Sūpynės Iš Rankos pirkti naudotą (8 961)

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (or by varying the bay spacing); this example with 4 frames is just the most common racking solution! Knedoddmtcspfx Af Hja A galvanized cantilever racking system, consisting of: • 4 double-sided uprights approx. 3.50m high, hot-dip galvanized • IPE 160 / 80 • Each with 2x3 adjustable arms, 1.20 m, 500kg load capacity per arm • With braces approx. 1.30 m • Double-sided uprights approx. 3500mm high, hot-dip galvanized • Base and arm depth 1200 mm, each upright with 3 height-adjustable cantilever arms • Load capacity at load center 600mm: 500kg per arm / 2250kg per upright side • With longitudinal and diagonal bracing, bay spacing (e) = 1300mm, standard is 1.30m • Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m • From 1.50m bay length upwards, a small surcharge applies to the quoted price • Special sizes (other bay spacings) are available on request, but incur an additional cost and have a longer delivery time as they must be custom manufactured • Unless otherwise specified, the racking will be supplied with a bay spacing of 1.30m • With 4 upright frames (3 bays), the total length is approx. 4m • Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2017, būklė: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: Kjdpfsddmtqsx Af Hsna - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 750kg per arm – new unit: Price ex location including loading! 1 rack unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with stoppers for this rack: €40 Transport cost within Germany (excluding islands): €430 (net)! Of course, by omitting or purchasing additional uprights, you can assemble longer or shorter rack units (also by varying the bay distances); this example with 4 uprights is simply the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: Knsdpfx Aoddmp Aof Hja Single-sided uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth: 1,200 mm, each with 3 height-adjustable rack arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per load level: 4 x 750 kg = 3,000 kg, arms made of IPE 100, Including longitudinal and diagonal bracing, bay width = 1,300 mm (standard is 1.30 m – if you do not specify otherwise, we will deliver the rack at a bay width of 1.30 m. Other bay widths are possible, e.g. 1 m, 1.25 m, for a small surcharge also 1.50 m or special dimensions!) Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Delivery includes all bolts and nuts, excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New item: Price ex-works including loading! 1 rack unit with 4 uprights: €2,300 (net)! Shipping cost within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter rack units by removing or purchasing additional frames (or by adjusting the frame spacing); this example with 4 frames is just the most common configuration! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, e = 1300 mm. Standard is 1.30m – if you do not specify otherwise, the racking will be supplied with a 1.30m frame spacing. Other spacings available, e.g. 1.0m, 1.25m, or for a small extra charge, 1.50m or custom dimensions! Standard delivery length for a rack row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Kedpfxsddmp Us Af Hona

Gamybos metai: 2021, būklė: naujas, Cantilever racking, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW – : Price ex stock including loading! Ksdpfx Asddmqysf Hjna 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (mainland only): €550 (net)! Of course, you can also construct longer or shorter racking units by omitting or purchasing additional uprights (or by using different bay distances). The example with 4 uprights is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided racking uprights, approx. 5.18m high, hot-dip galvanized - IPE 180 / 100 - Each upright with 2 x 3 adjustable arms, 1.20m long, 860kg load capacity per arm - Includes bracing, approx. 1.30m spacing - Uprights double-sided, approx. 5180mm high, hot-dip galvanized - Foot and arm depth 1200mm with 3 height-adjustable arms per side - Load capacity with 600mm load center: 860kg per arm / 2,600kg per upright side - With horizontal and diagonal bracing, bay distance = 1,300mm (standard is 1.30m) - Other standard bay distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m upwards, a small surcharge applies to the listed price! - Special dimensions (different bay distances) are available on request, but are also subject to a surcharge and have a longer delivery time as they must be made to order! - If you do not specify a different bay distance, the racking will be supplied with a 1.30m bay distance. - With 4 uprights (3 bays), the total row length is approx. 4m. - Supplied with all bolts and nuts (shipping within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar racking system!

