Milteliai Šilo pirkti naudotą (1 848)

Būklė: labai geros būklės (naudotas), 2 x 55 m³ aliumininiai silosai su ilga atramine briauna, ø 3.000 mm (miltelių silosas) Talpa: apie 55.000 ltr. Gamintojas: Zeppelin Fodjwg Dd Hepfx Afdeph Pagaminimo metai: 2005 Kiekis: 2 vnt. Skersmuo: apie 3.000 mm Cilindro aukštis: apie 10.025 mm Bendras aukštis: apie 11.265 mm Svoris: apie 1.900 kg Birių medžiagų tankis: 0,6 kg/dm³ Medžiaga: AlMg3 Jungtys ir prisijungimai: Viršutinėje dalyje: 1 x stogo krašto turėklas (ø 3.000 x 1.250 mm) 2 x krano kilpos 1 x žmogaus anga DN 600 1 x flanšas DN 150 1 x flanšas DN 100 (užpildymo anga) 1 x flanšas DN 100 1 x flanšas DN 250 (su viršslėgio ir vakuuminiais vožtuvais) 1 x 1 1/2" sriegis (pilnumo jutiklis) 1 x 1 1/2" sriegis (rezervas) 1 x siloso filtras (Infrastaub gamyba) Korpuso dalyje: 1 x užpildymo linija 1 x praėjimo durys Vienas iš silosų turi dvigubus įlipimo laiptus su apsauginiu atlošu. Silosas baigiasi 60° kūgiu su DN 150 flanšu ir apžiūros sklende. Yra brėžinys Kita informacija pagal nuotraukas

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Miltelių padavimo įrenginį sudaro bunkeris ir vibracinis padaviklis, kuris tolygiai paskirsto granules 130 cm pločio danga ant spausdintos perkėlimo popieriaus, esančio po ja ant 140 cm pločio ir 150 cm ilgio tinklelio konvejerio juostos. Mašinos aukštis reguliuojamas nuo 88 iki 100 cm, o bendras ilgis yra 150 cm. Tiek miltelių padavimas, tiek konvejerio greitis reguliuojami atskirai, kad būtų užtikrintas optimalus procesas. Pertekliniai milteliai efektyviai pašalinami naudojant oro srautus, išbarstymo mechanizmą ir šepečius. Tylus automatinis savaiminio išsivalymo filtrų sistema perdirba miltelius atgal į bunkerį pakartotiniam naudojimui ir išleidžia išvalytą orą. Kad sumažėtų statinės elektros poveikis, per konvejerio plotį yra įrengtos dvi antistatinės juostos. Fodpfxox R N Uro Afdeph

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), For sale: 2 coal dust silos. Capacity: 120 m³ each Silo material: S235 Discharge cone material: Stainless steel, from Ø 250mm to Ø 1450mm Diameter: 3.40 meters Silo height: 20.6 meters Fjdoh Dix Ispfx Afdeph Total height: 24 meters Weight: 22 tons Explosion vent: DN 1300 Implosion flaps: 2x DN 500 Silo filter: Ø900mm Infra Jet AJP 304 (30m²) Filling line: DN100 Discharge cone: 70° Fluidization with 6 nozzles Level measurement: Endress Hauser Soliphant Discharge and dosing via dense phase conveying Manufacturer: Altmayer Airdos PDF 800 Rotary valve: DN 250, manufacturer Kreisel Dismantling has already been completed, silos are stored and immediately available.

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2011, krovinio erdvės tūris: 60 m³, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 1 300 mm, Gamybos metai: 2011,

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, ELLIMETAL silosas skirtas PE granulių laikymui pagamintas iš aliuminio Fsdjyc Nzhopfx Afdeph Pagaminimo metai: 2008 Maks. talpa: 280 m³ ir/arba 168 tonos Skersmuo: 4.500 mm Aukštis: 24.000 mm Tuščias svoris: 7.000 kg Kaina: 40.000 EUR/vnt. (EXW)

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2003, krovinio erdvės tūris: 60 m³, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 1 300 mm, Gamybos metai: 2003,

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2010, krovinio erdvės tūris: 60 m³, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 1 300 mm, Gamybos metai: 2010,

