Plona Pjovimo Rėmelis Pamačiau pirkti naudotą (7 116)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 13386, Rotoriaus skersmuo: 800 mm Rotoriaus plotis: 1200 mm Rotoriaus peiliai: 7 Statoriaus peiliai: 3 eilės Dcsdpfxexgi Syj Admon Įėjimo skerspjūvis apie 1200 x 800 mm Pavaros variklis: 132 kW

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 40 000 h, kuro tipas: dujos, nominali galia: 4 kW (5,44 AG), Lazerinis pjovimo įrenginys PRIMA POWER Platino 1530 4 kW fiber Darbinis plotas: 3000x1500 mm Galia: 4 kW Technologija: Fiber Šaltinio gamintojas: IPG Šaltinio modelis: YLS4000 Darbo valandos: 40 000 Prieinamumas: iš karto Vieta: Kroatija Dcsdpfx Adjwitq Uomjn

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. Dcsdpsw Sy T Hsfx Admon POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length with filter: 5,300 mm. Dcjdpfjd N Rfdjx Admen Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronized speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Standard equipment: • Control system: Siemens Sinumerik 840 D • Laser head: Precitec Light Cutter F 125 Focus • Sheet metal detection and measuring system • Positioning laser diode • Automatic plate changer • Automatic nozzle cleaner • Central lubrication unit • Scrap tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: Remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options included: • Tower with 10 pallet positions • Automatic chip conveyor • Integrated camera (part post-processing, micro-joints) • Air dryer • Auto nozzle changer (automatic nozzle changer) • Camera inside

Gamybos metai: 2014, veikimo valandos: 30 843 h, Sąlyga: paruoštas naudoti (naudotas), Pagrindinis variklis Ašių skaičius: 3 Papildoma įranga Dcedpfsxgwctsx Admjn Rezoliatorius: 4 kW CO2 Šis 3 ašių TRUMPF TruLaser 3030 buvo pagamintas 2014 m. Jis turi 4,0 kW CO2 rezoliatorių ir apdirba didžiausio 3000x1500 mm formato lakštus. Jei ieškote aukštos kokybės pjovimo galimybių, apsvarstykite mūsų parduodamą TRUMPF TruLaser 3030 staklę. Dėl platesnės informacijos apie šią staklę susisiekite su mumis. Pritaikymo sritys Pjovimas

Sąlyga: geras (naudotas), Linie zum Umstapeln, Besäumen und Ablängen von Brettern und Bohlen. Besteht aus folgenden Hauptkomponenten: - Seitenförderer für Pakete Dcodpfxjqcvfus Admsn - Kippheber - Entstapelungseinheit - Kappsäge für Längenzuschnitte nach Auswahl - Seitenförderer zum Stapler - Holzstapler - Hubtisch - Seitenförderer für fertige Pakete. Bitte beachten Sie, dass wir eine automatische Stapel-/Verpackungseinheit separat zur Installation anbieten können.

Sąlyga: naudotas, Rotoriaus skersmuo: 800 mm Rotoriaus plotis: 1200 mm Rotoriaus peiliai: 7 Statoriaus peiliai: 3 eilės Dcedexgi Stspfx Admen Įvado skerspjūvis apytiksliai: 940 x 1154 mm Pavaros variklis: kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, HEGLA, ProLam 46 Automatic laminated glass cutting system Djdpev I Ed Eefx Admecn Year of manufacture: 2014 In very good technical condition. Inspection possible by appointment. Available: IMMEDIATELY

