Mikron Vce 600 Pro pirkti naudotą (192)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mikron
Mažas skelbimas
Vokietija
999 km
Srieginių frezavimo staklės
Mikron132.02
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Parduodamos penkios senesnės Mikron srieginių frezavimo staklės: 3x hidraulinės volinės frezavimo staklės Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 ir 1x trumpųjų sriegių frezavimo staklės Mikron 106.01. Galima apžiūra vietoje.
Bodjw Sxyxepfx Abfocu
Mažas skelbimas
Vokietija
999 km
CNC universalios frezavimo staklės
MIKRONWF 51C/155
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Speed: 3150 rpm, Travel X/Y/Z: 710mm/500mm/500mm, Number of spindle speeds: 21, Feed rate: 2000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table size X/Y: 500mm/1000mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, Weight: approx. 3300 kg, Control: Heidenhain TNC 155. Documentation available.
Bcjdpfx Abstuwk Uofou
Mažas skelbimas
Vokietija
999 km
Rotacinė perkėlimo mašina
MikronMultistar LX-24
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335h. Documentation available. An on-site inspection is possible.
Bcsdpfx Aew Emx Rebfou
Mažas skelbimas
Vokietija
999 km
CNC apdirbimo centras
MikronUMS 710/900
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6,300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2,400mm/3,400mm/2,300mm, Weight: approx. 4,600kg, Control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible.
Bcsdpow Exr Aefx Abfju
Mažas skelbimas
Vokietija
999 km
CNC universalios frezavimo staklės
MikronUME 560
Skambinti
Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5,000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3,950mm/2,650mm/2,150mm, weight: approx. 3,000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system is showing issues. Documentation available. Inspection on site is possible.
Bsdpfx Aew H At Hjbfjcu
Mažas skelbimas
Zuchwil
1 437 km
Universali frezavimo mašina
MikronWF 3 DP
Skambinti
Sąlyga: labai geros būklės (naudotas), MIKRON WF 3 DP Universal Milling Machine
TECHNICAL DATA
Swivelling Table
Clamping surface: 450 x 800 mm
Number of T-slots: 9
T-slot spacing: 45 mm
Weight: 144 kg
Machine dimensions: 1475 x 1770 x 2000 mm
Weight: 1800 kg
Connected load: 8.7 kW
Milling spindle drive
Spindle speeds: 21 steps
Speed range: 25 – 2500 rpm
Step increment: 1.258
Spindle motor power: 3.3 / 4.0 kW
Tool holder: ISO 40 / M16
Quill travel, vertical: 110 mm
Feed drive
Feeds in all 3 axes: steplessly adjustable
Feed range: 1 – 2000 mm/min
Rapid traverse in all feed directions: 3000 mm/min
Motor torque
Longitudinal + cross: 4 Nm
Vertical: 8 Nm
Travel distances
Longitudinal travel of the clamping table (X-axis): automatic: 400 mm
Cross travel of the clamping table (Y-axis): automatic: 400 mm
Vertical travel of the clamping table (Z-axis): automatic: 385 mm
We do not assume any liability for the correctness, completeness, or currentness of the information provided.
Bjdpjlnfggofx Abfecu
Mažas skelbimas
Zuchwil
1 437 km
Apdirbimo centras
MikronHSM 400 U
Skambinti
Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), MIKRON HSM 400 U High-Speed Machining Center
The exact scope of delivery can be seen in the photo gallery. Included, among others, are: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders, etc.
