Klimatinio bandymo kamera, 5500 litrų (5,5 m³)

CTS CW-60/5,5 -60°C bis +100°C

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: Ppedpfx Aex Eaxbjpysr - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2013, Thermo container used; refurbished with signs of previous use Model designation: C-720ü Technical Data Internal dimensions: 610 x 810 x 1440 mm Poded Syhajpfx Apyspr External dimensions: 735 x 955 x 1770 mm Weight: approx. 90 kg Capacity in liters: approx. 720 With insertion rails for shelves Features Central door locking 2 side pull handles 1 fold-down handle in the door recess Chassis with 108 mm castors, PA, cold store certified Door retainer Inner tub with insertion rails Angle corner supports with edging PE panels (2 mm thickness), light blue Profiled protective plates (3-sided) 2 fixed wheels, 2 swivel wheels, lockable with padlock Load capacity up to approx. 400 kg From company liquidation, RECONDITIONED Prices: net per piece plus current VAT Final cleaning to be carried out by buyer Auction consists of one container Sale color subject to stock availability Due to time constraints, inquiries regarding this item can only be answered if a telephone number is provided. Approx. 100 pcs in stock Item available for collection only. If you require shipping, please contact us by telephone in advance.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Ppsdpfxox D Abpo Apyor Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, Ilgis: apie 2,6 m Plotis: apie 1,7 m Aukštis: apie 2,3 m Pjdpsw Tmllofx Apyjpr Įranga: Šaldymo agregatas (Technobloc, tipas: ACN050U, galia: 0,7 kW, šaltnešis: R404a)

Būklė: naujas, mašinos/transporto priemonės numeris: 1900040028, konvejerio juostos ilgis: 1 700 mm, konvejerio juostos plotis: 440 mm, konvejerio juostos greitis: 57 mm/s, galia: 0,18 kW (0,24 AG), įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, Voran transport conveyor 1,700 x 440 mm FDA compliant Ppsdpfx Astv E Diepyjr

Būklė: naudotas, Šaldymo/šaldiklio kamera Viessmann - Išoriniai išmatavimai: 3300 x 2100 x 2450 mm - Vidiniai išmatavimai: 3100 x 1900 x 2250 mm - Plokščių storis: 100 mm - Durų praėjimas: 800 mm - Nerūdijančio plieno grindys - Komplekte sieninis agregatas - Sandėlyje: 1 vnt. Ppsdpfsxqpgrjx Apyer - Kamera lengvai montuojama

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, spaudimo jėga: 15 t, Hidralmac C-Frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic C-frame combination press from Hidralmac with 15 t pressing force. The machine is a manual special-purpose solution, ideally suited for flexible assembly, straightening, and pressing tasks in workshop and service environments. The table plate can be swung out to the left. The lower base plate can be positioned at 3 different heights. Using the rotary crosshead, the press ram can be manually lowered. Special Features of this Press: The operator can apply very sensitive pressing force from 0 up to 1.5 T. This is particularly important when pressing in ball bearings. We have supplied this type of press several times to the aerospace industry, where precise and careful operations are essential. After exact positioning, the hand pump can then be used to build up pressure up to 15 T. ##### Technical Specifications & Information: Assembly/Disassembly Press – 15 T – 270 × 600 mm ==== General Features - Design: C-frame / Manual Hydraulic Press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Hole in table: Ø 60 mm - Distance from bottom recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel construction - Table: swing-out - Lower table: height-adjustable (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via lever and hand pump - Fine control: 0–1.5 T via rotary crosshead - Hand pump: 0.5 l - Pressure display: manometer ==== Controls - Operation: manual via lever and rotary crosshead - Pressure regulation: finely adjustable mechanical system Pedpfx Apefhcc Isyspr ==== Safety - Anti-rotation device - Sturdy frame construction ##### Application Areas: Press-fitting, push-out operations, assembly, disassembly, straightening, bearing technology, workshop work, maintenance, precision assembly, service assignments, small batch production Hydraulic press, hydraulic assembly press, assembly press, disassembly press, workshop press, 15 T press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, pressing-in press, bearing press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with the German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), as well as EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian NR 12 safety directive, which is based on these standards. Our core competence lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Būklė: labai geros būklės (naudotas), Type: Weiss WT3-340/70 Very good condition Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant R-404A; conversion to R452A available upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating Data: Test chamber illumination: 24V, 50W halogen bulb Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A, Rated power: 4.1 kW Customer-side fuse: 16 A slow-blow Sound pressure level approx.: Measured at 1m distance from front, 1m height: 58 dB(A) Temperature Testing Data: Ppodpfx Apjv Edd Soyer Temperature range: -72 to +180 °C Temporal temperature deviation in usable volume center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo documented trial operation with calibrated measuring devices. Condition: Used / very good condition

Būklė: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Specimen mass: 1,000 kg Cooling / Heating operation: -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Ppsdjvx Nfbspfx Apysr Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.

Būklė: naudotas, Išoriniai matmenys: 2600x2900x2110 mm Vidiniai matmenys: 2400x2700x1950 mm Sienelių storis: 80 mm Temperatūra: -2+8 ºC / -18-23 ºC Šaltnešis: R452A Klimato klasė: 5 Šaldymo blokas iš anksto sumontuotas ant panelės Automatinė kondensato vandens išgarinimo sistema Vidinis apšvietimas Plokščių apdaila: specialiai maisto pramonei skirta, dažyta skarda, šviesiai pilka spalva Segmentacija: 300 mm žingsnis, naudojant 300, 600, 900 ir 1200 mm plokštes Panelių jungimo sistema su dvigubais kabliais Apvalios durys ir 45° kampu pjauti vidiniai kampai Ergonominė rankena su užraktu ir avarinio atidarymo sistema Slėgio balansavimo vožtuvas Grindys iš nerūdijančio plieno su neslystančia danga Durys reversuojamos, automatiškai fiksuojasi 90°, galimi du dydžiai, atidarymo plotas: 600 mm ir 700 mm Vyriai su nuolydžio sistema CFC neturintis poliuretano užpildas, įpurškiamas aukštu slėgiu, tankis – 41 kg/m³. Ppsdpex Eyhfsfx Apyer