Ratu Balansavimo Stakles pirkti naudotą (55 951)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Vertical machining center Working range on X-axis: 3200 mm Working range on Y-axis: 1250 mm Working range on Z-axis: 60 mm Electrospindle and tool units: 6.5 kW electrospindle with HSK-F interface and C coupling axis HSK F63 unit for saw blade with maximum diameter 140 mm Manually adjustable/tiltable HSK F63 unit for milling or sawing 8-position tool magazine Lower drilling unit BH21: The processing unit consists of: 13 independent vertical spindles 4 independent horizontal spindles, positioned in the X and Y directions, including: 3 spindles in X direction (2 double-output units) 1 spindle in Y direction (1 double-output unit) Upper drilling unit BH23: The processing unit consists of: 14 independent vertical spindles 4 independent horizontal spindles positioned in the X and Y directions, including: 3 spindles in X direction (2 double-output units) 1 spindle in Y direction (1 double-output unit) 1 grooving saw unit, 120 mm diameter, fixed working direction in X Ffedpfxsydpg To Ahwew bSolid software Perimeter safety guarding and safety mat Panel referencing system Machine frame Panel handling unit Worktable Safety devices Electrical and electronic cabinet Transformer and electronic power supply Electrical cabinet air conditioning system Manual QR code laser reader Pre-arrangement for panel unloading unit Side transfer unit L = 2200 mm for panel return to operator Panel discharge conveyor Machine weight: 2500 kg Machines in excellent condition.

Būklė: naudotas, Gamybos metai: 2008, Ratų skersmuo - maks. 300 mm Fedovxww Sspfx Ahwsfw Modulis - maks. 8 Modulis - min. 0,7 Valdymas SINUMERIK 840 D Dalinio kūgio kampas - min./maks. -90 / +90 ° Rušinio velenas - griovelio skersmuo 127 mm Šlifavimo disko skersmuo 50 - 230 mm Šlifavimo veleno apsukos be pakopų 7.500 aps./min Bendra galia 146 kW Rušinio veleno apsukos 700 aps./min Staklių svoris apie 21 t Užimamas plotas apie 9,5 x 3,6 x 3,1 m Dantų tarpo matavimo jutiklis (integruotas į šlifavimo galvą) Išorinės šlifavimo veleno aušinimo sistema Alyvos rūko ištraukimas ELBARON (integruota staklėse) Hoffmann aušinimo skysčio filtravimo sistema Naudota spiralinių kūginių dantračių serijinei gamybai Nėra tvirtinimo priemonių Nėra šlifavimo diskų / šlifavimo diskų flanšų Nėra dresavimo diskų

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over bed slide: 250 mm Maximum workpiece diameter over bed guideways: 500 mm Workpiece spindle bore: 102 mm Tailstock quill stroke: 100 mm Main motor: 4.0 kW Cross axis feed motor (x): 4.3 kW Longitudinal axis feed motor (z): 3.8 kW Electrical equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Ffodpfx Ahow Hquxowjw Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Milling spindle taper: Morse 3 • Maximum module for gear hobbing: Module 3 • Smallest to largest number of teeth in gear hobbing: 4–50 Options: • Gear hobbing attachment ApFW Gear hobbing for parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Milling spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Gear hobbing for parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Milling spindle taper: Morse 4

Būklė: naudotas, Gamybos metai: 2007, Siemens Sinumerik 840 D CNC Control Weight 57,000 kg Operating Voltage 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For hobbing cylindrical and worm gears as well as all other hob-capable profiles and shapes regularly occurring on cylindrical workpiece surfaces. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing operations on cylindrical gears for numerous industries: wind power plants, industrial gear units, mining and shipbuilding, gear manufacturing, and more. The machine's drive power range is designed to accommodate future tool developments. The gear hobbing head drive is, of course, backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped with the corresponding chip conveyor for both operating modes. The machine is fitted with an internal profile milling head as a motor-driven milling head. --> Working Range and Technical Data Workpiece nominal diameter: 2,400 mm Maximum hobbed diameter approx.: 2,800 mm Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (custom version): 1,300 mm --> Maximum Clamping Capacity for Cutter (Internal Milling Head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Swivel range of internal profile milling head / vertical axis: +/- 15° Cutter arbor taper: HSK-B160 Maximum cutter shifting travel: 300 mm Table diameter: 2,500 mm Indexing gear diameter: 2,200 mm --> Table Bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg --> Max. Feed and Rapid Traverse Rates: Fsdpfswzyp Iox Ahwofw Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min --> Cutter Coolant System/Electrocentrifugal Pump: approx. 150 l/min Discharge height, magnetic chip conveyor raised: 1,600 mm Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motor-driven milling head in place of standard motor-driven head --> Max. profile depth machinable in steel (approx. 600 N/mm² tensile strength): approx. 65 mm Cutter speed infinitely variable: 50 - 150 rpm Max. cutter diameter: 440 mm Min. cutter root diameter: 310 mm Max. cutter width: 90 mm Min. internal diameter at 0° helix angle: 800 mm+ Max. workpiece height at 0° helix angle: 600 mm Max. workpiece ring thickness (incl. clamping device): 500 mm