Sąlyga: naudotas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: AEX0003705, Cutting area: 5600x5600 mm 1x compact label printer 1x eye-M EVO control console 1x gabbiani gt 3 130 (56) - high-performance panel dividing saw with lifting table 1x Human-Machine Interface software (HMI) MAESTRO ACTIVE 1x Maestro pattern 1x high-performance stationary air cushion table with guide, 2500x600 mm, with infeed rollers 3x high-performance movable air cushion table - 2500x600 mm, with infeed rollers 1x double lateral automatic aligner with motor drive 1x foot switch for START/STOP of the work cycle 1x grooving device with blade height adjustment via control system 1x autosetting device on the saw carriage for cutting length/width 1x main saw blade motor 25HP (18kW) 50 Hz with star-delta start 1x quick-release for saw blades with AKE mechanical flanges 1x selective gripper closure (range 0 - 1600 mm) 3x additional double grippers 4x additional single-finger grippers 1x compact office label printer 1x cut editor 1x Maestro optiwise - Advanced - No. 1 license 1x Maestro connect: service contract for 1 year (gateway plug&play kit included) 1x pedestal 1x MACHINE LANGUAGE: German Dcodpfx Adexlvktsmsn 1x PC LANGUAGE: German 1x SPEC01 special configuration 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (the daily working time is 8 hours including travel time). incl. 1 day of online training for MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)

Sąlyga: naudotas, Maximum cutting width: 610 mm Maximum cutting height: 150 mm Saw blade diameter: 600 mm Motor power: 9.2 kW Speed: 2750 rpm Compressed air connection: 7 bar Working height: 900 ± 20 mm Dimensions (L/W/H): 770 x 1385 x 1370 mm SALVAMAC Legend 600 Fast semi-automatic cross-cut saw Maximum cutting capacity: 420x150 / 520x100 / 610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The machine frame is constructed entirely from sturdy, thick-walled steel, fully painted and reinforced throughout. A robust floor-mounting system with flanged steel feet ensures secure installation. The two-hand control is ergonomically positioned for comfortable and efficient operation. Saw motor power: 9.2 kW. The cutting speed is adjustable via a pneumatic regulator to allow precise adaptation. In addition, the system features a shock-absorbing mechanism to minimize vibrations and enhance work safety. Carbide-tipped circular saw blade, diameter 600 mm, Z=132. The upper pressure hood is equipped with electro-pneumatic control for precise operation. The movement system of the pressure hood uses innovative ball bearings with double dust protection and an automatic lubrication system, ensuring smooth functionality. Dodsvnv U Uopfx Admocn The electrical system is compliant with CE standards. CE models are supplied as standard with infeed and outfeed tables (unpowered roller conveyors or flat table) of at least 1 meter in length, optimizing workflow and ensuring safety compliance. Technical specifications: --- Sawing cross section: 420x150 / 520x100 / 610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: Carbide-tipped Z=132 Blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Extraction port: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: 400V/50Hz 3-phase Table height: 900 mm ± 20 mm Colour tone: RAL 7035 --- Total ex works price: on request! --- Options include: - Infeed/outfeed with unpowered rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop pusher (Combo series) - Movable front guard and more on request! --- (Technical data as provided by the manufacturer, subject to change without notice!)

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), Pagrindinė pavara Ašių skaičius: 3 Šis 3 ašių TRUMPF TruLaser 3030 Fiber pagamintas 2014 m. Turi 3,0 kW galios skaidulinį rezonatorių ir gali apdoroti lakštus iki 3000x1500 mm. Puikiai tinka tiksliam pluoštiniu lazeriu pjovimui – apsvarstykite galimybę įsigyti šią TRUMPF TruLaser 3030 Fiber pjovimo mašiną. Susisiekite dėl daugiau informacijos. Taikymo sritys Dcodpfx Ajxgwcgodmjn Pjovimas

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, bendras svoris: 155 kg, Įrenginys kaip naujas, naudotas labai retai. Dodpfxsw S Ht Hs Admjcn

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 13260, Rotoriaus skersmuo: 600 mm Rotoriaus plotis: 1000 mm Rotoriaus peiliai: 5 Dcodpfx Adexgi Smjmjn Statoriaus peiliai: 2 eilės Įvado skerspjūvis apie 720 x 980 mm Variklio galia: 75 kW

