šlifavimo staklės/kalibratorius/

Viet rita 4 ct el

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Ppedpfxsxranpe Af Uer Max. clamp jaw opening: 90 mm Min. panel dimensions from the rear: 1,830 x 915 mm Max. panel dimensions from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of the scorer relative to main saw QUICK CHANGE: rapid blade change at the touch of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on the pusher with double fingers 3 front aligners 16 support roller rails behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement mechanism for table 2 Automatic ejection of end pieces beyond the cutting line Material support surface under pusher with brush-lined rollers, suitable for sensitive surfaces Machine table with air nozzles for delicate surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring the main spindle speed Software package: - QUICKOPTI for cutting pattern optimization directly at the machine - OSI PLUS INTERFACE VERSION - OPTIPLANNING optimization software incl. hardware dongle, permits management of up to 10 users via network - OS LABELLING: graphic editor in the machine control, including drawing of workpieces, real-time label printing at the machine possible - COMMUNICATION STORAGE FEED SYSTEM - SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotating suction frame 0 - 180 degrees equipped with controlled axis Panel alignment/squaring system consisting of 3 photoelectric cells mounted on pneumatic cylinders Panel weight detection via load cell installed on the suction frame in the separation area, checks whether the specified weight is within the expected range for this panel type. If not, the panel is set down again and the separation cycle is restarted. Roller conveyor for loading and unloading stacks 4,200 mm Software: LINE SUPERVISOR with storage mapping, catalog, import of processing data from the optimizer, management of parts lists, system control

Būklė: paruoštas naudoti (naudotas), Presă de debavurare Erfurt PKZe 500/1000 Forță 500 tone Pjdevbcxtspfx Af Uspr Dimensiunea mesei 1020x1420 mm Cursă 400 mm Număr curse/minut – 12 Motor principal 41 kW Video disponibil

Būklė: naujas, Bendras laiko nustatymas Dažnio greičio valdymas Automatinis iškrovimas Vakuumas 0–95 % Vakuumo sistemos filtras Tūris: 500 litrų Mašinos matmenys, cm: Pedpfjuu Rkaex Af Ujpr Ilgis: 178 Plotis: 102 Aukštis: 155 Elektros galia: 3 kW

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Ppsdpfevwbp Ajx Af Usr

Būklė: labai geros būklės (naudotas), Soundproof cabins. For Bruderer stamping presses. Cabins available from stock for the following machines: BST 25 BST 41 BSTA 50 The cabins are fully refurbished, carefully disassembled, and packaged for transport. Painted in white and anthracite (other colors upon customer request). Podpfsiw Icbjx Af Uepr The cabin comes with all necessary apertures for easy operation with a Bruderer press. Front and rear doors with inspection windows. Air ventilation unit for climate control mounted on the top cover. For further information, please do not hesitate to contact us. We also have in stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, as well as Mabu and Schaal stamping presses.

Gamybos metai: 2014, būklė: naudotas, PROLOGIC window construction software Pedpfx Aerci S Ssf Uepr FenOffice 14 Conturex

Būklė: geras (naudotas), BSTA 30 Stroke rate: 600 spm Feed: BBV Ppodeda Ha Njpfx Af Usr High-performance: 600 spm Max. pressing force: 300 kN Max. strip width: 190 mm Machine overhauled Good condition More high-speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50) as well as Schaal and Mabu presses.

Gamybos metai: 2009, būklė: geras (naudotas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 Ppodpfx Aopu Anmof Uor • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Main engine: 75 kw Capacity: 1000-1200 kg/h. Ring die/matrix: 8mm, new. Years 2001. Stainless steel cover. Manufactory: Radviliskis Machine factory-Lithuania. Ppsdpfox R Suzox Af Uer Model: OGM 1.5 Include: *extra new ring die for 8mm. *10pcs new roller shell. *10 pcs new bearing for roller.

Būklė: naudotas, Gamybos metai: 2016, Kaina: pagal užklausimą - Metai: 2016 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Maks. pjovimo ilgis [mm]: 1600 - Maks. pjovimo plotis [mm]: 4300 Ppsdpox R A Ufefx Af Ujr - Transportavimo paketai [vnt.]: 8 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Pristatymas ir įrenginių priėmimas įmanomi bet kuriuo metu iš bet kurios pramonės šakos Glenn Smeets