1. TECHNICAL DATA
Bedpeigrf Isfx Abfocu
Working area
X-axis: 400 mm
Y-axis: 450 mm
Z-axis: 350 mm
B-axis: ±110°
C-axis: 360°
Spindle
Speed range: 100 – 42,000 rpm
Tool interface: HSK E 40
Spindle power at 40% duty cycle: 13 kW
Spindle power at 100% duty cycle: 10 kW
Torque at 60% duty cycle: 4.25 Nm
Torque at 100% duty cycle: 3.2 Nm
Lubrication: oil/air
Feed
Rapid traverse rate: max. 40 m/min
B-axis: 150 rpm
C-axis: 250 rpm
Axis acceleration XYZ: max. 1g (10 m/s²)
B-axis: 100 rad/s²
C-axis: 300 rad/s²
Tool changer: 68 positions
Chip-to-chip time: 12.5 s
Tool change time: 10.0 s
Worktable: 120 mm
Max. workpiece diameter for 360° rotation: 230 mm
Max. workpiece height: 350 mm
Max. workpiece weight: 25 kg
Control: Heidenhain iTNC 530
Weight: 5,500 kg
No guarantee is given for the correctness, completeness, or timeliness of the information provided.
Mažas skelbimas
Wiesbaden
1 198 km
CNC frezavimo staklės
MIKRONWF 41 C
Skambinti
Gamybos metai: 1987, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 152.41.74.002, Table clamping surface: 500 x 1000 mm
Travel path x: 630 mm
Travel path y: 500 mm
Travel path z: 460 mm
Quill stroke (manual): 45 mm
Spindle taper: ISA 40
Bcodpo H I Hdefx Abfsu
Spindle speeds: 31.5 – 3,150 rpm
Feed rates, infinitely variable: 1 – 3,000 mm/min
Rapid traverse: x/y 6 m/min, z 4 m/min
Electrical connection: 380 V, 6/8 kW
Space requirement: 1,800 x 2,120/2,600 x 2,020 mm
Weight: 3,100 kg
Control: HEIDENHAIN, TNC 155
Mažas skelbimas
Vlotho
1 042 km
Gręžimo staklės
Mikron VC1000VC 1000
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Parduodama gerai išlaikyta Mikron VC 1000 frezavimo staklė dėl naujos įsigijimo.
Bcsdpeh Tnpxsfx Abfou
Aukcionas
Aukcionas pasibaigęs
Bayern
1 050 km
Apdirbimo centras
MikronMultistep XS
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KU 4165M, X ašies eiga: 572 mm, Y ašies eiga: 322 mm, Z ašies eigos atstumas: 265 mm, sukimosi greitis (maks.): 15 000 aps./min, įrankių magazino lizdų skaičius: 22, The value of the delivered spare parts amounts to approx. €70,000
Bcodoxamh Eepfx Abfsu
TECHNICAL DETAILS
Loading modules: 1 module
Machining modules: 3 modules
Number of spindles: 6
Control
System: Bosch Rexroth MTX
Part program size: unlimited
Remote diagnostics: available
Programming: ISO code, simulation via CAM software EdgeCAM
Workpiece transport and loading system
Loading system: parallel to main time, manual, with 3-axis handling or robot
Part feeding: paternoster / stack magazine
Workpiece change (chip-to-chip time): approx. 6 s
Axes
Travel X: 572 mm
Travel Y1/Y2: 322 mm
Travel Z: 265 mm
Speed X: 40 m/min
Speed Y1/Y2: 32 m/min
Speed Z: 25 m/min
Acceleration X: 8 m/s²
Acceleration Y1/Y2: 8 m/s²
Acceleration Z: 4 m/s²
Feed force X: 1,100 N
Feed force Y1/Y2: 1,100 N
Feed force Z: 2,500 N