Gamybos metai: 1992, Sąlyga: naudotas, Dvigalvė pjūklas ELUMATEC - tipas DG 142 Dsdpfjpcgz Djx Admocn - metai 1992 - diskai 500 mm

Sąlyga: naujas, Gamybos metai: 2024, Condition: new Year of manufacture: 2024 Stock number: 2517 Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €40,130 Leasing rate: €766.48 In stock: 1 unit Working area: 1500 x 3000 mm Plasma power source: Hypertherm Powermax 125 Max. sheet thickness – mild steel: 25 mm Max. sheet thickness for piercing – mild steel: 25 mm Max. sheet thickness for severance cut: 57 mm Recommended sheet thickness (unalloyed steel): 25 mm Current: 125 A Rapid traverse speed: 24 m/min Repeatability: 0.1 mm Max. load capacity: 400 kg/m² Length: 3560 mm Width: 1960 mm Height: 1500 mm Weight: 650 kg DEMONSTRATION MACHINE Compressed air-operated plasma source HYPERTHERM Powermax 125 CNC workbench software (external PC not included) Dsdpfjwva Iaex Admocn Adjustable guide rollers Precision linear guide rails (HiWin) Backlash-free HTD timing belt Drive via stepper motors Robust frame construction Individually replaceable slat support Water bed for spark containment Manual controls for easy positioning and setup on the workpiece Operating instructions in GERMAN Equipment in accordance with CE regulations INCLUDING THE FOLLOWING OPTIONS: Automatic height control via arc voltage Setup laser Extraction bridge (prepped for extraction DN160mm)

Sąlyga: naujas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2,800 rpm Compressed air connection: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10,645 x 1,000 x 1,300 mm SALVAMAC COMBO 500 – The semi-automatic cross-cut saw with SALVASTOP 100 - electronic length stop/pusher --- Pos. 1: Legend 500 Under-table Cross-cut Saw --- Maximum cutting capacity: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. h = 100 mm. The machine frame is entirely made of thick-walled, reinforced, fully-painted steel. Solid floor mounting system with flanged steel feet for securing holes. Two-hand safety cut control in ergonomically positioned handles. Saw motor power: 5.5 kW. Dcsdpfx Aevu Hd Tjdmjn Adjustable cutting speed via pneumatic regulator. Maximum weight compensation system for increased durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to different types of material processing. Durable and easily replaceable saw blade setting rail. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece clamp with electro-pneumatic control. Pressing system uses innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE versions must be equipped, as standard, with at least 1-meter-long infeed and outfeed tables. Technical Data: --- Maximum cutting section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide-tipped Z=108 Blade speed: 2,800 rpm Air consumption per cycle: 7 Nl Extraction connection: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50Hz, 3-phase Table height: 900 mm ± 20 mm Color: RAL 7035 - RAL 1007 Pos. 2: Salvastop 100 Electronic Length Stop --- - Operating modes: 2 modes 1 x Stop (length stop positions at desired value), and 1 x Push (sequential processing of multiple lengths at the press of a button) - With servo drive - Pusher speed: up to 60 m/min - Pusher length: 600 mm - 7'' touchscreen display - Max. weight of wood to be pushed: up to 100 kg - USB port COMBO_500 - 6400/7000 - Roller conveyor with guide located to the right of the saw. Painted steel frame with galvanized rollers. Load capacity: 230 kg, roller diameter: 60 mm, spacing: 250 mm, width: 320 mm. Length: 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length: 6.4 m. Total length: 7.0 m. With table: 7 m. Width: 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT GUARD Moveable, rather than fixed, front guard. The guard lifts during cutting to ensure safe working conditions. Loading and unloading of wood is facilitated by the lowered guard. The system is equipped with an additional special secured pneumatic system with linear guidance, reflecting state-of-the-art engineering and advanced technology. SOFTWARE CONNECTION FILES Preparation f...

