Randek pirkti naudotą (12)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, RANDEK forgó keresztvágó fűrész Bdsdsvryhgopfx Aa Dof

Būklė: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. - Mitre cuts from 0° to 360° Bodpoh Ayyqsfx Aa Dedf - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to change/errors excepted

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The Randek Cut-Out Saw JS400C is designed for making notches at the ends of wood pieces, for example, to accommodate a beam into upright studs. The machine fixes the timber pneumatically and makes two cuts using both 400mm diameter saw blades. The maximum cut length is 380 mm and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and simple via a foot pedal. Function Description The timber to be notched, e.g. a stud, is pushed into the covered saw slot up to the preset stop. The protruding end is supported on a roller stand (not included). Via the foot pedal, the timber is pneumatically clamped and the sawing process is activated. Technical Description • Notch depth: 30 - 115 mm • Notch length: 10 - 380 mm • Timber thickness: 30 - 70 mm • Power supply: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: Carbide-tipped 400/30-3.5/2.5/40 Safety The saw is securely shielded with a cover plate to prevent contact. Opening the cover automatically disconnects the power supply, minimizing the risk of injury. Advantages • Enables efficient and precise notching/cutting • Flexible and easy setup • Simple operation Bdsdpfx Aasd Arwhj Dof • The adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Būklė: naujas, Gamybos metai: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are carried out fully automatically by robots. The system is flexible and can be configured according to customer requirements. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated processes: - Panel handling. The panels are picked up from different stacks using vacuum suction and placed onto the timber frame construction as per the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels by screwing, stapling, and/or nailing. - Creation of cut-outs for electrical installations, windows, etc. - The system can process 1, 2, or 3 types of panels. Bjdpfoduub Uox Aa Dsdf - Component marking via inkjet printing. - Gluing. - Waste handling, e.g., gypsum board and OSB waste is deposited at defined locations or, if required, directly into the waste container. - Effective dust extraction. - Alignment of the component with the workstation table. - Alignment of studs before nailing, precise placement of nails/staples into the studs.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Darbo stalas su presavimo įrenginiu ir pakėlimo įranga Bodpfx Aasx Tdtne Dodf

Būklė: naudotas, Gamybos metai: 2015, Sienų gamybos linija, skirta sienų gamybai modulinei statybai. Naudota Švedijos gamintojo 2015–2021 m. PASTABA: Parduodama esamos būklės. Stoties ilgis: 7000 mm Stoties plotis: 2700 mm 1 stotis: Karkaso formavimo stotis su CAD/CAM (yra du viniavimo įrankiai) 2 stotis: Darbo stalas Bdodexv Arxspfx Aa Dof 3 stotis: Pusiau automatinė viniavimo tiltas (yra du viniavimo įrankiai) 4 stotis: Darbo stalas – vertikavimo stalas 5 stotis: Daugiafunkcis portalas su CAD/CAM (yra keturi varžtų įrankiai ir frezavimo blokas) 6 stotis: Darbo stotis – Priėmimo stalas – slankusis į šoną 7 stotis: Darbo stotis – Kampinis perdavimas 8 stotis: Darbo stotis – vertikavimo stalas 9 stotis: Darbo stotis – Kampinis perdavimas 10 stotis: Darbo stotis – vertikavimo stalas

Būklė: naudotas, Gamybos metai: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen ausgelegt und verwendet vier Nagelgeräte, die jeweils mit der gegenüberliegenden Seite korrespondieren. Das System umfasst vier Nagelaggregate, die die Nagelvorgänge gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch ausführen. Das Nagelportal ist auf einem bodenmontierten Schienensystem befestigt, das mit dem Betonboden verschraubt ist. Dadurch kann das Brücken-Nagelsystem je nach Bedarf zwischen den beiden Arbeitstischen verfahren werden. Das System ist mit Lichtschranken für Positionierung und Sicherheitsüberwachung ausgestattet. Funktion • Der schienengeführte Rahmen befindet sich in einer neutralen Ladeposition zwischen den beiden Arbeitstischen. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das ausgewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert, um den Nagelprozess gemäß dem gewählten Nagelbild durchzuführen. Bsdjykqxdopfx Aa Dsdf Arbeitstische: Die Arbeitstische sind mit Auflage-Nuten zur Positionierung der Holzständer versehen. Diese Nuten sind mittels Schiebemechanismen verstellbar, wodurch sich der Tisch an unterschiedliche Paneeltypen und -konfigurationen anpassen lässt. Funktion • Die äußeren Tischkanten werden manuell zur Paneelanlage hin eingestellt. • Die ausgewählten Latten werden manuell positioniert, um eine präzise Lage der Paneele zu gewährleisten. • Der Bediener bringt die zu montierenden Komponenten in die entsprechenden Nuten und an die Latten an. • Das brückengeführte Nagelsystem wird aktiviert, um das Nageln gemäß dem gewählten Muster durchzuführen.