B-axis rotational speed: 1,000 rpm
C-axis rotational speed: 500 rpm
B-axis acceleration: 52 rad/s²
C-axis acceleration: 90 rad/s²
B-axis torque (clamped): 1,000 Nm
B-axis torque (unclamped): 287 Nm
C-axis torque (clamped): 300 Nm
C-axis torque (unclamped): 187 Nm
Working spindle
Tool holder: HSK 40-A
Outer diameter: 108 mm
Rotational speed: 15,000 rpm
Torque (S6 45% duty cycle): 85 Nm
Power (S6 45% duty cycle): 18 kW
Internal coolant supply up to: 120 bar
Spindle distance: 200 mm
Workpiece
Repeatability: +/- 2 µm
Clamping force: approx. 10 kN (self-locking)
Diameter: 140 mm
Length: 180 mm
Weight: 21 kg
Workpiece clamping
Clamping system: EROWA clamping system
Operation: pneumatic, 6 bar
Tool changer
Tool discs: externally pre-settable with position coding, diameter: Ø 290 mm
Tools (2 discs with 12 positions) per machining module: 22
Tool disc weight: 5 kg
Max. tool weight: 2.5 kg
Max. free tool length: 186 mm
Max. tool diameter: 63 mm
Max. tool diameter with free space: 105 mm
Shortest chip-to-chip time: ≥ 1 s
Max. total tool weight per disc: 15 kg
Positioning time per tool step: 250 ms
Tool holder: HSK 40-A, acc. to DIN 69893
MACHINE DETAILS
Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm
Weight per machining module: approx. 4.5 t
Weight per loading module: approx. 2.5 t
Mažas skelbimas
Nürnberg
1 076 km
Apdirbimo centras - universalus
MIKRONHPM 1850U
Skambinti
Sąlyga: naudotas, Gamybos metai: 2008, X-axis travel: 1,850 mm
Y-axis travel: 1,400 mm
Z-axis travel: 720/905 mm
Control: SIEMENS SL 840 D
Spindle speeds: 15,000 rpm
B axis: -20 / +120 °
Tool holder: HSK-A63
Tool magazine with 45 positions
Maximum tool length: 365 mm
Tool diameter with adjacent holders occupied: 90 mm
Tool diameter with adjacent holders free: 130 mm
NC rotary table: 1,600 mm
T-slots: 12
Slot width: 18H12
Slot spacing: 100 mm
Maximum table load: 3,000 kg
Maximum table rotation speed: 30 rpm
Total connected load: 89 kW
Machine weight: approx. 26 t
Floor space required: approx. 7.00 x 6.20 x 4.15 m
5-axis machining centre with Siemens SINUMERIK 840D control, BLUM laser, Renishaw, RotoClear, fire extinguishing system, 2x electronic handwheel, Steptec spindle, spindle oil cooler, ICS, high-pressure pump, Bürener coolant belt filter system, chip conveyor.
The machine can be inspected under power.
Bcsdpfx Aovxwuwjbfju
Mažas skelbimas
Malsch
1 270 km
Kūginių krumpliaračių šlifavimo staklės
MIKRON120.01 Schleifmaschine
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 1972, Ratų skersmuo – maks. 80 mm
Ratų plotis 60 mm
Modulis – maks. 3
Modulis – min. 0,1
Bendras galios poreikis 0,4 kW
Bcjdpfsw N S D Sjx Abfju
Mašinos svoris apie 120 kg
Reikalinga erdvė apie 0,6x0,6x0,75 m
Mašina skirta nedidelių kūginių / tiesių krumpliaračių šlifavimui.
Kūginių krumpliaračių frezavimui naudojama Mikron 102.01.