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Ši OMAX 80X pagaminta 2011 metais. Tvirta vandens pjovimo staklė, galinti apdoroti iki 6000x2000 mm dydžio lakštus ir sukomplektuota su P5060 siurbliu. Jei ieškote aukštos kokybės pjovimo galimybių, apsvarstykite mūsų parduodamą OMAX 80X. Susisiekite su mumis dėl daugiau informacijos. Taikymo sritys: Dcedpfsxgwbcex Admjn Pjovimas

Sąlyga: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTION PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series stands out with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Driven chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vise (before and after the blade) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic systems • Chip conveyor The SNC 20 control allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the material allowance and the number of feed cycles. In addition, the error code display system enables fast analysis for troubleshooting. Dodpfx Adefb Nbfomocn

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 13334, Rotoriaus skersmuo: 600 mm Rotoriaus plotis: 650 mm Rotoriaus peiliai: 8 Dsdpoxgi Sgefx Admocn Statoriaus peiliai: 3 eilės Įvado skerspjūvis apie 650 x 600 mm Pavaros variklis: 75 kW

Sąlyga: naudotas, Saw blade diameter: 500 mm Cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 Optimizing Crosscut Saw for complete wood optimization and defect cutting Version 4100 (processing length) Technical specifications: - Cutting range: minimum 30x12 mm, maximum 270x120 / 300x95 mm. Special cutting ranges available on request. - Length of boards before cutting: minimum 500 mm, maximum 4100 / 5100 / 6100 mm, depending on version - Single cut possible within the last 40 mm of the board. Minimum length of the final offcut: 5 mm. - Maximum wood weight: 120 kg (special reinforced solutions available on request) - Feed with pusher, direct control via innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special work table inclined at 25 degrees to support loading and securely clamp the workpiece. - Dual steel construction, very robust, reinforced and powder-coated. - Special rear interlock guard for appropriate occupational safety. Pusher speed up to 60 m/min according to current safety regulations; working table feed speed is adjustable via computer depending on cutting range. Faster version available as an option. - Very heavy-duty pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum beam is large and robust: height 135 mm and width 120 mm. - Special transmission system with 50 mm wide toothed belt and 33 hardened steel bands inside for high precision and performance. - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Laser photo sensor for wood detection and luminescence reader for fluorescent marks. System is fixed in place, so there is no need for manual adjustment for different wood thicknesses. - Electronic operating system S-OPTIM - Full management of up to 5 cutting qualities - Robust outfeed table for collecting cut pieces, made of hardened steel, length 3000 mm. 25 degree inclination as with the rest of the track and including guidance. ----- Price of the above machine on request! ----- Optional extras at additional cost: - Extension of collection (outfeed) table - Gravity preloading system - Zebra label printer - Upgrade of saw motor from 5.5 kW to 7.5 kW - Increase of cutting range to 140x240 - 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pushing plate Optional alternatives for outfeed table: - Version TT Rotating Table, outfeed table with rotation to unload the entire cut board in one cycle Dcjdpewhf Ipefx Admjn - Floor flap for outfeed table with rotation for disposal of offcuts from the cut wood pieces - Version LS electronic sorter for classifying cut pieces by size and quality, with 3 high-speed ejectors ----- Prices for the above-mentioned options on request! ----- (Data according to manufacturer specifications – subject to change without notice!)

Sąlyga: naujas, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangular 400x250 mm Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Dcsdpfx Adsd Iipromen Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox made from one casting, very quiet and low-vibration cutting - Removable chip tray (for cleaning) - Shockproof and ergonomic control panel with oil-resistant EPDM cover - Excellent accessibility to saw, material and feed unit - Safety cover foldable - Fine feed adjustment - Semi-automatic cutting! - CNC control for optimizing workflows Input options for different parameters such as quantity and material lengths, automatic calculation of cutting kerf - CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnant piece length 170 mm.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12979, Rotoriaus skersmuo: 300 mm Rotoriaus plotis: 200 mm Rotoriaus peiliai: 3 Dodexgi Saepfx Admecn Statoriaus peiliai: 3 Įvado skerspjūvis apie 220x320 mm Pavaros variklis: 5,5 kW

