronic machine control with new-generation microcontroller
- Centralized electrical system in the main control cabinet
- Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor power consumption, saw head position, bandsaw speed, blade tension)
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 281 SXI EVO
Skambinti
Būklė: naujas, 2 greičiai: 36/72 m/min
Spaustuvo atidarymo plotis: 285 mm
Pjovimo sritis 90° kampu: apvalus 250 mm
Pjovimo sritis 90° kampu: kvadratinis 230 mm
Pjovimo sritis 90° kampu: plokščias 280x200 mm
Pjovimo sritis 45° kampu: apvalus 190 mm
Pjovimo sritis 45° kampu: kvadratinis 180 mm
Pjovimo sritis 45° kampu: plokščias 180x180 mm
Godpsyv Nfusfx Ah Ajit
Pjovimo sritis 60° kampu: apvalus 120 mm
Pjovimo sritis 60° kampu: kvadratinis 110 mm
Pjovimo sritis 60° kampu: plokščias 110x110 mm
Pjūklinės juostos matmenys: 2950 x 27 x 0,9 mm
Galia: 1,5 / 1,8 kW
Svoris: 435 kg
Matmenys: 1700x1000x1840 mm
Pusiau automatinė funkcija:
- Spaustuvas uždaromas, variklis įsijungia
- Pjūklo galva nuleidžiama pjovimui
- Variklis išjungiamas
- Pjūklo galva pakeliama – spaustuvas atidaromas
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 350 NC HS 5.0
Skambinti
Būklė: naujas, Cutting range at 90°: round 350 mm
Giodjyv Nd Rjpfx Ah Aet
Cutting range at 90°: square 350 mm
Saw blade dimensions: 4640x34x1.1 mm
Vise opening: 355 mm
Saw blade speed: 15–115 m/min
Machine weight: approx. 2,800 kg
Space requirement: approx. 3050x2190x2200 mm
Shark 350 NC HS 5.0 – automatic hydraulic band saw machine in a double-column design for 0° cuts on solid materials and profiles of steel, stainless steel, and steel alloys up to max. 350x350 mm.
Standard equipment includes:
+ Powered chip conveyor, installable on either the right or left side of the machine.
+ Adjustable clamping pressure for the vices.
+ Feed unit with vertical rollers for lateral material support.
- Numerically controlled band saw machine, also operable in semi-automatic mode, equipped with the new MEP 50 control unit (Windows CE-based, developed by MEP for automatic machines).
- "Clean cut" cycle: The feeder pushes the workpiece backwards to avoid scoring on the cut surface when the blade returns at the end of the cut.
- Fieldbus communication system with dual microprocessor and serial connection.
- User interface with 7" touchscreen display and mechanical buttons for band saw operating functions, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.
- Automatic determination of the starting cutting position.
- CNC machine for storing up to 100 cutting programs with different quantities and cut lengths. It is also possible to select up to 100 programs as a sequence.
- Sturdy cast iron construction to absorb vibrations, ensuring stable cutting precision and long saw blade life.
- Hydraulic feed of the saw frame via linear guides with preloaded ball bearing rails.
- Hydraulic control unit for opening/closing the feed and front vices.
- Continuously variable saw blade speed from 15 to 110 m/min via vector inverter.
- Material feed via stepper motor and recirculating ball screw mounted on opposing bearings with a 600 mm stroke, repeatable for cutting any length.
- Maximum remnant length 120 mm + cut length (OPTIONAL: special feeder jaws to minimize remnant to 25 mm + cut length).
- Cut monitoring system (OPTIONAL).
- Material feeder with self-aligning feeder vice for feeding slightly bent material.
- Saw blade drive wheel secured by a conical clamping ring for optimal fastening and simultaneous axial adjustment.
- Management software for real-time control/evaluation/correction of:
- Cutting force
- Cutting torque and saw blade tension compared to programmed values.
- Adjustable saw blade guide heads made of steel with combined roller and hard metal guides, including control valves for traditional circulation lubrication.
- Prepared for installation of OPTIONAL minimal quantity lubrication system.
- Adjustment of the saw blade drive wheel for blade change directly from the operator console.