Gamybos metai: 2021, būklė: naujas, The prices stated in this advertisement are the prices as of mid-2021. Due to the current international situation, the price of steel and transportation is increasing almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to request current prices and availability! We would be pleased to provide you with a current offer! Cantilever racking, double-sided, 4.16 m height, 1.20 m arms, 500 kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport price within Germany (excluding islands): €425 (net)! Kodpfeddmr Nox Af Hsna Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or with different bay spacings); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized - IPE 160 / 80 - each with 2 x 3 adjustable arms 1.20 m, 500 kg load capacity per arm - with bracing approx. 1.30 m - Double-sided uprights approx. 4,160 mm high, hot-dip galvanized - Base and arm depth 1,200 mm each, with 3 height-adjustable arms per side - Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,250 kg per upright side - With longitudinal and diagonal bracing, center distance = 1,300 mm, standard is 1.30 m. - Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a length of 1.50 m, a small surcharge applies to the stated price! - Special sizes (different bay spacings) are also available on request, but these also incur an additional charge and have a longer delivery time as they need to be custom-made! - If you do not specify a different bay spacing, we will supply the rack with a bay spacing of 1.30 m. In this case, the length for a single rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.

Būklė: naudotas, rida: 407 797 km, galia: 324 kW (440,52 AG), pirmoji registracija: 02/2016, kuro tipas: dyzelinas, ašių konfigūracija: 6x2, kuras: dyzelinas, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 11 500 kg, leistina ašies apkrova (ašis 3): 7 500 kg, Gamybos metai: 2016, Įranga: AdBlue, centrinis užraktas, kruizo kontrolė, suodžių filtras,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: RA 7512-3052-FA, bendras plotis: 550 mm, bendras ilgis: 850 mm, bendras aukštis: 350 mm, bendras svoris: 25 kg, Didžiausias Hexagon matavimo rankos serijos tikslumas! TECHNINĖ INFORMACIJA Matavimo diapazonas: 1,2 m Etaloninės liniuotės ilgis: 305 mm Etaloninio rutulio skersmuo: 25 mm ĮRANGOS DETALĖS Matmenys ir svoris Transporto dėžės išoriniai matmenys: 850 x 550 x 350 mm Bendras svoris su dėže: 25 kg KOMPLEKTACIJA Mobility Pack FP2-2659-FA (galimas belaidis ryšys su kompiuteriu) ASUS nešiojamas kompiuteris / Win 10 / SSD PcDmis 2016 / RDS programinė įranga Transportavimo lagaminas 3 magnetai Daviklių dėžė su 3 davikliais 6 mm rubino rutulys 3 mm rubino rutulys 15 mm kalibravimo rutulys Dulkėms atspari apsauga Pilnas laidų komplektas USB atmintinė su RDS programine įranga Ksdpfx Afozclvno Hona

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ZF1RT2101C4131380, Gamybos metai: 2014, veikimo valandos: 11 800 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 26 000 mm, tuščias svoris: 16 050 kg, rankos pasiekiamumas: 22 900 mm, The telescopic handler was serviced three months ago. During maintenance, among other things, the slew ring bolts were replaced and both engine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical System Operating voltage: 12 V Battery capacity: 160 Ah Drive and Steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock attachment coupler Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Kjdpfx Afjxr Axds Hsna Note: The winch (€4,000) and basket (€1,000) can be purchased separately if required.

Būklė: naujas, Gamybos metai: 2025, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: Steel + aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: Dual-sided gantry drive with 4Nm stepper motors and gear reductions, rack and pinion accuracy class 8 Z axis drive: Stepper motor with ball screw Travel speed: up to 25 m/min Z-axis control system: THC MyPlasm system Collision system: torch protection system Linear guides: Hiwin Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1000 kg Kedpsnfvmdjfx Af Hsna INCLUDED: - Control panel - Water table - Replaceable grate - Control software in German, English, and Polish - CE declaration of conformity - Technical documentation (DTR) - Warranty Possibility to select an appropriate Hypertherm plasma source tailored to the individual needs of the company.

Gamybos metai: 1995, būklė: labai geros būklės (naudotas), semi-automatic stellite tipping machine for equipping saw blades suitable for band, circular, and gang saw blades with central height adjustment Knjdpfedr Uikjx Af Hja band saw support at the front