Būklė: naujas, Gamybos metai: 2026, Die horizontalen, semimobilen 30-Tonnen-Silos von Fabo sind moderne Lagersysteme, die für maximale Effizienz und Flexibilität auf Baustellen konzipiert wurden. Sie ermöglichen eine sichere, organisierte und praktische Lagerung von Zement und ähnlichen Schüttgütern, insbesondere in Betonwerken und Infrastrukturprojekten. Dank ihrer horizontalen Bauweise und semimobilen Ausführung bieten diese Silos eine einfache Transportierbarkeit, verringern den Bedarf an festen Installationen und sparen erheblich Zeit bei Montage und Demontage. Ihre robuste Stahlkonstruktion gewährleistet eine lange Lebensdauer und hohe Widerstandsfähigkeit unter anspruchsvollen Einsatzbedingungen vor Ort. Fodpfx Asx Rqm Asfdsph Mit einer Kapazität von 30 Tonnen eignen sich die Fabo Horizontalsilos ideal für mittelgroße bis groß angelegte Projekte und arbeiten integriert mit präzisen Dosiersystemen, um die Produktionskontinuität zu unterstützen. Das benutzerfreundliche Design erleichtert Wartung und Reinigung, während sicherheitsorientierte Details das Betriebsrisiko minimieren. Die in Fabo-Qualität gefertigten horizontalen, semimobilen 30-Tonnen-Silos vereinen Mobilität, Langlebigkeit und hohe Leistung und bieten eine zuverlässige Lösung für Baustellen. In horizontalen Zementsilos werden für Schneckenförderer, Silotopf-Filter, Luftstrahldüsen, Vibromotoren, Drucksensoren und Füllstandssensoren Produkte der Marken WAM oder ÖZBEKOĞLU verwendet.

Būklė: naujas, Gamybos metai: 2026, *Visi mūsų produktai yra gaminami kruopščiai ir padengiami 1 metų garantija! *Įrengimas ir operatorių apmokymai NEMOKAMAI FABO gamina cemento talpyklas (silo) nuo 50 iki 2000 tonų, skirtas skirtingam cemento kiekiui sandėliuoti. Pagal poreikį silosai gali būti suvirinti arba surenkami varžtais. Siekiant užtikrinti nenutrūkstamą gamybą, FABO siūlo papildomus įrenginius, leidžiančius išplėsti bazinio cemento siloso funkcionalumą: lygio daviklius, slėgio išlyginimo vožtuvą ir kitą reikalingą įrangą. CEMENTO SILOSAS: Talpa: 50–2000 tonų (varžtais tvirtinamas) Siloso filtrai: 24,5 m² filtro paviršius (WAM gamintojas) Fodpfev Uxaaex Afdoph Siloso saugumo vožtuvas: - (WAM gamintojas) Lygio indikatoriai: 2 vnt./silosas, gamintojas: WAM, modelis: ILTC220 Fluidizatoriaus antgalis: 3 vnt./silosas, gamintojas: WAM, modelis: U025 Mechaninis vožtuvas ir svirtis: (WAM gamintojas) Siloso užpildymo vamzdis: Ø 114 mm plieninis vamzdis. Dėl papildomos informacijos maloniai prašome susisiekti telefonu!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, *Visi mūsų produktai yra gaminami kruopščiai ir padengiami 1 metų garantija! *Įrengimas ir operatorių apmokymai NEMOKAMAI FABO gamina cemento talpyklas (silo) nuo 50 iki 2000 tonų, skirtas skirtingam cemento kiekiui sandėliuoti. Pagal poreikį silosai gali būti suvirinti arba surenkami varžtais. Siekiant užtikrinti nenutrūkstamą gamybą, FABO siūlo papildomus įrenginius, leidžiančius išplėsti bazinio cemento siloso funkcionalumą: lygio daviklius, slėgio išlyginimo vožtuvą ir kitą reikalingą įrangą. CEMENTO SILOSAS: Talpa: 50–2000 tonų (varžtais tvirtinamas) Fedswfckijpfx Afdeph Siloso filtrai: 24,5 m² filtro paviršius (WAM gamintojas) Siloso saugumo vožtuvas: - (WAM gamintojas) Lygio indikatoriai: 2 vnt./silosas, gamintojas: WAM, modelis: ILTC220 Fluidizatoriaus antgalis: 3 vnt./silosas, gamintojas: WAM, modelis: U025 Mechaninis vožtuvas ir svirtis: (WAM gamintojas) Siloso užpildymo vamzdis: Ø 114 mm plieninis vamzdis. Dėl papildomos informacijos maloniai prašome susisiekti telefonu!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 18 000 mm, išorinis skersmuo: 3 000 mm, vandens talpos tūris: 70 000 l, Iš nerūdijančio plieno pagamintas rezervuaras, talpa 70 000 litrų. Šilumos izoliuotas korpusas su svėrimo celėmis. Tūris Bendra talpa 70 000 l Medžiaga Nerūdijantis plienas Įrangos konfigūracija Šilumos izoliuotas Svėrimo celės Transportavimo informacija Ilgis 18 000 mm Plotis 3 500 mm Fsdpfexlir Dox Afdeph