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Fjdpfeul Etdex Ahwjfw Total connected load 62 kW Machine weight approx. 12 t Required space approx. 4.7 x 4.4 x 2.45 m DESCRIPTION Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Workpiece diameter – max. 275 mm Gear width max. 5.5 mm Helix angle 0–60° Number of teeth 5–120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Total connected load 62 kVA Machine weight approx. 12 t Required space approx. 4.7 x 4.387 x 2.45 m Tool Spindle (D-axis) - Workpiece spindle speed (infinitely variable) 60 to 350 rpm Tool Positioning Axis (E-axis) - Swivel range 0 to 360° - Max. swivel speed 19.5°/s Workpiece Spindle (B-axis) - External taper acceptance diameter (1:4) 140 mm - Standard internal taper (1:20) 99.218 mm - Max. workpiece spindle speed 300 rpm - Workpiece spindle bore 90 mm Workpiece Positioning Axis (Y-axis) - Travel 870 mm - Max. travel speed 4.5 m/min Indexing Rotary Axis (A-axis) - Swivel range 315° - Max. swivel speed 40°/s Axis Offset (Z-axis) - Travel range max. +/- 50 mm - Max. travel speed 0.657 m/min Workpiece Swivel Axis (C-axis) - Swivel range -8.5 to 98° - Max. swivel speed 21.5°/s Milling Depth Axis (X-axis) - Travel -25 to 640 mm - Max. travel speed 6 m/min Machine Distance (V-axis) - Travel 150 mm - Max. travel speed 1.6 m/min

Būklė: naudotas, Gamybos metai: 2007, Valdymas Siemens 840D Ffodpfx Ahjwzypujwjw

Būklė: naudotas, Gamybos metai: 2008, Valdymas Siemens 840D Fjdpfowzypnsx Ahwofw

Būklė: naudotas, Gamybos metai: 2002, Maximum diameter of ring gear: 500 mm Distance ring gear spindle – pinion spindle: 150 – 350 mm Distance pinion spindle – front of ring gear spindle: 120 – 340 mm Control: GE FANUC Series 160i-M Hypoid adjustment X-axis: +/- 70 mm Pinion spindle speed max.: 0 – 3,000 rpm Ring gear spindle speed max.: 0 – 2,600 rpm Internal taper pinion spindle: Ø 99.2 mm Internal taper ring gear spindle: Ø 99.2 mm Rated current: 30 A Machine weight: approx. 6.40 t Space requirement: approx. 2.40 x 2.20 x 2.10 m Built-in lapping compound system Additionally operated via a central lapping compound supply Ffjdpovxwpujfx Ahwew

Būklė: naudotas, Gamybos metai: 2008, Maximum transmission ratio 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height 20 mm Max. tooth width 58 mm Grinding spindle speeds stepless up to 6,000 rpm Workpiece spindle speed 1,200 rpm Max. tool diameter 230 mm Min. tool diameter 69.85 mm X-axis 325 mm Y-axis 350 mm Z-axis 470 mm B-axis +90.1 / -1° Workpiece table - Ø 212.71 mm Control system: SIEMENS SIN 840 D Total power requirement 75 kW Machine weight approx. 10,000 kg Space requirement approx. 6.10 x 4.40 x 3.30 m Internal measuring probe Renishaw LP2 (axes X2; Y2) Hoffmann coolant filter system HSF 100SE/K (year 2008) Tank capacity 2,500 L Fedpjvxwmtefx Ahwefw VT oil mist extraction system

Būklė: naujas, Gamybos metai: 2026, CNC valdomas gręžimo ir furnitūros montavimo automatas su žurnalu automatiniam puodelinių lankstų ir montavimo plokštelių apdorojimui. Mūsų automatiniai CNC valdomi gręžimo ir montavimo automatai pasižymi tvirtumu, ilgaamžiškumu ir paprastu valdymu. Trumpas pristatymas: • CNC valdomas puodelinių lankstų gręžimo ir įspaudimo automatas dideliam našumui • Lankstumas dėl CNC valdymo • Tvirti ir patvarūs GANNOMAT gręžimo agregatai • Plieninė įspaudimo matrica ilgam tarnavimo laikui • Masinės medienos gręžimas su standartiniu 1,5 kW varikliu • Saugos valdymas su metalo detektoriumi (pasirinktinai) Ffedpfx Aodx A U Hehwew