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ZF1RT2101C4131380, Gamybos metai: 2014, veikimo valandos: 11 800 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 26 000 mm, tuščias svoris: 16 050 kg, rankos pasiekiamumas: 22 900 mm, The telescopic handler was serviced three months ago. During this service, the slew ring bolts were replaced, and both the engine and hydraulic oils were maintained. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 hp Fuel tank: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Kjdpfx Ajx Dmgvof Hsna Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically-controlled stabilizers Hydropneumatic suspension Tilting cabin with FOPS certification Electronic joystick control Merlin control system Tac-Lock quick coupler Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Note: The winch (€4,000) and the basket (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Būklė: naudotas, rida: 345 086 km, galia: 184 kW (250,17 AG), pirmoji registracija: 04/2014, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: mėlyna, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, Gamybos metai: 2014, Įranga: AdBlue, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, suodžių filtras,

Gamybos metai: 1988, būklė: geras (naudotas), Load capacity: 10 t Arm length: 1,400 mm Arm diameter: 300 mm Knodpfx Aslimtvjf Hea Coil outer diameter: max. 1,300 mm

Gamybos metai: 1988, būklė: geras (naudotas), Load capacity: 10 t Knedpfx Ajrryyof Hsa Arm length: 1,400 mm Arm diameter: 300 mm Coil outer diameter: max. 1,300 mm

Būklė: naujas, Sheet length: 2100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 5500 kg Dimensions (LxWxH): 3110x2195x1770 mm Our robust brand KK Kletzer CNC GUILLOTINE SHEAR, oscillating cutting version, model SWT, has everything you need for cutting tasks. We have also raised the standard for the oscillating cut version and deliver all our shears with automatic blade gap adjustment via the ELGO P40T touchscreen control at no extra charge. NC link-guided guillotine shear KKI Technological Advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical specifications: Maximum sheet thickness: 6 mm Cutting length: 2,100 mm Cutting angle: 1.5° Kjdpfjfhlbdsx Af Hsna Number of hold-downs: 15 Back gauge: 1,000 mm, CNC-controlled Motor power: 11 kW Strokes per minute: 18 Throat depth: 50 mm Oil tank capacity: 200 liters Length: 3110 mm Width: 2195 mm Height: 1770 mm Weight: 5500 kg • Sturdy oscillating cut design • Blade gap adjustment via control system - Back gauge - Blade gap - Cutting length • Ball screw spindle for back gauge • Balls in worktable • Side stop 1,500 mm • 2 support arms, 1,000 mm each • Cutting line illumination • Flip-up finger guard (up to 1,000 mm) Option: - Pneumatic sheet support, EURO 3,900.-- We have many references!

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut design NC preset control ELGO P 40 T Touch with backgauge and blade gap adjustment from the front via the control panel Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and re-sharpening Adjustable cutting length for efficient processing Kjdpfjd Ab Hhox Af Hona Lower blade with 4 usable edges Upper blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE standards

Būklė: naujas, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Knsdpfx Ajd Ab Hief Hsa Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Equipment: Swing beam shear design NC-preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control unit Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Footswitch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers 1,000 mm foldable finger guard 1 T-slot side gauge 2 sheet support arms with T-slots Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade can be rotated four times Upper blade can be rotated twice Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Kjdpfx Afsd Ab Hlo Hjna Frame gap: 3,100 mm Total power requirement: 18.5 kW Weight approx.: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and cutting gap adjustment from the front via the control unit motorized backgauge up to 1,000 mm clearly arranged control panel mounted on a swing arm hydraulic hold-downs positioned close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easy replacement and re-grinding of blades adjustable cutting length for economic processing bottom blade with 4 cutting edges top blade with 2 cutting edges qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Būklė: naujas, Sheet length: 4100 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 15,500 kg Dimensions (LxWxH): 4120x2240x2235 mm Our strong brand KK Kletzer CNC GUILLOTINE SHEAR Swing Beam Design Model SWT has everything you need for cutting. We have also raised the standard for swing beam guillotines and now deliver our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control system, at no extra charge. NC linear-guided guillotine shear KK Kletzer Technological advantages: - Fast and precise cuts - Rigid, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 13 mm Cutting length: 4,100 mm Cutting angle: 2.3° Number of hold-downs: 19 Backgauge: 1,000 mm CNC controlled Motor power: 30 kW Strokes per min: 8 Throat depth: 50 mm Length: 5120 mm Width: 2240 mm Height: 2235 mm Weight: 15,500 kg • Rigid swing beam design • Blade gap adjustment via control system - Backgauge - Blade gap - Cutting length • Ball screws for the backgauge • Balls embedded in table • Side gauge 1,500 mm Knodpfxsd Tm Rce Af Hea • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Option: Pneumatic sheet support, EURO 4,900 We have many references!

