Mikron Ums 600 pirkti naudotą (179)

Sąlyga: geras (naudotas), Gamybos metai: 1996, Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Die Maschine verfügt über 2 Spindeln. Eine Spindel für 6.300 min⁻¹, SK 40. Nsdpforuauqsx Abmsdc Die zweite Spindel bis zu 42.000 min⁻¹, HSK E40. Die Spindel wurde 2018 ersetzt.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5.47.07.02, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 450 mm, sukimosi greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 44, TECHNICAL DETAILS Drive Power at 44% Duty Cycle: 9 kW Drive Power at 100% Duty Cycle: 6 kW Max. Torque: 52 Nm Processing Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% Duty Cycle: 800 Nm Ndedpowm I N Hsfx Abmec Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Holder / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Operation Longitudinal Movement Spindle Feed (X-axis): 600 mm Transverse Movement Spindle Slide (Y-axis): 500 mm Vertical Movement Spindle Slide (Z-axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y-axis: 0 – 15,000 mm/min Programmable Feed Rate Z-axis: 0 – 12,000 mm/min Rapid Traverse Speed X-/Y-axis: 15,000 mm/min Rapid Traverse Speed Z-axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-slots: 4 T-slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Positions: 2 × 22 Tool Diameter: 80 / 130 mm Tool Length (max.): 350 mm Tool Weight (max.): 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20-25 s Tool Change Time: 12 - 16 s MACHINE DETAILS Total Weight with Protective Enclosure: 3,000 kg Total Weight with Cabin Roof: 3,100 kg Environmental Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Nominal Power: 15.8 kW Utilized and Connected Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Sąlyga: naudotas, Gamybos metai: 1995, Technical details: X-travel: 600 mm Y-travel: 500 mm Z-travel: 450 mm Machine weight approx.: 3.5 t Ndedpfx Abjw D Hhpjmoc

Sąlyga: geras (naudotas), SPS valdymas, galios modulis, LT modulis, E/R modulis, grąžinimo modulis Ndodpfx Absrb E Hmomjc - Gamintojas: Siemens, Simodrive 611 E/R modulis INT. 16/21KW CNC frezavimo staklė Mikron UME 600 - Tipas: 6SN1145-1BA00-0BA0 - Matmenys: 290/100/A480 mm - Svoris: 10,6 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, bendras aukštis: 2 720 mm, bendras ilgis: 3 160 mm, bendras plotis: 2 240 mm, For sale: 3-axis CNC milling machine, brand Mikron, model VCE 600 Pro. The machine is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis: 600 mm Y-axis: 500 mm Z-axis: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions (LxWxH): 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, internal extraction, through-spindle coolant system, hand control unit, coolant spray gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Optional: Transport and loading can be organized Europe-wide for an additional charge. All prices plus VAT. Nodpfoxnprvox Abmedc Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING & SELLING PRODUCTION & METALWORKING MACHINERY Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For further information or contact options, please visit our website.

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, X ašies padavimo greitis: 16 m/min, Y ašies padavimo greitis: 16 m/min, padavimo greitis Z ašis: 16 m/min, nominali (akivaizdi) galia: 16 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: ITNC 530, stalo apkrova: 800 kg, bendras svoris: 5 300 kg, veleno greitis (min.): 10 000 aps./min, veleno veikimo valandos: 8 500 h, ašies variklio galia: 12 W, veleno nosis: ISO B40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 24, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available upon request. Njdpowxrgtofx Abmjdc Delivery and installation possible by our team.

Sąlyga: naudotas, Gamybos metai: 2007, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, Description: General: Technology: Automated graphite milling center Components: 2x 5-axis HSC milling centers + pallet system with robot Manufacturer: Mikron + EROWA Models: HSM 400 U + HSM 600 U + Robot Multi Twin Year of manufacture: 2007 Control: Heidenhain iTNC 530 Spindle speed: 42,000 rpm Tool holder: HSK 40 Machine I: Manufacturer: Mikron Model: HSM 600 U Travel X/Y/Z: 800/600/500 mm Spindle speed: 42,000 rpm Tool holder: HSK 40 B axis: +30° / -110° C axis: 360° C axis speed: 360 rpm Clamping surface: Erowa UCP 320x320 mm Max. table load: 120 kg Tool magazine: 68 stations Machine II: Manufacturer: Mikron Model: HSM 400 U Ndsdpfsxgpwcsx Abmsc Travel X/Y/Z: 400/240/350 mm Spindle speed: 42,000 rpm Tool holder: HSK 40 B axis: +/- 110° C axis: 360° C axis speed: 250 rpm Clamping surface: ITS 148 Powerchuck Max. table load: 25 kg Tool magazine: 36 stations Automation: Manufacturer: EROWA Model: Robot Multi Twin Gripper station: 6 stations, various grippers Rotary storage: 5 levels Level 1-2: 5x UCP 300x300 mm each Level 3-4: 15x ITS 148 each Level 5: 30x ITS 50 Equipment / Accessories: Measuring systems: Direct on all axes Workpiece measurement: Infrared measuring probe Tool measurement: LASER Setup mode: Electronic handwheel Graphite extraction: 2x BURN WK 5806 Automation: Pallet rotary storage