Būklė: naujas, Randek Cross-Cut Saw SPL728 Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter sawing jobs directly. This minimizes disruptions to the production process. Saw Blade: Bjdofg Tatjpfx Aa Dedf Carbide-tipped, low-noise, 700 mm Ø / 116 teeth, 360° horizontal rotation, 90°–28° tilting, 250 mm plunge depth Motor power: 7.5 kW. Automatically closing, locked safety guard made of plastic. Infeed Table, optionally 4.0 / 5.8 / 8.2 / 10.6 m long Infeed roller, IRO4-120, driven. Transport rollers 76 mm Ø, roller length 400 mm, roller spacing C/C 500 mm. Rear stop 120 mm. Hold-down device, pneumatic, 2 units Feed direction configurable from left or right. Outfeed Table, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer-controlled roller conveyor type LX. Guide roller for outfeed, rollers 76 mm Ø, length 400 mm. Rear stop 120 mm. 2 computer-controlled longitudinal stops, driven by toothed belt. Stop 1 – designed for cut lengths up to 50 mm. Stop 2 – traverses the entire length of the outfeed table. Positioning of the longitudinal stops and adjustment of the cutting angles is done independently and computer-controlled. Maximum travel speed of the longitudinal stops: 1 m/s. Timber feed: 1 unit Retracting devices: 2 units Feed direction: configurable from left or right.

Būklė: naujas, Gamybos metai: 2026, Tilting Table Combination for Timber Frame Construction - BS20 The Randek tilting table combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable elements using timber or metal frames. The tables can be operated as stand-alone units or integrated into production lines. Precisely right-angled building components of high quality are achieved thanks to the clamping function. Raising and tilting of the components is performed via a controlled, manually supervised process. The tilting table combination has been developed for the manufacture of prefabricated houses, ensuring high productivity. The adjustable element height ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination has been designed to efficiently carry out the following operations: frame assembly, insertion of insulation material, stapling of plastic or paper membranes, and application and nailing of wall claddings. • Production of right-angled components: the pneumatic clamping mechanism along the long side of the master table presses the frame structure into a right-angled, high-quality, highly accurate component • Automatic tilting of the component (manual control) • Automatic raising of the component Technical Description: • Length options: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Width adjustment between 2250 – 3100 mm; manual adjustment is straightforward • The master table is hydraulically tiltable up to 92°, the receiver table up to 86° • Pneumatically actuated pressing function on the longitudinal side of the master table • 160 mm high stops • Both tables are faced with plywood panels where technically feasible; the plywood facing enables direct placement of sub-components and beams • The tabletops are supported by a robust steel frame • Optimum working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly; the assembly process is straightforward Bsdpfxs Nn Hye Aa Dsdf Safety: • Emergency stop switch on the control panel • CE conformity Advantages: • Precisely right-angled components thanks to the pressing function • Controlled automatic raising and tilting of components • Ideal working height • Flexible width adjustment

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Randek Truss System NT gamina stogo santvaras naudodamas C tipo presavimo galvutes, perkeliamas magnetines fiksatorius ant plieninės grindų ir vieną iš daugelio mūsų kranų sistemų. Kranų sistemos: Sieninis kranas Koloninis kranas Motorizuotas tiltinio tipo kranas Bdjdpfxexwkuqs Aa Djf Kranas su priešsvoriu Presavimo galvutė: 23T, 27T, 35T, 50T Lazerinė sistema kaip pasirinkimas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Gamybos linija / stalas sienų ir stogo plokštėms / elementams. Nuo įsigijimo mažai naudota, atrodo ir veikia kaip nauja. Yra 1 vnt. Randek BS10u su 80 laipsnių pakreipimu ir 2 vnt. BS05 stalai. Pneumatinis tvirtintuvas / spaustuvas ir pneumatiniai ritinėliai, palengvinantys sienos judėjimą. Ilgis: po 9 m. Sienos dydis: nuo 225x900 cm iki 365x900 cm. Pirkimo kaina 2022 m.: 850 000 SEK ≈ 80 000 EUR. Bedpfxexq Rrce Aa Dodf Kaina nurodyta be PVM.

Būklė: naudotas, Pardavimas vykdomas dėl bankroto. Visa įranga įsigyta 2021 m. ir buvo eksploatuota tik apie 3 metus. Gamintojas: Randek (Švedija) Pagaminimo metai: 2021 1. Pjūklas Tipas: SPL 728 X04 Valdymas: Beckhoff, jutiklinis ekranas Kalbos: žr. nuotraukas Kampiniai pjūviai: 0°–360° Įstrižiniai pjūviai: 90°–28° Maksimali medžiagos storis: 250 mm Pjūklo disko skersmuo: 700 mm Galia: 7,5 kW 2. Padavimo įrenginys su sukrovimo funkcija, dešinėje Tipas: UV130F2X05 Ilgis: 13 m Bedpfxoxqpqke Aa Djdf Pakėlimo stalas: 4 000 kg 3. Išvedimo įrenginys su sukrovimo funkcija, kairėje Tipas: IH106F1X01 Ilgis: 10,60 m Pakėlimo stalas: 5 500 kg 4. Etikečių spausdintuvas Gamintojas: ZEBRA Bendri įrenginio matmenys apie: Ilgis 24 m x Plotis 3 m