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 10.0 mm Total power requirement: 11 kW Approximate weight: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Knodpfjd Ab Hnox Af Hsa — Technical Specifications: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg — Equipment: Swing-cut design NC pre-selection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control panel motorized backgauge up to 1,000 mm clear operator panel mounted on swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable 1,000 mm finger guard 1 lateral stop with T-slot 2 sheet support arms with T-slot easy blade replacement and regrinding adjustable cutting length for efficient processing lower blade usable on four sides upper blade reversible once qualified after-sales service OPERATING MANUAL IN ENGLISH Machine and equipment comply with CE regulations

Būklė: naujas, Sheet length: 3100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Approximate weight: 7000 kg Dimensions (LxWxH): 4110 x 2195 x 1770 mm Our strong brand, KKKletzer CNC GUILLOTINE SHEAR swing beam type, Model SWT, provides everything you need for precise cutting. Even in the swing beam design, we have raised the standard and now supply our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control, without extra charge. NC link-guided guillotine shear KKI Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cutting length: 3,100 mm Cutting angle: 1.5° Number of hold-downs: 15 Backgauge: 1,000 mm via CNC Motor power: 11 kW Strokes per minute: 16 Throat depth: 50 mm Oil tank: 200 liters Length: 4,110 mm Width: 2,195 mm Height: 1,770 mm Weight: 7,000 kg • Stable swing beam construction • Blade gap adjustment via control system - Backgauge - Blade gap - Cutting length • Ball screw drive for backgauge • Ball transfers in the table Knedpjd Eqrnsfx Af Hea • Side gauge 1,500 mm • 2 support arms 1,000 mm each • Cutting line illumination • 1,000 mm foldable finger guard Option: • Pneumatic sheet support, EURO 3,900.-- We have many references!

Būklė: naujas, Sheet length: 4100 mm Sheet thickness: 6.0 mm Total power requirement: 15 kW Weight approx.: 10,200 kg Dimensions (LxWxH): 4120x2195x1770 mm Our strong brand KK Kletzer - CNC GUILLOTINE SHEAR swingshear design Knsdpfjd Tm Rbsx Af Hea Model SWT has everything you need for cutting. We have also raised the standard in the swing beam design and supply our guillotine shears with automatic blade gap adjustment via ELGO P40T touchscreen control at no extra charge. NC guided guillotine shear KKI Technological advantages: - Fast and precise cuts - Robust, durable frame construction - Automatic blade gap adjustment - Easy to operate - Low maintenance costs - High safety standard - Use of components from well-known manufacturers - Low unit costs Technical Data: Sheet thickness: 6 mm Cutting length: 4,100 mm Cutting angle: 1.5° Number of hold-downs: 19 Backgauge: 1,000 mm via CNC Motor power: 15 kW Strokes per minute: 12 Throat depth: 50 mm Length: 5120 mm Width: 2195 mm Height: 1770 mm Weight: 10,200 kg • Robust swing beam design • Blade gap adjustment via controller - Backgauge - Blade gap - Cutting length • Ball screw spindle for backgauge • Ball transfers in the table • Side stop 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Flip-up finger guard to 1,000 mm Option: Pneumatic sheet support, EUR 4,900 We have numerous references!

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Knsdpfx Afod Ab Hms Hja - Technical Data: Sheet thickness: 13 mm Cutting length: 3,200 mm Cutting angle: 2.0° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,050 mm Height: 2,100 mm Weight: 11,700 kg Equipment: Swing cut design NC preselection control ELGO P 40 T Touch with back gauge and cutting gap adjustment from the front via EURO P 40 Touch control unit Motorized back gauge up to 1,000 mm Clear operator panel mounted on swing arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers 1,000 mm flip-up finger guard 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade with 4 usable edges Upper blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: FARO-PT08, Well-maintained Faro Fusion measuring arm with 6 axes Measuring arm length: 6 ft (approx. 1.8 m) Accuracy: 36 / 51 µm Last calibration: 2011 Includes new Aberlink 3D software (free updates) Windows 10 PC or laptop (used) Optionally available with Inca Premium software (+ €4,000) or other options (Polyworks, PcDmis, MCosmos, etc.) Measuring plate 1500x1000 available on request Software training available upon request Knjdpjpqx Ifofx Af Hsa