Vertikalios krumpliaračių frezavimo staklės

LIEBHERR LC180

Būklė: naudotas, Gamybos metai: 2009, X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Control: SIEMENS SINUMERIK 840D Spindle speeds – infinitely variable: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axes: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° B-axis rapid traverse: 10.00 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – infinitely variable: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at face plate: 1,550 Nm Tool magazine: chain magazine, 60 places Tool diameter: 110 mm Tool diameter with 2 free adjacent positions: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total power consumption: 80.00 kW Machine weight approx.: 18.00 t Space requirement approx.: 7.50 x 5.50 x H3.50 m 5-axis machining center with SIEMENS Sinumerik 840D control, belt filtration system 980 l, chip conveyor, Gbsdsx Tiy Tjpfx Ac Dok through-spindle coolant, extraction system, BLUM tool measurement, touch probe, operation mode 4, tool holder cleaning, hydraulic clamping with proportional valve.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Gbsdpfx Acoxc E H So Dek Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feed/automation Available from 24.08.2024

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, bendras svoris: 35 000 kg, Форгиращ чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Gedpfx Aetgpdzoc Debk

Būklė: naudotas, Gamybos metai: 2007, X eiga 900 mm Y eiga 300 mm Z eiga 1000 mm Valdymas Siemens 840D Gbodewzypuspfx Ac Dok Didžiausias ruošinio skersmuo 1600 mm Didžiausias modulis 20 mm Skriemulio skersmuo 350 mm Staklių svoris apie 33.500 kg Užimamas plotas apie 10,53 x 6,38 x 4,68 m Techninės detalės: - X eiga: 900 mm - Y eiga: 300 mm - Z eiga: 1000 mm - Valdymas: Siemens Sinumerik 840D - Didžiausias ruošinio skersmuo: 1600 mm - Didžiausias modulis: 20 mm - Skriemulio skersmuo: 350 mm - Frezavimo veleno skersmuo: 375 mm - Bendra galia: 80 kVa - Staklių svoris apie: 33.500 kg - Užimamas plotas apie: 10,530 x 6,375 x 4,680 m Pjovimo greitis: - X ašis nuo 1 iki 3000 mm/min - Y ašis nuo 1 iki 3000 mm/min - Z ašis nuo 1 iki 4000 mm/min Verpstės apsukos 1/min: - Įrankis nuo 26 iki 265 - Ruošinio stalas nuo 0 iki 8 Įranga/Priedai: - Variklinė frezavimo galva M 2 - Frezavimo velenai - Alyvos šaldytuvas - Techninė dokumentacija

Gamybos metai: 1999, būklė: naudotas, Tractive force – max. 6.0 t Ram stroke – max. 1250 mm Gbjdpfx Acod Il A Nj Djk Space requirement approx. 1.20 x 1.20 x 3.25 m

Būklė: geras (naudotas), Gamybos metai: 2009, X ašies eiga: 1 120 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 36 000 m/min, greitas poslinkis Y ašis: 36 000 m/min, greitasis eiga Z ašyje: 36 000 m/min, stalo plotis: 510 mm, stalo ilgis: 1 460 mm, stalo apkrova: 800 kg, Renishaw MP-12 matavimo zondas IKZ 15 bar Sąsajos rinkinys Performabnce programinės įrangos paketas Monitoring B paruošta, neįtraukta X ašis: 1120 mm Y ašis: 510 mm Z ašis: 510 mm Stalo ilgis: 1460 mm Stalo plotis: 510 mm Stalo apkrova: 800 kg X ašies poslinkis: 36 000 mm/min Y ašies poslinkis: 36 000 mm/min Z ašies poslinkis: 36 000 mm/min Įrankio tvirtinimas: 40ISO/Bt/Mk Veleno galia: 18,5 kW Sūkiai: 12 000 aps/min Įrankių keitiklis: 30 IKZ: Taip Valdomų ašių skaičius: 3 Drožlių transporteris: Taip Aušinimo sistema: Taip Ilgis: 3300 mm Gbedpfew Rm Diox Ac Djk Plotis: 2850 mm Aukštis: 2800 mm Svoris: 6100 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 730 mm, Y ašies eiga: 730 mm, Z ašies eigos atstumas: 850 mm, ruošinio ilgis (maks.): 1 000 mm, ruošinio svoris (maks.): 500 kg, įrankių magazino lizdų skaičius: 120, valdiklių gamintojas: FANUC, bendras aukštis: 3 138 mm, bendras ilgis: 2 725 mm, bendras plotis: 4 610 mm, bendras svoris: 12 900 kg, valdiklio modelis: FS-31IA (MAPPS III), X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, veleno greitis (maks.): 14 000 aps./min, įrankio ilgis: 500 mm, ruošinio skersmuo (maks.): 800 mm, CNC Control: FS-31IA (MAPPS III) Axes Travel X-axis mm: 730 Travel Y-axis mm: 730 Travel Z-axis mm: 850 Rapid traverse m/min: 50 B-axis indexing degrees: 360º (1º increments) Distance spindle nose – table surface mm: 100 – 830 Axis acceleration m/s²: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Pallet dimensions mm: 500 x 500 Max. workpiece size (D x H) mm: 800 x 1000 Max. workpiece weight kg: 500 Pallet change time sec: 7 Spindle Max. spindle speed rpm: 14,000 Spindle drive power kW: 22/18.5 Tool holder: No. 40 Spindle torque Nm: 220 Tool system Tool holder type: BT-40 Number of tools in magazine: 120 With free adjacent pockets mm: 140 With filled adjacent pockets mm: 70 Max. tool length mm: 500 Max. tool weight kg: 12 Tool-to-tool change time s: 0.9 Gbodpfsvw Sc Tex Ac Dok Chip-to-chip time sec: 3.3 Equipment Chip conveyor Work area lighting CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity liters: 680 Machine operation time: Total power requirement kVA: 49 Base machine: Dimensions/Weight Length mm: 2,725 Width mm: 4,610 Height mm: 3,138 Weight kg: 12,900

Būklė: naudotas, Gamybos metai: 2013, Swing diameter . mm Turning length 2000 mm Control system: Siemens 840 D sl Main spindle: Max. speed 3800 rpm Main spindle: Max. torque 1200 Nm Quill diameter 140 mm Centre point: MK6 Quill force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the seller's facility. Gbjdpfx Aevu E R Ssc Dek It is in good condition, and the turning accuracy is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: Gbodpfxouxft Ej Ac Dsk -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2016, Technical details: Godjudf Evspfx Ac Dsbk Weight: 22 t