Mažas skelbimas
Malsch
1 270 km
Horizontalios krumpliaračių frezavimo staklės
MIKRONA 35
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 1991, Machine weight approx. 6 t
The base machine design is characterized by the following features:
- Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head
- Workpiece clamping is between the workpiece spindle head (left) and the tailstock (right)
- The radial slide is mounted on the machine base (X-axis)
- The axial slide travels on the radial slide (Z-axis)
- The shift milling head is equipped with automatic angular adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter
- CNC controlled
- IBH control system
- Loading device
- Extensive accessories
Technical specifications:
- Maximum module for gear hobbing with hobs according to DIN 8002: 4.5 mm
- Maximum module for high-performance milling: 3.0 mm
- Number of teeth: 2 - 999
- Maximum workpiece diameter with manual loading: 200 mm
- Maximum workpiece diameter with automatic loading: 150 mm
- Maximum workpiece length: 400 mm
- Maximum / minimum cutter diameter: 102/40 mm
- Maximum cutter length: 230 mm
- Maximum / minimum cutter arbor diameter (standard): 32/16 mm
- Axial slide travel = maximum milling length, Z-axis: 300 mm
- Radial slide travel, X-axis: 140 mm
- Cutter traverse (shift travel) Y-axis: 100 mm
- Tailstock travel W-axis: 420 mm
- Swivel angle shift milling head (left/right) A-axis: 50°/60°
Milling coordinates:
Bcedpfoub Amfjx Abfsu
- Z-axis: 100 - 400 mm
- X-axis: 100 - 150 mm
- Y-axis (milling spindle face): 50 - 230 mm
- W-axis (tailstock spindle face): 165 - 585 mm
- Cutter speed range, standard B-axis: 0 - 1500 rpm
- Workpiece speed, C-axis: 0 - 350 rpm
Feed rates:
- X-axis: 3500 mm/min
- Z-axis: 3500 mm/min
- Y-axis: 4000 mm/min
- W-axis: 5500 mm/min
- V-axis (portal loader): 80,000 mm/min
Mažas skelbimas
Metzingen
1 242 km
Horizontalios krumpliaračių frezavimo staklės
MIKRONA 33/1
Skambinti
Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm
Wheel width 150 mm
Module – max. 2.5
Module – min.
Total power requirement 10 kW
Machine weight approx. 2,400 kg
Fully automatic hobbing machines for worm gear cutting
Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15
TECHNICAL DATA:
Max. wheel diameter without parts magazine approx. 80 mm
Max. wheel diameter with parts magazine approx. 50 mm
Max. module 2 / 2.5
Axial cutting length approx. 150 mm
Max. workpiece installation length approx. 200 mm
Milling slide swivels up to 90 degrees
Cutter – diameter 24 – 50/63 mm
Max. radial travel of the milling slide 0–14/18 mm
Max. milling cutter shift 25 mm
Cutter speeds 212 – 2,000 rpm
Axial feed rate stepless 0.05 – 4.0 mm/rot.
Radial feed rate stepless 0.2 – 200 mm/min.
Milling spindle drive 3 kW
Total drive approx. 10 kW – 50 Hz – 380 Volt
Weight approx. 2,400 kg
Accessories / Special equipment:
Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter,
program numbering, and 30-position digital error display.
Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and
then inserted into the loading unit.
The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously.
Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled.
The complete loading device is enclosed with Plexiglas.
Hydraulic workpiece clamping device with collets and hydraulic ejector
Separate coolant system with magnetic separator * separate hydraulic unit * various change gears
Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power.
Machine is set up for cutting worm shafts/armature shafts
used in variable transmissions for automotive seat adjusters, window regulators, etc.
Bsdjt Hw D Ropfx Abfecu
Mažas skelbimas
Metzingen
1 242 km
Frezavimo staklės - universalios
MIKRONWF 2/3S
Skambinti
Sąlyga: naudotas, Gamybos metai: 1982, x-travel 400 mm
y-travel 400 mm
z-travel 380 mm
Total power requirement 2.6 kW
Machine weight approx. 1.5 t
O F F E R
We can offer you, subject to prior sale and errors, ex-stock, without obligation:
MIKRON
Universal Tool Milling Machine with Digital Readout
Type WF 2/3 S
Year of manufacture approx. 1981 21S0401
_____
Working range:
Longitudinal travel X-axis 400 mm
Cross travel Y-axis 400 mm
Vertical travel Z-axis 380 mm
Fixed angle table approx. 450 x 800 mm
Installation height under spindle approx. 65 – 445 mm
Spindle taper SK 40
12 spindle speeds 50 – 2,240 rpm
Quill stroke 110 mm
Infinitely variable feeds XYZ 1 - 630 mm/min
Rapid traverse XYZ 1,400 mm/min
Spindle drive power 2.6 kW
Total drive approx. 5 kW - 380 V - 50 Hz
Weight approx. 1,500 kg
Accessories / Special equipment:
• HEIDENHAIN 2-axis digital readout for longitudinal and cross axis
• Infinitely variable feed on all 3 axes with rapid traverse
• Handwheels for all 3 axes for sensitive manual movement
• Vertical head (swiveling +/- 90°) with quill and swing-out device for
using the horizontal spindle
• Hydraulic tool clamping for horizontal and vertical spindles
• Fixed angle table 450 x 800 mounted
• Built-in coolant system, attached control cabinet, central lubrication
• Tool cabinet with extensive accessories including tool holders, horizontal
milling equipment with various horizontal arbors, additional angle milling head,
various operating tools
• Work lamp, central lubrication, table changing device
This machine is still a “real” Mikron milling machine and was made
in tried-and-tested Swiss quality. This machine is ideally suited for both toolmaking
and training purposes.