Būklė: naujas, Gamybos metai: 2026, Gręžimo ir furnitūros montavimo automatas su žurnalu, skirtas automatiniam puodelio lankstų ir tvirtinimo plokštelių apdirbimui. Mūsų automatiniai gręžimo ir montavimo įrenginiai pasižymi tvirtumu, ilgaamžiškumu ir paprastu valdymu. Trumpa pristatymas: • Didelės talpos lankstų gręžimo ir prispaudimo automatas • Masyvios ir tvirtos gręžimo galvutės • Plieninė prispaudimo matrica ilgam tarnavimo laikui Ffedpfx Ahodx A U Dswow • Kieto medžio gręžimas su standartiniu 1,5 kW varikliu • Saugumo valdymas su metalo detektoriumi (pasirinktinai)

Būklė: naujas, Gamybos metai: 2026, Gręžimo ir furnitūros montavimo automatas su žurnalu automatiniam puodelinių lankstų ir montavimo plokštelių apdirbimui. Mūsų automatiniai gręžimo ir montavimo automatai pasižymi tvirtumu, ilgaamžiškumu bei lengvu valdymu. Trumpas pristatymas: • Aukštos našumo puodelinių lankstų gręžimo ir įspaudimo automatas • Tvirtos ir masyvios gręžimo galvutės • Plieninė įspaudimo matrica ilgam tarnavimo laikui Fsdpfxjdx A Uro Ahwsfw • Masivaus medžio gręžimas su standartiniu 1,5 kW varikliu • Saugos valdymas su metalo detektoriumi (pasirinktinai)

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, stalo skersmuo: 132 mm, ratlankio skersmuo: 130 mm, veleno greitis (maks.): 3 500 aps./min, įrankio skersmuo: 80 mm, A ašies pasukimo kampas (min.): −40 °, A ašies pasukimo kampas (maks.): 40 °, Gear Hobbing Machine - Vertical SAMPUTENSILI S130 CNC Module Well-maintained CNC vertical gear hobbing machine for shafts and gears, equipped with tailstock. Suitable for hard hobbing (ideal for steering pinions). TECHNICAL DETAILS Control type: CNC Control system: Sinumeric 840C Max. gear diameter: 130 mm Max. module: 3 Total power requirement: 15 kW Machine weight: approx. 6 t Space requirements: approx. 2.3 m x 2.5 m x 2.17 m Rapid traverse, radial/axial: 10,000 mm/min Rapid traverse, tangential: 7,500 mm/min Ffsdpfx Aswmb Nyehwew Max. gear diameter: 130 mm Max. module: 3 mm Tangential slide travel: 200 mm Radial slide travel: 10/100 mm Axial slide travel: 300/200 mm Milling head speed: 250–3,500 rpm Milling head: swivels up to ±40° Tool diameter: 80 mm Tool length: max. 240 mm Table speed: 5–1,000 rpm Milling spindle drive: 15 kW Feed range: 0.1–2,000 mm/min Table diameter: 132 mm MACHINE DETAILS Control: Sinumerik 840 C Connected load: 40 kVA Motor power: 15 kW Weight: 6 t Dimensions: 2,300 x 2,500 x 2,170 mm EQUIPMENT - Hydraulic workpiece clamping - Automatic loading system - Magnetic chip conveyor

