Pouwels Def 100 pirkti naudotą (25 068)

Sąlyga: naudotas, rida: 10 690 km, galia: 135 kW (183,55 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 300 mm, pirmoji registracija: 05/2023, spalva: balta, sėdimų vietų skaičius: 3, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, stumdomos durys, sėdynės šildytuvas, trauki kontrolė,

Sąlyga: naudotas, rida: 12 168 km, galia: 135 kW (183,55 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 300 mm, pirmoji registracija: 05/2023, spalva: balta, sėdimų vietų skaičius: 3, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, stumdomos durys, sėdynės šildytuvas, trauki kontrolė,

Sąlyga: naudotas, rida: 10 350 km, galia: 135 kW (183,55 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 300 mm, pirmoji registracija: 05/2023, spalva: balta, sėdimų vietų skaičius: 3, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, stumdomos durys, sėdynės šildytuvas, trauki kontrolė,

Sąlyga: naudotas, rida: 12 010 km, galia: 135 kW (183,55 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 300 mm, pirmoji registracija: 10/2023, spalva: balta, sėdimų vietų skaičius: 3, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, stumdomos durys, sėdynės šildytuvas, trauki kontrolė,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2021, veikimo valandos: 3 415 h, X ašies eiga: 425 mm, Z ašies eigos atstumas: 600 mm, bendras svoris: 4 500 kg, valdiklių gamintojas: MAZATROL, ašių skaičius: 2, Šios "Mazak QTC 100 MSL" horizontalios tekinimo staklės buvo pagamintos 2021 m. Idealiai tinka įvairioms apdirbimo operacijoms. Apsvarstykite galimybę įsigyti šias "Mazak QTC 100 MSL" horizontalias tekinimo stakles. Susisiekite su mumis dėl išsamesnės informacijos. Rodpfx Aex Nr T Isb Ajn Papildoma įranga • Griebtuvinis griebtuvas; 2x 3 žandikaulių griebtuvas • Į komplektą įeina strypų krautuvas Mašinos privalumai Techniniai mašinos privalumai • Žinomi defektai: nėra žinomų • Tvirtinimo skersmuo: 68 mm Papildoma informacija Mašina vis dar maitinamaPer skylę einančios angos skersmuo: 52 mm

Gamybos metai: 2010, Sąlyga: paruoštas naudoti (naudotas), Parduodama vertikali Arburg liejimo mašina su horizontaliu įpurškimo agregatu. Užspaudimo jėga: 800 kN, atidarymo eiga: 500 mm, min. įrankio montavimo aukštis: 250 mm, plokštelių atstumas: 750 mm, plokštelių matmenys X/Y: 570 mm/570 mm, maks. formos svoris: 600 kg. Mašinos matmenys X/Y/Z: apie 4300 mm/1700 mm/2100 mm, svoris: apie 3500 kg, darbo valandos: 44117 h. Yra dokumentacija. Galima apžiūra vietoje. Rsdpfx Aboyddy Uo Ajn

Sąlyga: naudotas, Gamybos metai: 2019, including tools: CNC-CONTROLLED MACHINING CENTER morbidelli m100 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with an extensive range of tools for milling and drilling, designed to meet any woodworking requirement. - High Performance: Equipped with drilling spindles operating at 8,000 rpm and the most robust spindle technology available on the market, offering over 1,000 maintenance-free operating hours. - Fully and Optimally Equipped: Suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be customized precisely to your needs. Rodpfxevvi Sco Ab Aen - Easy and intuitive programming thanks to the integrated Maestro CAD-CAM CNC software. - User-Friendly Operation: The lowered machine frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional safety enclosures are required. Supporting Structure: The support structure consists of an exceptionally strong monolithic steel base, heavily ribbed and highly robust. The particularly wide support surface was specially designed to ensure machine stability, providing consistent precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support that withstands even the highest loads, ensuring superior quality performance and greater accuracy. The moving gantry is made from a solid single piece, anchored to the base and running on high-quality prismatic guides with recirculating ball-bearing carriages. The working unit is attached to this and moves along the Y and Z axes, also on prismatic guides with recirculating ball-bearing carriages. Movement of the lower moving unit (X-axis) and the working unit along the traverse of the moving unit (Y-axis) is achieved via a helical rack-and-pinion drive. This provides higher tooth-to-tooth power transfer for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing results in less wear of mechanical components and significantly quieter operation. The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic load, enabling high acceleration and deceleration. The main milling unit is directly mounted to the Z-axis carriage, providing extremely fine finishing quality by fully eliminating vibrations. Movement along the X-Y-Z axes is performed by brushless motors driven by static inverters, ensuring: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy due to high-resolution encoders - No need for setup procedures upon machine start-up due to absolute encoders - No routine maintenance because the brushless system eliminates brushes The machine’s axis movements and general device management are controlled via e