Condition: Very good condition! Used only for toolmaking.
Delivery: ex-stock, immediately available, FCA Metzingen
Bjdpfx Aeu U Sabebfscu
Payment: strictly net - after receipt of invoice
We always have a selection of universal and CNC milling machines of all kinds in stock –
Please feel free to ask about alternatives!
Mažas skelbimas
Metzingen
1 242 km
Horizontalios krumpliaračių frezavimo staklės
MIKRONA 35/36 CNC
Skambinti
Sąlyga: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm
Wheel width 300 mm
Module – max. 4.5
Module – min. (not specified)
Total power requirement 20 kW
Machine weight approx. 6 t
Space requirement approx. (not specified)
CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992
Workpiece diameter / wheel diameter with automatic loading max. 150 mm
Workpiece diameter with manual loading max. 200 mm
Max. workpiece length approx. 400 mm
Axial milling length (Z axis) 300 mm
Module range for HSS/Carbide cutters 3 / 4.5 mm
Number of teeth min./max. 2–999
Centre distance tool–workpiece min./max. 0–190 mm
Workpiece rotation speed max. 0–350 rpm
Milling slide swiveling left/right 50 / 60°
Cutter size Ø x length 102 x 230 mm
Cutter shift max. (Y axis) 100 mm
Radial slide travel max. (X axis) 10–150 mm
Tailstock travel max. (W axis) 420 mm
Cutter speed stepless 0–1,500 rpm
Feed range on all axes steplessly adjustable 3.5 or 4 m/min
Spindle drive approx. 8.8 kW
Total power approx. 20 kW – 220 V/400 V / 50 Hz
Bcsdpfx Ast Hwxbsbfou
Weight approx. 6,000 kg
Accessories / Special Equipment:
MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms.
Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing.
Workpiece spindle head (C) with quick-change system (collet chuck)
Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device.
Separate coolant unit with magnetic chip conveyor
Enclosed full machine guarding with sliding doors
2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.
Mažas skelbimas
Vokietija
1 248 km
Apdirbimo centras - vertikalus
MIKRONUM 710/900
Skambinti
Sąlyga: naudotas, Gamybos metai: 1997, Technical details:
X-axis travel: 710 mm
Y-axis travel: 630 mm
Z-axis travel: 500 mm
Spindle speed range: 5 - 5,000 rpm
Drive power – working spindle: 11 kW
Tool holder: SK 40
Tool changer: 44 tools
Feed rate: 10 m/min
Clamping surface: 1,200 x 600 mm
Table load capacity: 0.5 t
Total connected load: 15 kVA
Machine weight approx.: 4.24 t
Bsdpovb Hzrefx Abfjcu
Equipped with Heidenhain TNC 426 control, 44-position tool changer, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired electronic handwheel for easy machine setup.
