Sūpynės Iš Rankos pirkti naudotą (126 200)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodamos ritininių bėgių juostos dviejų ilgių: 4560 mm → 4,00 € be PVM / vnt. (apie 1000 vnt. prieinama) 4230 mm → 3,75 € be PVM / vnt. (apie 1000 vnt. prieinama) Bendras kiekis: apie 2000 vnt. Vieta: Leineweberring 15, 21493 Elmenhorst Gjdpfxsxf Ui Ie Acusuh  Mielai pateiksime Jums neįpareigojantį pasiūlymą Pardavimas, montavimas, išmontavimas, remontas, supirkimas

Gamybos metai: 2021, Sąlyga: naujas, The prices stated in this advertisement are the prices as of mid-2021. Due to the current international situation, the price of steel and transportation is increasing almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to request current prices and availability! We would be pleased to provide you with a current offer! Cantilever racking, double-sided, 4.16 m height, 1.20 m arms, 500 kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter rack units (or with different bay spacings); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized - IPE 160 / 80 - each with 2 x 3 adjustable arms 1.20 m, 500 kg load capacity per arm - with bracing approx. 1.30 m - Double-sided uprights approx. 4,160 mm high, hot-dip galvanized - Base and arm depth 1,200 mm each, with 3 height-adjustable arms per side - Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,250 kg per upright side - With longitudinal and diagonal bracing, center distance = 1,300 mm, standard is 1.30 m. - Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a length of 1.50 m, a small surcharge applies to the stated price! Guodpfoddmr Nox Acush - Special sizes (different bay spacings) are also available on request, but these also incur an additional charge and have a longer delivery time as they need to be custom-made! - If you do not specify a different bay spacing, we will supply the rack with a bay spacing of 1.30 m. In this case, the length for a single rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors.

Sąlyga: labai geros būklės (naudotas), Mitsubishi Industrial 6-Axis Articulated Arm Robot We are offering a Mitsubishi Industrial 6-Axis Articulated Arm Robot. Mitsubishi Industrial 6-Axis Articulated Arm Robot 6-Axis Articulated Arm Robot RV-3SB Max. load capacity: 3.5 kg Weight: 38 kg Robot Controller: CR2B-574-S312 Teach pendant: R46TB with color/touch display Model: Mitsubishi Melfa RV-3SB Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors in data and specifications!) For any further questions, we are happy to assist you by phone. Gedpfei El Acox Acuouh

Gamybos metai: 2021, Sąlyga: naujas, Cantilever racking, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW – : Price ex stock including loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (mainland only): €550 (net)! Of course, you can also construct longer or shorter racking units by omitting or purchasing additional uprights (or by using different bay distances). The example with 4 uprights is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided racking uprights, approx. 5.18m high, hot-dip galvanized - IPE 180 / 100 - Each upright with 2 x 3 adjustable arms, 1.20m long, 860kg load capacity per arm - Includes bracing, approx. 1.30m spacing - Uprights double-sided, approx. 5180mm high, hot-dip galvanized - Foot and arm depth 1200mm with 3 height-adjustable arms per side - Load capacity with 600mm load center: 860kg per arm / 2,600kg per upright side - With horizontal and diagonal bracing, bay distance = 1,300mm (standard is 1.30m) - Other standard bay distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m upwards, a small surcharge applies to the listed price! - Special dimensions (different bay distances) are available on request, but are also subject to a surcharge and have a longer delivery time as they must be made to order! - If you do not specify a different bay distance, the racking will be supplied with a 1.30m bay distance. - With 4 uprights (3 bays), the total row length is approx. 4m. - Supplied with all bolts and nuts (shipping within Germany as a parcel directly from Würth), without floor anchors. Guededdmqyopfx Acujh Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar racking system!