Sąlyga: naudotas, Gamybos metai: 2025,

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 27 h, lazerio galia: 4 000 W, 3D pjovimo sistema Solidcutter 100/125 D PBusII Rjdpfx Absuf S Sxs Aon

Sąlyga: beveik kaip naujas (parodų įrenginys), The HPK 100 A is a high-performance hydraulic press from the renowned KNUTH A-Series, which leads the category of hydraulic presses. Its C-frame design ensures maximum rigidity and can withstand peak pressures of up to 100 t. Manufactured in Europe, these machines impress with their precision and durability, featuring large ram plates and a flexible hydraulic system that offers stroke-time flexibility. The mobile operation panel guarantees both high safety and intuitive handling, while high-quality seals and surfaces ensure low wear and long-term reliability. Standard equipment includes a dual-hand control console, a manually adjustable pressure switch, and a Siemens PLC for optimal operation. This hydraulic press is ideal for deep drawing, forming, and punching applications, and custom solutions are available upon request. For further information about the HPK 100 A, an outstanding hydraulic press, please feel free to request a quotation. Rodpfeq R Rk Dox Ab Aon

Gamybos metai: 2019, veikimo valandos: 6 483 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Atnaujinta Comandulli OMEGA 100, 2019 metų, 6483 darbo valandos. Visi guoliai pakeisti, naujas diržas. Įrenginys kaip naujas. Išbandytas. 1 metų garantija. Rjdpfx Aboxudl De Ajn

Sąlyga: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: The climate test chamber enables functional and material property testing of test items under the influence of temperature and humidity. Optimal air circulation with a correspondingly high recirculating air volume ensures effective transfer to the test specimens. The air treatment unit is located at the rear of the inner chamber. The unit’s components are housed in a separate frame behind the chamber for easy access. The control system is installed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Rjdex Eabpepfx Ab Asn Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, measured at supply air with test load and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time All technical data are based on an ambient temperature of +25 °C, rated voltage 400 V, without test specimens, no radiant heat, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Approx. internal dimensions: Height: 2,300 mm / Width: 1,600 mm / Depth: 1,550 mm External dimensions: - Height: 2,800 mm / Width: 2,250 mm / Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight carrier available – costs and arrangements upon request - Scope of delivery: see picture (Subject to changes and errors in technical data. All information provided without liability!) Feel free to contact us by phone for any further questions.

Sąlyga: labai geros būklės (naudotas), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables testing of a specimen’s function or material properties under the influence of temperature and humidity. Efficient air circulation with a high air recirculation volume ensures optimal transfer to the test material. The air handling compartment is located at the rear of the interior. The system's aggregates are mounted behind the unit in a separate frame for easy access. The control system is housed in a separate control cabinet, with the operating panel built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 - ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Internal Dimensions (test space/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Approximate internal dimensions: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External Dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling System: water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Viewing available by appointment (46325 Borken) - Shipping via freight forwarding available – costs & arrangements upon request Rodpjx Eaxbefx Ab Ajn - Scope of delivery: (see picture) (Subject to modifications and errors in the technical data and specifications!) We would be happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Redpsx D Abpjfx Ab Ajn Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Sąlyga: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 08/2016, krovimo vietos ilgis: 7 500 mm, krovinių skyriaus plotis: 2 500 mm, krovos erdvės aukštis: 2 700 mm, spalva: balta, Gamybos metai: 2016, pavaros tipas: kitas, vairuotojo kabina: kitas, Įranga: ABS, aušinimo blokas,