- Automatic adjustment of the front saw blade guide head to match material size.
- Machines...
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPSHARK 332-1 CCS
Skambinti
Būklė: naujas, Juostinio pjūklo matmenys: 3320x27x0,9 mm
2 greičiai: 40/80 m/min
Vise atidarymo plotis: 335 mm
Pjovimo sritis 90° kampu: apvalus 300 mm
Pjovimo sritis 90° kampu: kvadratinis 260 mm
Pjovimo sritis 90° kampu: plokščias 330x260 mm
Pjovimo sritis 45° į kairę: apvalus 260 mm
Pjovimo sritis 45° į kairę: kvadratinis 250 mm
Pjovimo sritis 45° į kairę: plokščias 270x200 mm
Pjovimo sritis 60° kampu: apvalus 180 mm
Pjovimo sritis 60° kampu: kvadratinis 170 mm
Pjovimo sritis 60° kampu: plokščias 170x170 mm
Pjovimo sritis 45° į dešinę: apvalus 200 mm
Pjovimo sritis 45° į dešinę: kvadratinis 180 mm
Pjovimo sritis 45° į dešinę: plokščias 200x160 mm
Staklių svoris apie 640 kg
Gisdpeyv Na Ssfx Ah Ast
Užimamas plotas apie 2140x1300x1950 mm
Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPShark 282 SXI EVO
Skambinti
Būklė: naujas, 2 greičiai 36/72 m/min
Spaustuvo atidarymas 285 mm
Juostinio pjūklo matmenys 2950 x 27 x 0,9 mm
Pjovimo sritis esant 90 laipsnių: kvadratas 220 mm
Pjovimo sritis esant 90 laipsnių: apvalus 250 mm
Pjovimo sritis esant 90 laipsnių: plokščias 280x220 mm
Gisdjyv Narjpfx Ah Aot
Pjovimo sritis esant 60 laipsnių: apvalus 120 mm
Pjovimo sritis esant 60 laipsnių: kvadratas 80 mm
Pjovimo sritis esant 60 laipsnių: plokščias 140x100 mm
Pjovimo sritis esant 45 laipsnių: apvalus 230/200 mm
Pjovimo sritis esant 45 laipsnių: kvadratas 200/170 mm
Pjovimo sritis esant 45 laipsnių: plokščias 220x200/200x140 mm
Bendras galios poreikis 1,5/1,8 kW
Svoris 485 kg
Staklių matmenys 1970x1150x1840 mm
Pusiau automatinė funkcija:
- Spaustuvas užsidaro ir variklis įsijungia
- Pjūklo galva nusileidžia pjovimui
- Variklis išsijungia
- Pjūklo galva pakyla, spaustuvas atsidaro
Pusiau automatinė dinaminė sistema:
Rankinis pjūklo lanko nuleidimas iki norimos padėties ir ciklo paleidimas rankiniu mygtuku.
Viršutinė padėtis įsimenama automatiškai.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Wien
929 km
Juostinis pjūklas
MEPSHARK 331-1 NC SPIDER 5.0
Skambinti
Būklė: naujas, Saw band dimensions: 3650x27x0.9 mm
Cutting speed: 15/100 m/min
Cutting capacity at 90° (round): 280 mm
Cutting capacity at 90° (square): 260 mm
Cutting capacity at 90° (flat): 330x260 mm
Cutting capacity at 45° (round): 260 mm
Cutting capacity at 45° (square): 250 mm
Cutting capacity at 45° (flat): 270x200 mm
Cutting capacity at 60° (round): 180 mm
Cutting capacity at 60° (square): 170 mm
Cutting capacity at 60° (flat): 170x170 mm
Total power requirement: 2.2 kW
Vise opening: 340 mm
Weight: 1240 kg
Dimensions: 2020x2040x1740 mm
Giodpfxeyv I Sys Ah Aet
Electrohydraulic fully automatic bandsaw with additional semi-automatic function, for cutting angles from 0° to 60° to the left.
Compact machine equipped with the new Windows "CE"-based MEP-50 controller and a 7" touch screen display for managing all machine parameters. Simple operation and real-time monitoring of all cutting parameters.