Sąlyga: labai geros būklės (naudotas), Here we offer a Mitsubishi industrial 6-axis articulated arm robot. Mitsubishi Industrial 6-Axis Articulated Arm Robot 6-Axis Articulated Arm Robot RV-3SDB-S15 The articulated arm robot RV-3SDB The RV-3SB robot is specifically designed for handling payloads up to 3.5 kg. The housing, in compliance with IP65 standard, ensures operation under extreme conditions. Key features: • Adjustable axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Sealed construction • Adaptive speed optimization Feature/Function Degrees of Freedom (number of axes): 6 Design: Standard (oil mist) Mounting: Floor, wall, or ceiling mounting possible (wall mounting with restriction on J1 axis) Construction: Vertical articulated arm Drive system: AC servo (all axes with brakes) Position detection: absolute encoder Movement range (degrees): Base (J1): 340 (−170 to +170) Shoulder (J2): 225 (−90 to +135) Elbow (J3): 191 (−20 to +171) Forearm rotation (J4): 320 (−160 to +160) Wrist pitch (J5): 240 (−120 to +120) Wrist rotation (J6): 720 (−360 to +360) Movement speed (degrees/s): Base (J1): 250 Shoulder (J2): 187 Elbow (J3): 250 Forearm rotation (J4): 412 Wrist pitch (J5): 412 Wrist rotation (J6): 660 Resultant maximum speed: 5500 mm/s Payload nominal: 3 kg, maximum: 3.5 kg Reach radius (to rotation center of J5 axis): 642 mm Weight: 37 kg Robot controller: CR1DA-721-S15 control unit (230V) Teach pendant: R46TB with color/touch display Technical data: Dimensions (W × H × D): 252 × 240 × 114 mm Gujdpfx Ajd H E H Uscuoh Weight: 1.25 kg Connection type: • Connection to robot controller with round plug; cable length: 7 m • Interfaces: RS422 • For connection to the robot controller Display/Monitor: • 6.5" touch-sensitive TFT monitor with backlighting and 640 × 480 pixel resolution; touchscreen can be operated with fingers or stylus. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications excepted!) If you have any further questions, feel free to contact us by telephone.

Gamybos metai: 2021, Sąlyga: naujas, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New item: Price ex-works including loading! 1 rack unit with 4 uprights: €2,300 (net)! Shipping cost within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter rack units by removing or purchasing additional frames (or by adjusting the frame spacing); this example with 4 frames is just the most common configuration! A hot-dip galvanized cantilever racking system, consisting of: Gsdpfx Aoddmp Uecueuh Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms Load capacity with load center at 600 mm: 750 kg per arm / 2250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, e = 1300 mm. Standard is 1.30m – if you do not specify otherwise, the racking will be supplied with a 1.30m frame spacing. Other spacings available, e.g. 1.0m, 1.25m, or for a small extra charge, 1.50m or custom dimensions! Standard delivery length for a rack row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, Sąlyga: naujas, Cantilever rack, single-sided, 3m height, 1.20m arms, 750kg per arm – new unit: Price ex location including loading! 1 rack unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with stoppers for this rack: €40 Transport cost within Germany (excluding islands): €430 (net)! Of course, by omitting or purchasing additional uprights, you can assemble longer or shorter rack units (also by varying the bay distances); this example with 4 uprights is simply the most common rack solution! Gusdpfeddmp Asx Acujh A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth: 1,200 mm, each with 3 height-adjustable rack arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per load level: 4 x 750 kg = 3,000 kg, arms made of IPE 100, Including longitudinal and diagonal bracing, bay width = 1,300 mm (standard is 1.30 m – if you do not specify otherwise, we will deliver the rack at a bay width of 1.30 m. Other bay widths are possible, e.g. 1 m, 1.25 m, for a small surcharge also 1.50 m or special dimensions!) Standard delivery length for a rack row with 4 uprights is approx. 4,000 mm. Delivery includes all bolts and nuts, excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2017, Sąlyga: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, consisting of: Gjdeddmtqopfx Acusuh - 4 double-sided rack uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each upright fitted with 2 x 3 height-adjustable arms, 1.20m long, 750kg load capacity per arm - Including bracing approx. 1.30m - Upright height approx. 3500mm, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity with centre of gravity at 600mm: 750kg per arm / 2,250kg per upright - Supplied with longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! - For bay widths from 1.50m, a small extra charge applies in addition to the stated price! - Special dimensions (other upright spacings) are available upon request, subject to an extra charge and longer delivery time as these are custom-made! - If you do not specify a different upright spacing, the racking will be supplied with a bay width of 1.30m. - In this case, the total length for one rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, Sąlyga: naujas, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (or by varying the bay spacing); this example with 4 frames is just the most common racking solution! A galvanized cantilever racking system, consisting of: • 4 double-sided uprights approx. 3.50m high, hot-dip galvanized • IPE 160 / 80 • Each with 2x3 adjustable arms, 1.20 m, 500kg load capacity per arm • With braces approx. 1.30 m • Double-sided uprights approx. 3500mm high, hot-dip galvanized • Base and arm depth 1200 mm, each upright with 3 height-adjustable cantilever arms • Load capacity at load center 600mm: 500kg per arm / 2250kg per upright side • With longitudinal and diagonal bracing, bay spacing (e) = 1300mm, standard is 1.30m • Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m • From 1.50m bay length upwards, a small surcharge applies to the quoted price • Special sizes (other bay spacings) are available on request, but incur an additional cost and have a longer delivery time as they must be custom manufactured Gedpfx Acjddmtceueuh • Unless otherwise specified, the racking will be supplied with a bay spacing of 1.30m • With 4 upright frames (3 bays), the total length is approx. 4m • Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Gamybos metai: 2021, Sąlyga: naujas, 1 racking unit with 4 uprights: €2,120 (net, ex VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, ex VAT)! Of course, you can also create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the upright spacings); the example given with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Single-sided rack uprights, approx. 3,500 mm high, hot-dip galvanized Base and arm depth: 1,200 mm with 3 height-adjustable arms each Load capacity at load center 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg total load With longitudinal and diagonal bracing, spacing = 1,300 mm (standard is 1.30 m). Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50 m upwards, a small surcharge will apply to the listed price. Special dimensions (other upright spacings) are also available upon request, incurring additional costs and longer delivery times as they are custom-fabricated. Guedpfxjddmqns Acujh If you do not specify a different upright spacing, we will deliver the rack with a spacing of 1.30 m. For this configuration, a single rack row with 4 uprights (3 sections) is approximately 4m long. Supplied with all bolts and nuts (shipped within Germany via parcel service directly from Würth), floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available – please contact us!