Būklė: geras (naudotas), Gamybos metai: 1978, Pitch circle diameter max: 152 mm Number of teeth: 8-50 pcs Weight: 7,500 kg Technical Specifications – Min./max. root cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finish cutter head: 10.7 mm – Max. tooth width at the root with 21°: 28 mm – Cutter head diameter: 200 mm – Tooth number range: 8–50 – Max. cutter head diameter: 0.21" Workpiece Spindle – Diameter of taper bore at large end: 99.219 mm – Clamping length on 304.8 mm length: 15.478 mm – Taper depth: 15.875 mm – Total spindle bore diameter: 22.225 mm The GLEASON 726 REVACYCLE bevel gear cutting machine manufactures workpieces with the highest precision and accuracy. The root angle range is 15° to 55°, and the bevel gear is processed at a high speed of 49.7 m/min. The GLEASON NO 726 machine weighs approximately 9 tons. Technical Specifications of the GLEASON 726 REVACYCLE Bevel Gear Cutting Machine Maximum tooth height: 14.8 mm Maximum tooth width at root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Cutter head speed: 32.6-49.7 m/min Feed rates (seconds per tooth): 2-3.1 Indexing range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Counterbore behind taper: 57.2 x 77.9 mm Spindle through bore diameter: 22.3 mm Main drive motor power: 10 HP Main drive motor speed (60 Hz/50 Hz): 1800/1500 rpm Hydraulic motor speed (60 Hz/50 Hz): 1800/1500 rpm Coolant pump speed (60 Hz/50 Hz): 3600/3000 rpm Chip conveyor motor speed (60 Hz/50 Hz): 1800/1500 rpm Space requirement (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t Fedpfx Ajxq Hgcehwjfw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 291127, ratlankio skersmuo: 275 mm, ratlankio plotis: 55 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 840 C, Face Milling – Single Part Process – Continuous Operation: - Workpiece and tool (typically Spiron) rotate simultaneously; all teeth are produced in a single pass. - Cutter head features several tool groups (not arranged in a circle). - Teeth have parallel heights. - Tapered tooth head surface. Single Part Method: - The workpiece remains stationary while the tool (typically Arcon) rotates and cuts one tooth by plunging into the material. - After one tooth is cut, the tool retracts, the workpiece indexes by one tooth width, and the next tooth is cut. This process is repeated until all teeth are machined. - The cutter head has all tools positioned along a circular path. - Tapered tooth height. - Parallel tooth head surface. The C28 can perform both gear and pinion machining. For single part operation, the C28 must be "prepared"—i.e., equipped with a direct measuring system, workpiece axis part transmission brake, and a license file for single part production. TECHNICAL DETAILS Control: Siemens 840 C Gear diameter: max. 275 mm Gear width: 55 mm Module: 1.5 - 6.5 Spiral angle: 0-60° Number of teeth: 6-120 mm Transmission ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of cutter groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2,400 rpm Transmission X / Y / Z: 3:1 Leadscrew pitch per axis: 10 mm Movement range E / V axis: -5° to 95° / ±7.5° Motor speed E/V axis: 400 / 900 rpm Travel E/V axis: 1,800 / 1,098 °/min Transmission E/V axis: 80:1 / 1:1 Mounting diameter A/B axis: 130 / 140 mm Spindle speed A/B axis: 667 / 345 rpm Permissible motor speed A/B axis: 10,000 / 4,500 rpm Transmission A/B axis: 15:1 / 13:1 Travel V1 axis: 85 - 225 mm Fodpfov I Ud Iex Ahwofw Travel speed V1 axis: 6 m/min Motor speed V1 axis: 1,800 rpm Leadscrew pitch V1 axis: 5 mm Travel U axis: 112 - 258 mm Travel speed U axis: 0.6 m/min Transmission U axis: 4.3:1 Motor speed U axis: 3,000 rpm Leadscrew pitch U axis: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 m Power supply: 3x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Būklė: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1 Control system 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m Ffjdpfjtumrpsx Ahwew

Gamybos metai: 1960, būklė: naudotas, max. pulling force: 20,000 kg max. lift: 1,250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min Ffodpsui Sbefx Ahwow max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine features an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the pull bridge, as well as in the tool feeder, operates via spring mechanism (pull head DIN 1417).

Gamybos metai: 1980, būklė: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t Fedpfx Ascdtpljhwefw automatic tool feeder hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter magnetic strip chip conveyor

Gamybos metai: 1959, būklė: naudotas, max. Zugkraft: 16 t max. Hub: 1250 mm Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min Fjdpfx Ahs Rwa Uewsfw

Gamybos metai: 1956, būklė: naudotas, mašinos/transporto priemonės numeris: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine No.: 1413 General information / Technical data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition Pulling force: 13,000 kg (maximum) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Clamping diameter of pull head: Ø 85 mm Passage width between cylinders: max. 390 mm Cutting speed: hydraulically and steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically and steplessly adjustable from 7 m/min to max. 25 m/min Fedpfedbmgmjx Ahwofw Machine dimensions (W x D x H): approx. 1150 x 1500 x 3725 mm (tool feeder extended) Power supply / Connected load: 380 Volt 50Hz / 7.5 kW Accessories / Special equipment: The traverse of the machine is equipped with 3 broaching tool holders, while the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for a spring-actuated locking mechanism (DIN 1415). The machine is fitted with an automatic tool feeder; the available feeder mount is suitable for just one tool (center broaching station). The machine is equipped with an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production with medium batch sizes. The machine features an automatic cycle. For operation, ideally a machine pit or alternatively a pedestal is required. Pull heads, tool holders & tools are available upon request. The machine can be inspected under power at our warehouse.

Gamybos metai: 1951, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Fedpfxjdcdrps Ahwsfw Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: Fsdpfodffzfjx Ahwofw The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Remarks: The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1962, būklė: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Ffsdpjdl Uzkofx Ahwsw Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Gamybos metai: 1958, būklė: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Ffededa Ugijpfx Ahwjw Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Fsdpfx Aecc D Ddohwjfw Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.