Material feed is operated by stepper motor via ball screw spindle mounted on opposing ball bearings; single stroke 600 mm – repeatable for any cutting length. Easy programming – just enter the cut length and quantity, then press "START".
- Electronic blade tension control
- Automatic monitoring of cutting load by servo valve mounted directly on the cylinder
- Blade rotation monitoring with instant stop in case of saw blade blockage
Chip removal brush and emulsion coolant pump included as standard.
Mažas skelbimas
HANDZAME
1 463 km
Sunkvežimis cisterna
VOLVOFE 260 +ALU CACIDEP 13.500L+4COMP
Skambinti
Būklė: naudotas, rida: 405 651 km, galia: 191 kW (259,69 AG), pirmoji registracija: 03/2014, kuro tipas: dyzelinas, padangos dydis: 315/80R22,5, ašių konfigūracija: 4x2, ratų bazė: 4 100 mm, kuras: dyzelinas, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, krovinio erdvės tūris: 14 m³, Gamybos metai: 2014, Įranga: elektrinis langų reguliavimas, oro kondicionavimas,
Mažas skelbimas
Grevesmühlen
833 km
Galandimo staklės
VollmerCHC 260
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Vollmer CHC 260
Pagaminimo metai: 1996
Gjdjyuc Ifepfx Ah Aeit
Mažas skelbimas
Sasbachwalden
1 300 km
Juostinis pjūklas
KASTOKASTOssb VA 260
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 000 mm, bendras ilgis: 2 000 mm, bendras plotis: 2 000 mm, juostinio pjūklo ilgas: 4 115 mm, pjūklo juostos plotis: 41 mm, Fully hydraulic high-performance band saw in extremely robust construction, with a horizontally and parallelly moving saw blade, designed for cutting profiles, pipes, and solid materials of all qualities, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for the use of bi-metal and carbide saw blades. The saw unit is constructed entirely from polymer concrete, ensuring maximum running smoothness and blade service life.
The saw unit is guided by one vertical and one round column guide (double-column guide) with hardened and ground guide rails. Hydraulic blade tensioning and hydraulically pre-tensioned carbide blade guides are provided.
Material clamping is achieved via two hydraulic vices. The machine operation is user-friendly. Cutting length can be set via hand wheel with 0.1 mm resolution. Piece count is set using a counter; upon reaching the preset number, the machine automatically stops. Material feed is via a feed cylinder for highest cut accuracy. The machines are easy to operate and work fully automatically.
SSB 260 VA
Gsdpsxc D Egsfx Ah Aeit
260 mm x 260 mm (Ø 260 mm)
Technical Data: Bandsaws KASTO
Band Saw Automatons
Machine type: SSB 260 VA
Technical specifications: double-column guided
Year of manufacture: 1991
Cutting range: 260 x 260 mm
Saw drive power: 4 kW
Auxiliary drive power: 6.5 kW
Cutting speed: 15–125 m/min
Saw feed hydraulics: infinitely variable
Blade dimensions: 4115 x 41 x 1.1 mm
Feed length: 600 mm
Max. with multiple feed: 5400 mm
Material support height: 850 mm
Machine dimensions:
Length/Width: 1690 x 1900 mm
Height: 2030 mm
Machine weight: 2100 kg
Accessories:
- Swarf conveyor
- Coolant system
- Multiple feed
- Side guide rollers
- Machine roller conveyor
- Adjustable side guide rollers
- Prepared for bundle clamping device
- Multiple feed counter
Palengviname jums paiešką: "shark 260"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Shark 260 (2 839)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo



































































































































































