Gamybos metai: 2021, Sąlyga: naujas, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW – : Price ex stock incl. loading! 1 racking unit with 4 uprights €3,875 (net)! Shipping within Germany (excluding islands): €550 (net)! Of course, you can build longer or shorter racking units by omitting or purchasing additional frames (or by adjusting the bay width), the example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms of 1.20 m, 500 kg load capacity per arm Guedpeddmq Tefx Acush with bracing approx. 1.30 m Double-sided uprights approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity at load center of 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, bay width = 1,300mm. Standard is 1.30m. Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m! For bay widths from 1.50m, a small surcharge applies to the stated price! Special dimensions (other bay widths) are also available on request, subject to surcharge and longer delivery times as these are made to order! If you do not specify a different bay width, we will supply the rack with a bay width of 1.30m. In this case, the length of one row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, types of arms, etc.) available on request! Please contact us! Photos show a similar rack!

Sąlyga: naudotas, Gamybos metai: 2003, Svoris be krovinio: 200 kg Tipas numeris: 920-12 Kinshofer KM920-12 Godjxh S I Topfx Acuouh Naudotas konteinerio ištuštinimo įrenginys KM920-12 Kinshofer OEM: 920-12 Prekės nr.: H300501001-veiling Naudotas konteinerių ištuštintojas KM920-12 Kinshofer

Sąlyga: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Gsdpfx Acsd Ab Hheusuh Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut design NC preset control ELGO P 40 T Touch with backgauge and blade gap adjustment from the front via the control panel Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and re-sharpening Adjustable cutting length for efficient processing Lower blade with 4 usable edges Upper blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE standards

Sąlyga: naujas, Gamybos metai: 2022, Svoris be krovinio: 5 kg Tipas numeris: 51231 Nuotolinio valdymo pultas Fassi autokrautuvui Scanreco 51231 NAUJAS - NENAUDOTAS TIK NUOTOLINIS VALDYMAS - BE IMTUVIO OEM: 51231 Gujdpfx Acexh R Ewoush Prekės nr.: H300369032N-aukcionas Nuotoliniu būdu valdomas Fassi autokrautuvas Scanreco