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Judėjimas X ašies eiga: 600 Y ašies eiga: 450 Z ašies eiga: 450 Ši 5 ašių MIKRON UCP 600 Vario pagaminta 2008 m., aprūpinta Heidenhain valdymu, 600 mm X ašies, 450 mm Y ašies ir 450 mm Z ašies eiga. Pagrindiniai parametrai – 20 000 aps./min. veleno greitis, HSK-A 63 veleno tvirtinimas ir 75 įrankių magazinas. Papildomai įrengta BLUM įrankių matavimo sistema ir 600 L aušinimo skysčio bakelis su juostiniu filtru. Pasinaudokite proga įsigyti šį MIKRON UCP 600 Vario vertikalų apdirbimo centrą. Susisiekite dėl išsamesnės informacijos apie šį įrenginį. Pritaikymo sritys Frezavimas Ndjdpfx Ajxc Rb Ujbmjc

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, CNC Control: Heidenhain iTNC530 NC Swivel Rotary Table (B-axis and C-axis) Pallet Changer with 7 Stations, 300mm x 300mm 30-Position Tool Changer Electronic Handwheel Internal Coolant Supply (IKZ) Chip Conveyor Coolant System Technical Details: X Travel: 600 mm Y Travel: 450 mm Nodpevmqkujfx Abmjdc Z Travel: 450 mm B-axis Swivel Table: -115° / +30° C-axis Rotary Table: 360° Table Size: 300 x 300 mm Spindle Taper: HSK 63 Spindle Speed Range: 20–20,000 rpm Tool Changer: 30-position Weight of the machine approx.: 7,700 kg Technical data, accessories, and machine description are non-binding.

Sąlyga: geras (naudotas), SPS valdymas, galios modulis, LT modulis, I/O modulis, grąžinimo modulis - Gamintojas: Siemens, Simodrive 611 LT modulis INT. 50A iš CNC frezavimo staklės Mikron UME 600 - Tipas: 6SN1123-1AA00-0CA0 Ndsdpjrb E Hbofx Abmsc - Matmenys: 290/50/H480 mm - Svoris: 6,8 kg

Sąlyga: naudotas, Gamybos metai: 2001, Technical data: Tool holder: SK 40 Travel distances: X-axis: 530 mm Nsdpfx Abot Hr Ahomsdc Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Sąlyga: geras (naudotas), Gamybos metai: 2001,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, X-axis: 600 mm, Y-axis: 500 mm, Z-axis: 540 mm, max. table distance: 690 mm, feed rate: 40 m/min, table dimensions: 700 x 500 mm, max. workpiece weight: 800 kg, control: Heidenhain TNC 620, connected load: 18 kVA, length: 2240 mm, width: 3338 mm, height: 2803 mm, weight: 5.6 t, with documentation, low operating hours. Ndsdpfov Hndfjx Abmjc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Heidenhain iTNC 530, darbinis plotas X 600 x Y 450 x Z 450 mm, veleno tvirtinimas CAT40, 24 pozicijų automatinis įrankių keitiklis, 20 000 aps./min. velenas, staklių svoris 6 100 kg, prijungimo galia 16 kW, pagrindinė saugiklis 32 A, darbinė įtampa 400 V, 50/60 Hz Ndedpfsw Hxzmex Abmjc