Sąlyga: naudotas, Max. cutting width: 330 mm Max. cutting height: 150 mm Saw blade diameter: 550 mm Motor power: 7.5 kW Dcsdpfx Adovnv T Romen Speed: 2800 rpm Compressed air connection: 6–8 bar Working height: 900 ± 20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 550 High-speed semi-automatic crosscut saw ----- Maximum cutting area: 220x150 / 330x50 mm (When cutting stacked boards, note: Rear stop height 100 mm) The frame is constructed entirely of sturdy, thick-walled steel, continuously painted and reinforced. A solid floor-mount system with flanged steel feet ensures secure installation. The two-hand control is ergonomically positioned for comfortable and efficient operation. Saw motor power: 7.5 kW. The cutting speed is adjustable via a pneumatic regulator for precise control. The system is also equipped with a shock-absorbing mechanism to minimize vibration and improve workplace safety. TCT circular saw blade, diameter 550 mm, Z=96. The upper pressure hood is fitted with electro-pneumatic control for precise operation. The movement of the hood is managed by innovative ball bearings with double dust protection and an automatic lubrication system, ensuring smooth functionality. Additionally, the electrical system is compliant with CE standards. CE models are equipped as standard with infeed and outfeed tables of at least 1 meter each (with non-driven rollers or flat tables) to optimize operation and meet safety standards. Technical data: ----- Crosscut capacity: 220x150 / 330x50 mm Saw blade motor power: 7.5 kW Saw blade diameter: 550 mm Saw blade type: TCT Z=96 Blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Extraction spigots: 1 x 120 mm / 1 x 100 mm Air pressure: 6 – 8 bar Voltage: 400V / 50 Hz, 3-phase Table height: 900 mm ± 20 mm Colour: RAL 7035 ----- Total price ex works: On request! ----- Available options: - Infeed/outfeed with non-driven rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop pusher (Combo series) - Movable front guard Further options on request! ----- (Technical data as per manufacturer, subject to change!)

Sąlyga: naudotas, Maximum cutting width: 375 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW Speed: 2800 rpm Compressed air connection: 6-8 bar Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 500 Fast semi-automatic cross-cut saw Maximum cutting capacity Option A: 220x125 / 310x50 mm Option B: 350x80 / 375x50 mm (When cutting stacked boards, please note: Rear fence height 100 mm) The frame is constructed entirely from robust, thick-walled steel that is fully painted and reinforced. A solid base mounting system with flanged steel feet ensures secure installation. The two-hand control is ergonomically positioned for comfortable and efficient operation. Saw drive motor power: 5.5 kW. The cutting speed can be adjusted via a pneumatic regulator, allowing precise control. The system is also equipped with a shock-absorbing mechanism to minimize vibrations and enhance workplace safety. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. The upper pressure hood features electropneumatic control for precision handling. The hood movement system is operated by innovative ball bearings with double dust protection and an automatic lubrication system, ensuring smooth functionality. Additionally, the electrical system is CE-compliant. CE models are supplied as standard with infeed and outfeed tables (at least 1 meter long, non-driven roller tracks or flat tables) to optimize operation and meet safety standards. Technical specifications: ----- Cutting section: Option A: 220x125 / 310x50 mm Option B: 350x80 / 375x50 mm Dedpfx Asvnv U Ijdmecn Saw motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide-tipped, Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connection: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm ±20 mm Paint shade: RAL 7035 ----- Total price ex works: on request! ----- Available options: - Infeed/outfeed with non-driven rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop pusher (Combo series) - Movable front guard and more on request! ----- (Specifications according to manufacturer, without guarantee!)

Sąlyga: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. Djdpfx Ajv Uq Tledmjcn 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)