3 D suvirinimo stalų sistemos be aukščio reguliavimo

Unknown Schweißtisch groß 2480 x 1200

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm Gjdpfed Auacsx Abdeil • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: paruoštas naudoti (naudotas), Sertom brand hydraulic plate rolling machine, length 25,000 mm with feed-in, two lower rollers diameter 300 mm, upper roller diameter 318 mm, maximum thickness 14 mm. Rotation motor: 22 kW, movement motor: 5.5 kW, frame motor: 2.5 kW. Overall dimensions: 600 x 190 x 210 (H) cm. Weight: 15,500 kg. Godpsnr Npyofx Abdsil

Sąlyga: naudotas, Plate width: 2510 mm Plate depth: 5135 mm Plate height: 345 mm Weight approx. 10 t Space requirement approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Number of T-slots: 9 Slot spacing: 220 mm Gijdohpvavepfx Abdsl Edge distance: 240 mm Slot size: 28 mm

Sąlyga: geras (naudotas), Gamybos metai: 1986, mašinos/transporto priemonės numeris: 8618030, Offer 25182 Gedpfxowq It To Abdeil Technical Data: - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and lower roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right & left: 6 m/min - Drive: 380 V / 6.2 kW - Required space approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - with: - Asymmetrical roller arrangement - Crowned, induction-hardened rollers - Manual rear roller adjustment - Pre-bending - Swivelling upper roller - Electric foot switch for right and left operation

Sąlyga: naudotas, rida: 19 950 km, pirmoji registracija: 11/1989, kuro tipas: dyzelinas, ašių konfigūracija: 4x4, pavaros tipas: mechaninis, Gamybos metai: 1989, Įranga: visų varančiųjų ratų pavara,

Sąlyga: naujas, Hydraulic Punch and Shear Machine SAHINLER HKM 65 Exerted force: 65 Ton Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H) Weight: 1,600 kg Godjggbuhjpfx Abdeil PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Sąlyga: naujas, Gamybos metai: 2025, Table length: 1000 mm Table width: 2000 mm Table height: 200 mm Weight: 650 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 1000 mm • Height: 200 mm • Weight: 650 kg Gjdpfeuia Naex Abdsil • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Increased fatigue strength • Increased vibration resistance • Fine scale graduations • Reinforcement through weld seams and ribs on the underside • Optimal working height from 820–865 mm • 6 height-adjustable support legs • With matching accessory set (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single unit after mechanical machining. In addition, these tables feature precise fine gradations, which are laser-engraved. To ensure appropriate stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). They also undergo a 3-day gas nitriding process which, among other benefits, enhances the corrosion resistance as well as the fatigue and vibration strength of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, and the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not reflect actual size and serve for illustrative purposes only. Our welding tables are manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Gamybos metai: 2009, Sąlyga: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: FARO-PT08, Well-maintained Faro Platinum measuring arm with 7 axes Measuring arm length: 8 ft (approx. 2.4 m) Accuracy: 30 / 43 µm Last calibrated in 2012 Includes new Aberlink 3D software (free updates) Windows 10 HP notebook (used) Optional: Inca Premium software available (+ €4,000) Other options (Polyworks, PcDmis, MCosmos, etc.) also possible Giodpslwktpsfx Abdol Measuring table 1500x1000 available on request Software training available upon request

Sąlyga: naudotas, Column Drilling Machine ALZMETALL Type AB 3 ESV Gedpeharwvjfx Abdoil Machine No. 15967 Year of Manufacture: 1977 Drilling Capacity: 32 mm Spindle Mount: MT 3 – Short quill Distance Spindle Nose – Table: 545 mm (short quill) Distance Spindle Adapter – Table: 395 mm (MT Adapter) Throat: 290 mm Quill Stroke: 160 mm Table Size: Ø 545 mm Column Diameter: 220 mm Spindle Speed: 55 – 1,450 rpm, infinitely variable Motor Power: 1 / 1.6 kW Electrical Connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and steplessly via variator gearbox - Intermediate stage for high torque at low speeds - MT Adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swivelling drilling table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1,150 x 650 x 2,000 mm Weight: 850 kg Good condition

Sąlyga: naujas, Bernardo Manual Metal Circular Saw CS 315 H Technical Specifications Saw blade diameter: 315 x 40 mm Speed: 19 / 38 rpm Maximum vice opening: 150 mm Working height: 920 mm Motor output S1 100%: 0.75 / 1.5 kW Motor input S6 40%: 1.0 / 2.1 kW Voltage: 400 V Machine dimensions (W x D x H): 530 x 1000 x 1740 mm Weight approx.: 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Tube, round 90°: 80 mm 45°: 70 mm Square tube 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Rectangular tube 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gijdpod Id Ugjfx Abdjl Gear head swivels 90° to the right and left for slotting operations Removable coolant tank integrated into the robust machine base Gear unit with hardened and ground worm shaft and bronze worm wheel Safety guard automatically opens during cutting Precision 4-way guided, self-centering double vice Ergonomically shaped handle with push button for fatigue-free cutting Low saw blade speed (19 / 38 rpm) is ideal for cutting solid materials Low-noise gear transmission running in an oil bath Scope of delivery Coolant system with filter Self-centering vice Machine base