Sąlyga: geras (naudotas), Gamybos metai: 1996, X ašies eiga: 710 mm, Y ašies eiga: 630 mm, Z ašies eigos atstumas: 500 mm, veleno greitis (min.): 5 aps./min, veleno greitis (maks.): 5 000 aps./min, For sale: Mikron machining center, model UMS 710-900 The machine is in good condition. New ball screws on X and Y axes, new Z-axis cover, and new Z-axis spiral conveyor. Ndedpfx Abstt Acgemec Technical specifications: X-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: TNC 355 HEIDENHAIN Table size: 1200 x 600 mm Maximum table load: 500 kg Spindle taper: SK 40 with ring groove Spindle speeds: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total power requirement: 15 kW Machine weight approx.: 5.0 t Space requirements approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply 44-position tool changer Handwheel Initial fill with operating fluids for the machine available upon request. Loading and transport (Europe-wide) can be organized on request, subject to an additional charge. Prices plus VAT Viewing by appointment possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you wish to sell yours? For further information or to contact us,

Sąlyga: geras (naudotas), SPS valdymas, galios modulis, LT modulis, E/R modulis, grąžinimo modulis - Gamintojas: Siemens, Simodrive 611 LT modulis INT. 2X15A iš CNC frezavimo staklės Mikron UME 600 - Tipas: 6SN1123-1AB00-0AA0 - Matmenys: 290/50/H480 mm Ndodpfx Ajrb E Hfobmec - Svoris: 5,8 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Heidenhain TNC 407 SK 40 air and water cooling Tool changer with 22 stations Travel paths: 600 x 500 x 450 mm Ndsdpsgydn Iefx Abmec Spindle speeds: 5–5000 rpm Feed rate: 0–10,000 mm/min Main spindle drive power: 6 kW

Sąlyga: geras (naudotas), Gamybos metai: 2000, 20 000 U/min, Nodpsr Urm Sofx Abmodc Werkzeugvermessung auf dem Tisch wird mitgeliefert, Von Hand gezeigte Teile werden nicht mitgeliefert.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6,300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2,400mm/3,400mm/2,300mm, Weight: approx. 4,600kg, Control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Nodpfx Asw Exr Asbmodc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Steuerungseinheit Marke: HEIDENHAIN Modell: TNC 410/426 Nsdpfxewqh Tmo Abmsdc Werkzeuge Maximales Werkzeuggewicht: 12 kg Maximaler Werkzeugdurchmesser: 200 mm Werkzeugaufnahme: SK 40 / DIN 69871 Zusätzliche Ausstattung Geräuschemission: Schallleistungspegel 75 dB (A) Dieses 3-Achsen-Bearbeitungszentrum MIKRON UM 600 wurde 1997 gefertigt. Wenn Sie auf der Suche nach hochwertigen Fräskapazitäten sind, ist die MIKRON UM 600, die wir zum Verkauf anbieten, eine Überlegung wert. Kontaktieren Sie uns gerne für weitere Informationen. Einsatzbereiche Fräsen

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 450 mm, For sale is a Mikron UM 600 machining center. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 1997 X-travel: 600 mm Njdpfx Aowx Naqebmedc Y-travel: 500 mm Z-travel: 450 mm Clamping area: 900 x 530 mm Max. table load: 300 kg Control unit: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No automatic tool changer installed; instead, a bracket arm for manual spindle head changeover is mounted (see image 4). Machine dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are NOT included in the offer. Transport and loading throughout Europe can be organized upon request and at an additional cost. All prices are subject to VAT. Viewing possible by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality, affordable metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Sąlyga: geras (naudotas), PLC valdymas, galios modulis, LT modulis, E/R modulis, grąžinimo modulis - Gamintojas: Siemens, Simodrive 611 LT modulis INT. 25A iš CNC frezavimo staklių Mikron UME 600 - Tipas: 6SN1123-1AA00-0BA2 - Matmenys: 290/50/H480 mm Ndjdpfx Asrb E Hqsbmec - Svoris: 5,8 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Space requirement approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Centre (Year of manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining centre, ideally suited for high-precision machining of complex workpieces. With its robust construction, powerful spindle, and reliable Heidenhain control, it meets the highest demands in both single-part and series production. All information is provided without guarantee. Exact technical data available upon purchase. Control: TNC 426/430 Travels X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Max. table load: 400 kg Number of T-slots: 6 T-slot pitch: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool interface: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Ndodpswmzgfsfx Abmjc Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Sąlyga: naudotas, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB Ndodsrc Ilgopfx Abmjc -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimensions: 145/110/H55 mm -Weight: 0.4 kg

Sąlyga: naudotas, CNC control, operator console, machining center operator panel, control unit, operator panel, operating unit -Manufacturer: Mikron, control unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -PCB: WW TCD 22 Operating Unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg Nedpfx Abjrcnmwsmsdc