Sąlyga: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 195125, Svoris: 5.040 kg, valdymas MAZATROL Matrix, drožlių transporteris, įrankių keitiklis, didžiausias įrankio ilgis: 210 mm, DĖMESIO: atsiėmimas šioms prekėms tik pagal susitarimą! Rjdpfxsycirye Ab Aen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0119-2207-0001-7, keliamoji galia: 100 kg, bendras aukštis: 1 500 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, įvesties srovės tipas: Oro kondicionierius, sukamosios stalo skersmuo: 300 mm, bendras svoris: 300 kg, aukščio reguliavimo tipas: mechaninis, stalo apkrova: 100 kg, pasukimo diapazonas: 90 °, disko skersmuo: 300 mm, produkto aukštis (maks.): 1 500 mm, suvirinimo srovė (maks.): 400 A, Įranga: dokumentacija / vadovas, žr. pridėtas nuotraukas Rjdpeya Urgsfx Ab Aen

Sąlyga: geras (naudotas), Tranklein EK-D 100 Doppelte Eckenrundschneidemaschine Hergestellt in Deutschland, Karl Tranklein. Sehr guter Zustand. Dies ist ein professionelles Produktionsgerät zum Rundschneiden von Ecken. Stabile Gusskonstruktion garantiert präzisen Betrieb. Rodpfxjwxtguj Ab Aen Zwei Schneidköpfe. Auswechselbare Messer. Verstellbare Anschläge. Ein Messersatz im Lieferumfang enthalten. Stapelhöhe: 100 mm Gewicht: 140 kg Leistung: 50 Takte/Min. Stromversorgung: 400 V

Sąlyga: labai geros būklės (naudotas), CTS 3G C 400* – Hot Water Boiler for Superheated Water, Manually Fed with Wood Waste Thermal capacity: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Fitted with control thermostat, safety thermostat, and thermometer. Fuel type: wood waste. Exhaust system: cyclone separator, forced draft fan, connection ductwork. Steaming Chamber Net Capacity: 100 m³/batch. Type DVK-I 100 m³ – 1 pc, dimensions: 8.5 x 9 m, height 4.3 m. Control unit: Baschild Italy. Rsdpow Ev Twsfx Ab Aon Sliding door. Oxyvent overpressure system. Stainless steel tanks and radiators on three sides. Includes turnkey connections between boiler and steamer, and complete boiler room equipped with distributor, manifold, pumps, expansion tank, etc.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1992, Hidraulinės profiliuotų plienų žirklės Peddinghaus Hidraulinė mašina su 5 stotimis: skylių štampavimas, išpjovimas, juostos plieno kirpimas, kampinio plieno, pilnavidurių medžiagų; skylių štampavimo rankinė svirtis, profilio žirklė su kojiniu jungikliu Skylių štampavimo išsikišimas 510 mm, Spaudimo galia 60 t Išsikišimas 510 mm Kirpimo diapazonas 500 x 12 arba 400 x 16 mm Skylių štampavimo diametras 27 mm į 17 mm Skylių štampavimo diametras 39 mm į 12 mm Apvalus plienas 45 mm Kvadratinis plienas 40 mm Kampinis plienas 120 x 13 mm Juostinis plienas 500 x 12 mm Variklis 7,5 kW Alyvos kiekis 80 litrų Redeyayiqjpfx Ab Ajn Svoris 3 t Kaina: 3.750 EUR + PVM, atsiėmimas iš vietos.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1968, Iš karto galima vietoje: Hidraulinis lankstymo presas Lotze Tipas P 100 – 3,5 Pagaminimo metai 1968 Redpfx Absyaybye Ajn Spaudimo jėga 100 t Darbinis ilgis 3.500 mm Stulpų tarpas 3.050 mm Eiga 315 mm Išsikišimas 200 mm Variklio galia 11 kW Pilnas viršutinių ir apatinių įrankių komplektas Svoris 8 t Kaina 4.000 EUR + PVM, atsiėmimas iš vietos