Mažas skelbimas
Bühl
1 295 km
Įrankių frezavimo staklės - universalios
MIKRONWF 51 C
Skambinti
Sąlyga: naudotas, Gamybos metai: 1981, x-travel 800 mm
y-travel 500 mm
z-travel 460 mm
Table clamping surface 1000 x 500 mm
Spindle taper SK 40
Control HEIDENHAIN TNC 150
Spindle speeds 31.5 - 3150 rpm
Bcedpfotqqplex Abfju
Feeds - longitudinal/cross/vertical 1 - 3000 mm/min
Rapid traverse longitudinal and cross 6 m/min
Rapid traverse vertical 4 m/min
Quill stroke 110 mm
Distance spindle nose to table max. 559 mm
Max. table load 500 kg
Total power requirement 14 kW
Machine weight approx. 3.1 t
Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m
Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system
Mažas skelbimas
Bühl
1 295 km
Apdirbimo centras - universalus
MIKRONUMC 710
Skambinti
Sąlyga: naudotas, Gamybos metai: 1998, X-axis travel: 710 mm
Y-axis travel: 630 mm
Z-axis travel: 500 mm
Table clamping surface: 1100 x 585 mm
Rotary table diameter: 500 mm
Spindle taper: SK 40
Bcsdpfotz Sqhex Abfju
Spindle speeds: 5 - 6300 rpm
Spindle power: 11 kW
Number of tool magazine positions: 2 x 22
Control: HEIDENHAIN TNC 426
Total power requirement: 20 kW
Machine weight approx. 5.8 t
Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system
Mažas skelbimas
Rottweil
1 306 km
Perdavimo mašina
MIKRONMULTISTAR
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, NEW ARRIVAL
+++++
Bcodpst I T N Eefx Abfsu
1 used, very well-maintained transfer machine / rotary indexing table machine MIKRON MULTISTAR CX 24
The machine can be inspected under power. Part feeding is not an issue.
Equipped with MITSUBISHI AACPU-S1 control – Year of manufacture: 1996 –
Detailed technical data as per attachment –
The machine can be inspected while cutting.
Modification – installation – commissioning – application can be offered.
Pricing: ex location, unpacked, uninsured.
Delivery time: immediately – subject to prior sale.
Technical data non-binding – errors excepted.
Payment: As customary for used machinery, strictly net payment before collection.
Mažas skelbimas
Borken
1 184 km
Tiksliojo frezavimo ir gręžimo staklės
MikronWF31D
Skambinti
Sąlyga: geras (naudotas), Mikron WF31D Precision Milling and Drilling Machine
Machine with chip and splash guard enclosure
Equipped with a Heidenhain TNC355 controller
Technical Specification
The WF 31 D is a precision milling and drilling machine suitable for series production and CNC training.
Drive via an automatically switchable stepped gearbox and Poly-V belt.
Vertical spindle extendable by 90 mm; conversion from vertical to horizontal machining possible.
Ball screw drives with DC motors enable simultaneous feed movements.
Guideways are protected against dust, chips, and coolant.
Technical Data
Manufacturer: Mikron
Model: WF31D
Control system: Heidenhain TNC 355
Longitudinal travel (X): 560 mm
Cross travel (Y): 500 mm
Vertical travel (Z): 400 mm
Drive power: 3.3/4.0 kW
Speed range: 40–4000 rpm
Feed rate: 2–3000 mm/min
Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min
Electrical Equipment
Total installed nominal power: 10.0 kW
Installed useful power: 7.3 kW
Operating voltage: 3 x 380 V – 50/60 Hz
Protection class: IP 54
Bedowiucfopfx Abfjcu
Max. permissible ambient temperature: +35°C
Relative humidity: 75%
Dimensions and Weights
Width: 2450 mm
Length: 2800 mm
Height: 2000 mm
Net weight of the machine: approx. 2570 kg
You will find more new and used items in our shop!
