Krumpliaračių bandymo staklės

HÖFLER EMZ 631

Būklė: naudotas, Gamybos metai: 2008, Ratų skersmuo - maks. 700 mm Modulis - maks. 10 (18) Modulis - min. 1 Stalo skersmuo 530 mm Stalo apsukos maks. 350 1/min Todpfxeyv Ipfs Aa Dja Ašių atstumas 50 - 680 mm Ruoinio svoris 4 000 kg Ašinė eiga 1 000 mm Tangentinė reguliacija 300 mm Pasukimo kampas maks. +/- 45 laipsnių Variklio galia 32 kW Veleno apsukos 3 500 - 12 000 aps./min Įrankio skersmuo 320 mm Bendras galios poreikis 80 kW Mašinos svoris apie 25,00 t

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 3 kg, padavimo ilgis X ašis: 100 mm, padavimo eiga Y ašimi: 100 mm, padavimo ilgis Z ašis: 200 mm, ruošinio skersmuo (maks.): 180 mm, frezavimo ilgis: 200 mm, bendras svoris: 5 000 kg, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 400 aps./min, įrankio skersmuo: 80 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Ši mašina yra visiškai išardoma ir iš naujo surenkama nuo pagrindų. Kapitalinio remonto metu ji iš esmės modernizuojama, naudojant naujausias aukštos kokybės komponentes ir moderniausias technologijas. Po atnaujinimo mašina techniškai ir vizualiai atitinka naujos būklę – patikima, našiai veikianti ir pasirengusi ateities iššūkiams. Tsdpfex Af A Hjx Aa Dsa Komplektacija ir konfigūracija gali būti pilnai pritaikytos pagal jūsų individualius gamybos poreikius – kad užtikrintų maksimalų produktyvumą jūsų įmonėje.

Būklė: naudotas, TECHNINIAI DUOMENYS - Didžiausias krumpliaračių frezavimo modulis: 1,5 [mm] - Didžiausias krumpliaračių frezavimo skersmuo: 70 [mm] Todjuhbpljpfx Aa Dea - Didžiausias krumpliaračių frezavimo ilgis: 100 [mm] - Didžiausias ruošinio ilgis: 200 [mm] - Mažiausias dantų skaičius krumpliaračių frezavimui: 3 - Sraigtinio veleno sriegių skaičius (speciali įranga): 1 - Spiralės kampas: 0–90 [°] - Didžiausias frezavimo įrankio skersmuo: 50 [mm] - 11 standartinių frezavimo įrankio greičių - Standartinis staklių greitis: 226–2100 [aps./min.] - Galia: 1,5 [kW] - Grynasis svoris: 1035 [kg]. PRIEDAI - Su ruošinių padavėju

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 120 mm, W ašies eiga: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent partial refurbishment in 2024 at a cost of €15,000. The machine features six high-quality grinding spindles, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 slots, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speed and Tooling Speed 22S: 4,500 – 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 – 45,000 rpm 80S: F6 Speed 80S: 40,000 – 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Groove grinding attachment: 2,900 – 34,500 rpm Planetary motion: 5 – 250 rpm C-axis: 0 – 5 rpm Feed X/Y: 0 – 1,200 mm/min Feed W-axis: 900 mm/min Feed Z-axis: 0.5 – 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Floor space required: 3.5 x 4.4 m Machine height: 3.5 m Connected load: 8.3 kVA Weight: 3.1 t EQUIPMENT Todpfxowtqtho Aa Doa - Groove grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - High-quality accessories included Transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Viewings by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net weight of machine: 5500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Between centres: 650 mm LONGITUDINAL SLIDE (Z) Max travel: 800 mm Feed rate: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X) Max travel: 254 mm / SPW 650 Feed rate: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum workpiece weight (between centres): 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL GRINDING WHEEL HEADSTOCK Left wheel dimensions: 500 x 80 x 203 mm Right wheel dimensions: 400 x 80 x 203 mm Grinding wheel headstock power: 12.5 kW Rotational speed: 3,200 rpm Programmable cutting speed up to: 50 m/s B-axis stroke: -15° to +195° B-axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Tedpfx Aaezbaz As Dea Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Unless stated otherwise, the technical data provided are not binding and subject to errors or omissions. Stock no. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Fully overhauled: Mechanical, geometry, hydraulics, and electrical parts (checked and/or replaced) Grinding wheel headstock: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjusted. New paintwork. Workhead: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. New paintwork. Tailstock: Disassembled, checked and overhauled Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic manifold checked. X-axis: Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables ground. Z-axis: Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, new paintwork. Electrical cabinet: Fully checked, various relays replaced. Paintwork: Colours: White RAL 9003 and grey RAL 7011 Geometry adjusted according to manufacturer protocol. Various accessories checked and cleaned.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Tjdpfovibc Hox Aa Doa Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Būklė: naujas, Eifco gear hobbing machines product range Tsdpfsu Egdlex Aa Dsa

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Todpjvz Ec Iefx Aa Dea Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Swing diameter 400 mm O F F E R We can offer you, subject to prior sale and error, ex-stock and without obligation: WMW - GLAUCHAU Universal internal cylindrical grinding machine with face grinding attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Center height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Todpfx Aoxyllvja Dsa Workpiece headstock swivel range, max.: 30° Workpiece headstock cross movement, max.: 400 mm Grinding spindle slide longitudinal infeed: 70 mm Grinding spindle slide cross infeed, approx.: 100 mm Grinding head infeed, interval mode: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table travel, max.: 630 mm Table speed, steplessly variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle slide travel on table: 520 mm Grinding spindle drive power, approx.: 7.5 kW Total connected load: approx. 17 kW – 380 V – 50 Hz Weight, approx.: 6,000 kg Accessories / special equipment: • Universal internal grinding spindle unit with program-controlled cycles for grinding cylindrical and tapered bores with single or multiple diameters, external cylindrical grinding and narrow face grinding • Face grinding attachment, hydraulically swiveling, with automatic cycles for grinding single and multiple faces as well as stepped faces simultaneously • Electronic program control with large operator panel including ammeter for both grinding spindles • Belt-driven grinding spindle unit with built-in spindle and 5 separate, exchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at workpiece headstock • HEIDENHAIN digital readout for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw face plate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel arbors, foot switch • Separate hydraulic unit, attached control cabinet, coolant device with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net, after receipt of invoice

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1980, Gleason Hypoid cutter Sharpener 13A – 1 unit Milling diameter: 89–500 mm Grinding wheel dimensions: 305 × 19 × 102 mm Todpfx Aasr Elpvo Doa Feed: 0.05–0.18 mm Grinding wheel drive motor – 1800 rpm (60 Hz)      1500 rpm (50 Hz) Floor space: 1240 × 2310 mm Height: 1422 mm Machine weight: 4083 kg Gleason 19 revacicle cutter checking machine – 1 unit