Sąlyga: naujas, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Gusdpfx Ajd Ab Hiocueh Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Equipment: Swing beam shear design NC-preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control unit Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Footswitch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers 1,000 mm foldable finger guard 1 T-slot side gauge 2 sheet support arms with T-slots Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade can be rotated four times Upper blade can be rotated twice Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Sąlyga: naujas, Sheet length: 3,200 mm Sheet thickness: 10.0 mm Total power requirement: 11 kW Approximate weight: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm — Technical Specifications: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg — Equipment: Swing-cut design NC pre-selection control ELGO P 40 T Touch Guodpfxjd Ab Hne Acujh with backgauge and cutting gap adjustment from the front via the control panel motorized backgauge up to 1,000 mm clear operator panel mounted on swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable 1,000 mm finger guard 1 lateral stop with T-slot 2 sheet support arms with T-slot easy blade replacement and regrinding adjustable cutting length for efficient processing lower blade usable on four sides upper blade reversible once qualified after-sales service OPERATING MANUAL IN ENGLISH Machine and equipment comply with CE regulations

Sąlyga: geras (naudotas), Gamybos metai: 1996, Offer 25115 Gsdjwn D Emspfx Acusuh Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm - Mitre adjustable on 2 axes - Table size approx.: W 800 x D 800 mm - Table height: 920 mm - Drive: 400 V / 1.5 kW - Required space approx.: W 800 x H 1900 x D 1100 mm - Weight approx.: 200 kg

Sąlyga: paruoštas naudoti (naudotas), With wrapping arm and control cabinet. Guodpfx Acsh D H Hvoujh

Sąlyga: naudotas, Electric chain hoist crane DEMAG type PM 12LF Manulift Gedpfx Aohwn Tqscueuh Electric crane with single-hand operation Serial no. 5877813 Year of manufacture: 1990 Load capacity: 125 kg Hook travel: 3.5 meters Lifting speed: 12 m/min Creeping speed: 2 m/min Motor power: 0.32 / 0.05 kW Power supply: 400 Volt, 50 Hz 1 load chain strand = 125 kg Manulift hand control directly on the crane hook Good condition

Sąlyga: geras (naudotas), Renault 270 DCI crane truck, 19 tonnes. Year: 2002. 470,000 km. Engine replacement performed at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: OK. No remote control for the crane. Gusdpfx Acerhzy Houjh

Sąlyga: geras (naudotas), Bosch Turbo Scara SR8 pasukamas roboto manipuliatorius Gamintojas: Bosch Užsakymo Nr.: 3842999836 Serijos Nr.: 3810333 Guodpfxjg D Tu Is Acuoh Eiga * Pinolis 400*25 Didž. darbinis slėgis: 8 bar Didž. apkrova: 8 kg Svoris: 51 kg Sūkių diapazonas – žiūrėti nuotrauką Sumontuota ant aliuminio profilio pagrindo rėmo. Prekės būklė: naudota Visi robotai buvo laikomi sandėlyje kaip atsarginiai įrenginiai didelėje automobilių dalių gamykloje, todėl yra labai geros būklės. Be maždaug 50 paternosterio tipo sandėliavimo sistemų, galima įsigyti daugybę kitų įrengimų, tokių kaip presai, robotai, krosnys, pramoniniai dulkių siurbliai ir kt. Dirbtuvių įranga, darbo stalai, dirbtuvių vežimėliai, įrankiai, krautuvai ir lentynos – gausiai. Iš viso bus demontuota ir parduota 24 000 m² gamybos plotų. Taip pat peržiūrėkite kitus mūsų pasiūlymus. Po pirkimo suma turi būti apmokėta per 7 darbo dienas. Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina pagal užklausą!

Sąlyga: labai geros būklės (naudotas), - Matmenys: 1050x1300x1500 mm Gjdpjwxvkpofx Acueuh - Miltų talpa: 120 kg - Serijos nr.: 21650 - Įtampa: 400 V

Sąlyga: naujas, Sheet length: 3100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Approximate weight: 7000 kg Dimensions (LxWxH): 4110 x 2195 x 1770 mm Our strong brand, KKKletzer CNC GUILLOTINE SHEAR swing beam type, Model SWT, provides everything you need for precise cutting. Even in the swing beam design, we have raised the standard and now supply our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control, without extra charge. NC link-guided guillotine shear KKI Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cutting length: 3,100 mm Cutting angle: 1.5° Number of hold-downs: 15 Backgauge: 1,000 mm via CNC Motor power: 11 kW Godod Eqrnepfx Acueuh Strokes per minute: 16 Throat depth: 50 mm Oil tank: 200 liters Length: 4,110 mm Width: 2,195 mm Height: 1,770 mm Weight: 7,000 kg • Stable swing beam construction • Blade gap adjustment via control system - Backgauge - Blade gap - Cutting length • Ball screw drive for backgauge • Ball transfers in the table • Side gauge 1,500 mm • 2 support arms 1,000 mm each • Cutting line illumination • 1,000 mm foldable finger guard Option: • Pneumatic sheet support, EURO 3,900.-- We have many references!