Sąlyga: naudotas, Description Digital display (3 axes) Technical Data: Clamping surface: 1100 x 300 mm Longitudinal travel: 700 mm Cross travel: 250 mm Vertical travel: 470 mm Rodpo Twi Hjfx Ab Aon Spindle speeds: 45 - 2000 rpm Spindle taper: ISO 40 12 feed rates for milling Longitudinal and cross feed: 18 – 800 mm/min Vertical feed: 7.2 – 320 mm/min Milling spindle drive motor: 7 HP Table drive motor: 1.5 HP Machine weight: approx. 2050 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Working Area Chuck Diameter 160 mm Maximum Weight 86* kg Swing Diameter 200 mm X-axis Travel (Stroke) 380 mm Z-axis Travel 660 mm Loading Time (depending on clamping device) 1 – 2 sec. Main Spindle 2 units Spindle Flange acc. to DIN 55026 5 size Spindle Bearing – Ø front 80 mm Maximum Speed 6000 rpm Main Drive, see description 2 units Feed Drive Rapid Traverse Speed, X 60 m/min Rapid Traverse Speed, Z 60 m/min Feed Force in X/Z 3.75 / 7.5 kN Ballscrew Ø in X / Z 32 / 40 mm Rjdpfevz S Sijx Ab Asn Turret, see description Electrical Equipment acc. to VDE 0113 Operating Voltage 400 V Control Voltage DC 24 V Control Voltage AC 230 V Frequency 50 Hz Connection Data Connected Load without loader 36 kW Connected Load with loader 39 kW Rated Current 64 A Incoming Line Protection 80 A Dimensions and Weight Depth 2800 mm Depth incl. chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 3 mėnesiai, paskutinio kapitalinio remonto metai: 2023, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 01/2027, bendras svoris: 540 kg, bendras plotis: 1 100 mm, bendras ilgis: 1 140 mm, įėjimo dažnis: 50 Hz, elektrinė saugiklis: 16 A, Hub knetė Kemper F 100 SE Nerūdijančio plieno dubuo ir minkymo ranka 2 greičiai, 1 laikmatis patvari technologija mašina judinama tik pas mus patikrinta pagal DGUV V3 Jungtis: 400V, 16A-CEE kištukas Išmatavimai: 1110 x 1140 x 1310/2050 mm (plotis x gylis x aukštis) Naudota mašina, išvalyta ir patikrinta SAB su garantija ir atsarginių dalių servisu Parinktys: Priežiūros sutartis Atsarginių dalių dėžutė Rjdpfxsyakh De Ab Ajn Paslaugų paketas Pristatymo paslauga Instruktažas ir paleidimas Apsilankykite mūsų didelėje ekspozicijoje!

Sąlyga: naudotas, Gamybos metai: 1980, Techniniai duomenys: Spaudimas: apie 100 t Atstumas tarp stulpų: 500 mm Rodpfx Aeu Nfhdjb Ajn Išsikišimas iki stūmoklio centro: 350 mm Įrengimo aukštis: 450+100 mm Stūmoklio eiga - min.: 26 mm Stūmoklio eiga - maks.: 152 mm Stūmoklio reguliavimas: galimas/possible mm Stūmoklio paviršius: 550 x 400 mm Tvirtinimo stalas: 1020 x 710 mm Bendras energijos poreikis: 10 kW Apytikslis mašinos svoris: apie 7 t Apytiksliai matmenys: Ilg.:2,0 x Pl.:1,7 x Aukšt.:3,2 m - be tempimo pagalvės Presa galima pademonstruoti.