International shipping costs upon request!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Borken
1 184 km
Universalioji frezavimo staklės, frezavimo staklės, freza
MikronWF 32 CH
Skambinti
Sąlyga: geras (naudotas), Mikron WF 32 CH Universal Milling Machine
Machine with chip and splash guard enclosure
Equipped with a Heidenhain TNC355 CNC control
Technical Specifications
Manufacturer: Mikron
Model: WF 32 CH
Control: Heidenhain TNC355
Travel (axes): X 560 mm / Y 500 mm / Z 400 mm
Clamping surface: 530 x 900 mm
Bcedpjwit Rhjfx Abfeu
Rapid traverse: X, Y 6,000 mm/min; Z 5,000 mm/min
Spindle speed: 20 – 6,300 rpm
Dimensions: 2,700 x 2,000 x 2,400 mm
Weight: 2,400 kg
You can find more items—new and used—in our shop!
International shipping costs available on request!
Mažas skelbimas
Eislingen/Fils
1 206 km
Frezavimo staklės - universalus įrankis kambarys
MIKRONWF 3 DP
Skambinti
Sąlyga: naudotas, Gamybos metai: 1980, X-travel: 500 mm
Bcsdpfx Abscxxq Dofju
Y-travel: 500 mm
Z-travel: 400 mm
Spindle speed range: 30 - 2240 rpm
Infinitely variable feed rates: 1 - 750 mm/min
Rapid traverse: 1500 mm/min
Table clamping surface: 400 x 800 mm
Tool holder: SK 40
Total power requirement: 7.8 kW
Machine weight approx.: 1.8 t
Space requirement approx.: 2.1 x 1.6 x 2.2 m
Equipped with Heidenhain TNC 131 CNC control, swiveling device for vertical head, coolant system, separate drive for each feed axis, automatic hydraulic clamping of all axes, working axis is automatically released, all axes can be released for manual operation.
Mažas skelbimas
Eislingen/Fils
1 206 km
Apdirbimo centras - vertikalus
MIKRONUM 710/900
Skambinti
Sąlyga: naudotas, Gamybos metai: 1997, X travel: 710 mm
Bcodpfx Aolu N Hiobfsu
y travel: 630 mm
z travel: 500 mm
Spindle speed range: 5 - 5,000 rpm
Main spindle drive power: 11 kW
Tool holder: SK 40
Tool changer: 44 tools
Feed rate: 10 m/min
Clamping surface: 1,200 x 600 mm
Table load capacity: 0.5 t
Total power requirement: 15 kVA
Machine weight approx.: 4.24 t
Equipped with Heidenhain TNC 426 control, 44-position tool changer, all axes with box ways, guides protected by wipers and steel covers.
Heidenhain wired handwheel for easy machine setup.
Mažas skelbimas
Eislingen/Fils
1 206 km
Frezavimo staklės - universalus įrankis kambarys
MIKRONWF 31 D
Skambinti
Sąlyga: naudotas, Gamybos metai: 1989, mašinos/transporto priemonės numeris: 6766, X-travel: 560 mm
Y-travel: 500 mm
Z-travel: 400 mm
Table size: 900 x 530 mm
Control: Heidenhain TNC 355 B/Q
Tool holder: ISO 40 / M 16
Spindle speed range: 40 - 4000 rpm
Bedpfx Aecxxpqjbfocu
Rapid traverse X axis: 6 m/min
Rapid traverse Y axis: 6 m/min
Rapid traverse Z axis: 5 m/min
Infinitely variable feed X/Y/Z: 2 - 3000 mm/min
Total power requirement: 9 kW
Machine weight approx.: 2.6 t
Space requirement approx.: 2.6 x 1.8 x 2.2 m
with MIKRON SMP (160 mm 3-jaw chuck) mounted on table, splash guard enclosure, coolant pump, work light
Palengviname jums paiešką: "mikron vce 600 pro"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.






































































































































































