Sąlyga: naujas, Centauro BETA 3-Achs CNC Schwenkmeißel- Stemmmaschine Neue, voll programmierbare, horizontal arbeitende 3-Achs CNC-Schwenkmeißel-Stemmmaschine, geeignet für allgemeine Tischlereianwendungen und die Möbelproduktion. Durch die automatische Bewegung des Stemmkopfes in der X-Achse und einen automatischen Greifer zur Positionierung des Werkstücks ist kein manuelles Verschieben oder Handling erforderlich, abgesehen vom Einlegen des Holzes, dem Andrücken an den pneumatischen Referenzanschlag und dem Entladen nach abgeschlossenem Bearbeitungszyklus. Der gesamte Bewegungs-, Spann- und Stemmzyklus läuft vollautomatisch ab. Die Bewegungen in X-, Y- und Z-Achse erfolgen präzise über Kugelumlaufspindeln und Linearführungen für maximale Positioniergenauigkeit. Dank programmierbarer Z-Achse sind auch seitliche Zapfenlöcher, Doppelzapfen oder breitere Zapfenlöcher mit demselben Meißel möglich. Die Programmierung gestaltet sich sehr einfach über den benutzerfreundlichen grafischen Touchscreen-Controller, auf dem Programme unter einer Zahl oder einem Namen (bis zu 8 Zeichen) gespeichert werden können. Der Schwenkmeißel erzeugt sehr saubere Zapfenlöcher; für tiefe Zapfen können bis zu 3 Schnittiefen als „Woodpecker“-Funktion programmiert werden. Weitere Programmoptionen: Bezug auf Sichtfläche oder Werkstückdicke, Anfertigung von spiegelbildlichen Teilen (links/rechts) innerhalb eines Programms. Optional kann die Maschine mit einem separaten, programmierbaren Langloch-Bohrkopf zum Anfertigen kleiner Öffnungen für Sprossen ausgestattet werden. Alternativ ist ein horizontaler Fräskopf für Bandtaschen, Schlitze bei Jalousietüren usw. erhältlich. X-Achse Verfahrweg: 1100 mm Y-Achse Verfahrweg: 250 mm, max. Schnitttiefe: 120 mm (abhängig vom Meißel) Z-Achse Verfahrweg: 100 mm, max. Werkstückhöhe: 120 mm Alle Achsen über Kugelumlaufspindel und brushless Motor Max. Werkstückbreite: 200 mm (größer auf Anfrage) Max. Schwenkmeißel-Breite: 20 mm Min. Schlitzlänge: ca. 25 mm (mit Schwenkmeißel) Min. Schlitzbreite: 6 mm 3 vertikale pneumatische Spannzylinder 3 horizontale pneumatische Spannzylinder Gedpjb Tmpqjfx Acueuh 4 PS Hauptmotor „Power 1000“-Touchscreen-Grafiksteuerung mit 99 Programmen à 50 Zeilen; USB-Schnittstelle Programmierbare Schnittgeschwindigkeit für die Schnitttiefe Ausreißschutz mit Druckluftblasen und Absauganschlüssen (1 x 80 mm, 1 x 60 mm) Arbeitstisch-Maße: 1210 mm x 215 mm Installierte Leistung: 3,6 kW (Standardmodell) Druckluftversorgung: 6 bar / 470 l/min Verbrauch

Sąlyga: naudotas, - Matmenys: 1420x1360x1390 mm - Miltų talpa: 75 kg - Tešlos talpa: 120 kg - Vandens įsiurbimas: 45 L - Modelis: PX25 - Automatiniai valdikliai Gujdpfewxvkvex Acuoh - 2 greičiai - Galia: 5,15 kW - Įtampa: 380 V - Svoris: 400 kg