Būklė: naudotas, tuščias svoris: 2 440 kg, didžiausias leistinas svoris: 11 060 kg, bendras svoris: 13 500 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 04/2019, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 1 770 mm, pakaba: plienas, padangos dydis: 285 /70 R19,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 285 /70 R19,5, galinės padangos dydis: 285 /70 R19,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, suspausto oro stabdys,

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz Fpsdefz Dqxjpfx Afdoh • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector equipped with a high-efficiency radial impeller • Two operating modes: Full Power and ECO • The base weight of the filter material is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter fitted with an individual solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption Fjdpfx Aofz I Rmofdoph • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle Fodpfefz I R Rex Afdsph • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection Fjdpfx Aefz I Sgefdjph • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption Fpodpfx Afofz Dqfedsh • Waste container for easy removal of paint residues • Inspection door for filter exchange • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, Automation Use of a photoelectric cell The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package. Identification of parts using special tags. A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors. This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well. Advantages of using gates and photoelectric cells The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers. Fodpfeflq Spex Afdoph The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating. Identification of parts with special tags A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder. By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators. The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control. Vertical array of spray guns 8 pcs. guns Control – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Axis X MX-100 x 2 pcs. Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – H2000 vertical gate The maximum coating speed is 1.65714285714286 m/min 0 pcs. tractors Air volume required: 10,188 m³/h for operation Minimum cabin passage required: W900mm H2100mm Duct diameter 500 mm – minimum 16.9 m/s 16 m/s Air consumption: 1210 l/min + Sug. SC-20 compressor Min. St

Gamybos metai: 2025, būklė: naujas, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ Fsdpfx Aefz Nd Isfdoph 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Gamybos metai: 2026, būklė: naujas, ROMER cabins are equipped with 4" color touchscreens. The cabin is operated intuitively in three modes: automatic (time-based), automatic (based on a clogged filter sensor), or manual. Automatic filter cleaning The electronic system for automatic filter cleaning offers an adjustable range for cleaning frequency and ignition timing. Each filter is cleaned individually, and filters can also be cleaned manually via the control buttons. From experience, we know that it’s difficult for the operator to consistently perform filter cleaning. Thanks to this system, the operator no longer needs to worry about it. Aluminum fans are very quiet, operating at 74–79 dB—which is not very loud. It is difficult to talk, even with a standard cabin design. Fpsdpfx Asfzkzhjfdsh Browse through the cabin By pulling the lifting rails inside the cabin, the cabin improves work efficiency and relieves the painter, who no longer has to move them by hand.

Gamybos metai: 2020, būklė: naujas, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable and intuitive operation. All key parameters can be set directly on it. Memory for 20 Programs with 10 Events It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is especially required for more demanding processes. Fsdefy Txyepfx Afdoph Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of each specific cycle, plan consumption, and monitor personnel. Dual-Channel Recorder with USB Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to a flight data recorder—onto a USB stick. The system also allows analysis of monthly/daily reports, including media consumption and performance. Every heating cycle, each time the door opens, is tracked for several years. Such a dedicated solution is not offered by any other manufacturer. It is a system developed from scratch by our programmers: automatic smoke extraction flue The chimney can be programmed to open several minutes before the end of the firing process to vent the chamber. It can be remotely controlled from the control panel and does not need to be operated mechanically as with most systems. Minute-by-Minute End Time Forecast The cycle has started—how long will it last? If we calculate the heating dynamics, the system will display the remaining duration on the screen. To open, simply pull the door. The lock features adjustable pressure on the door. To close, just push it shut—the lock catches the door and retracts it automatically. To minimize heat loss in the hall when the door is opened, a hood is installed above the door to divert part of the heat elsewhere. The MTS system was developed to provide true readings of the oven chamber temperature. Standard measurements are based on a single temperature reading, which is often inaccurate. MTS is a multi-sensor system, with sensors located at the furthest points of the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each Fjdpfx Aefzkqmjfdeph You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h Fpsdjfz Dqmopfx Afdjh • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per pulse • 50 l waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • Base weight of the filter material used: up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² Fpjdpfxsfz Dq Aj Afdsh • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 units • Filter area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L 6-8 bar per pulse • 50 L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two operating modes – full power and ECO • The base weight of the filter material used is up to 260 g/m² • High suction performance with low energy consumption Fpodpefz Dttefx Afdjh • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter fitted with its own solenoid valve