Mikron Wf 1 pirkti naudotą (178)

Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Pgodpfx Ast Hw D Rjdxeu Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Sąlyga: geras (naudotas), Rotary table, indexing rotary table, dividing head, dividing apparatus, indexing head, NC rotary table, 4th axis, fourth axis, C-axis Pedjkvrqfopfx Adxsgu - Manufacturer: Mikron, NC rotary table type SMP from CNC milling machine Mikron WF 51C/155 - Clamping surface: Ø 630 mm - T-slot width: 14 mm - Motor: Siemens 183V 1.8 kW type HU3078-0AC01 - Encoder: Heidenhain type ROD 250 18000 02S09-04 - Dimensions: 630/630/H495 mm - Weight: 409 kg

Gamybos metai: 1990, Sąlyga: naudotas, x-axis travel 450 mm y-axis travel 400 mm z-axis travel 400 mm SK40 head Heidenhain 355 control system Pgjdpfx Aspxrknedxsu cooling Total power requirement 4 kW Machine weight approx. 2.4 t Required space approx. ... m

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 956.71.80.288, X ašies eiga: 300 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 300 mm, valdiklio modelis: HEIDENHAIN TNC 150, Nėra minimalaus pradinio kainos – užtikrintas pardavimas už aukščiausią pasiūlytą kainą! Mašina parduodama aukcione dėl įmonės uždarymo. Pasiūlymas yra įsipareigojimas laiku pasiimti tarp 2026-01-26 ir 2026-01-29! TECHNINIAI DUOMENYS X ašies eigos ilgis: apie 300 mm Y ašies eigos ilgis: apie 300 mm Z ašies eigos ilgis: apie 300 mm Įrankio laikiklis: SK 40 Stalo matmenys: 1 000 x 500 mm, su 7 grioveliais MAŠINOS DUOMENYS Valdymas: HEIDENHAIN TNC 150 Elektros duomenys Maitinimo įtampa: 380 V Dažnis: 50 Hz Nominali srovė: 25 A Prijungimo galia: 10,5 kW Matmenys ir svoris Matmenys (I x P x A): 2 500 x 2 400 x 2 200 mm Svoris: 2 000 kg KOMPLEKTACIJA Dokumentacija Pgodexqg Itopfx Adxou Spaudimo žnyplės Matavimo kalibrų rinkinys

Sąlyga: naudotas, Savaiminis svoris: 2.000 kg Matmenys (I x P x A): 245 x 210 x 186 cm - Valdymas: CNC - Valdymo sistemos prekės ženklas: Heidenhain - Valdymo sistemos tipas: TNC 114 - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 560 - Y ašies eiga [mm]: 500 - Z ašies eiga [mm]: 560 - Stalo ilgis [mm]: 750 - Stalo plotis [mm]: 425 - Įrankių laikiklis: ISO40 - Min. veleno apsukos [aps./min]: 40 Pgjdpfx Aownhqtjdxeu - Maks. veleno apsukos [aps./min]: 4000 - Parinktys: Skaitmeninis ekranas - └ Skaitmeninio ekrano tipas: Heidenhain TNC 114 - Dokumentacija prieinama: Taip - Transportavimo matmenys: 2450mm x 2100mm x 1860mm (i x p x a) - Transportavimo svoris [kg]: 2000kg Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Sumų apmokestinimas: PVM atskaitomas verslui Pristatymas ir įrenginių atpirkimas galimi bet kada visiems pramoniniams įrenginiams Lukas van Rossum

Sąlyga: geras (naudotas), Universali įrankinė frezavimo staklė Mikron WF2SA Pagaminimo metai apie 1990 Pgsdpfoxlq N Djx Adxou Heidenhain Aktive – skaitmeninis indikatorius TNC 114 Bepakopis padavimo greitis Staklių apšvietimas Aušinimo skysčio įrenginys Staklių kojos Judesių eigos: X 420 mm Y 250 mm Z 345 mm Sūkių diapazonas 50 - 2240 aps./min Tvirtinimo paviršius 635 x 250 mm Padavimo greitis 3 ašyse 0 - 750 mm/min Greitas padavimas 3 ašyse 1400 mm/min Tvirtinimas ISO 40 Vertikali / horizontali ištraukiama pinolė Centrinis tepimas Matmenys apie 1,2 x 1,2 x 1,6 m Svoris apie 1200 kg Staklės geros, pilnai veikiantčios būklės. Pageidaujant galima atsiųsti vaizdo įrašus apie geometrijos matavimus. Y ašyje įmontuoti nauji alyvos lygio stebėjimo langeliai. Atgręžimo laisvumas X ašyje 0,1 mm Atgręžimo laisvumas Y ašyje 0,15 mm Atgręžimo laisvumas Z ašyje 0,3 mm Kaina nurodyta be PVM, atsiėmimas iš sandėlio, pakrovimas įskaičiuotas.

Sąlyga: labai geros būklės (naudotas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivelling Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindle drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Pgedpfx Adslnfggjxeu Quill travel, vertical: 110 mm Feed drive Feeds in all 3 axes: steplessly adjustable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X-axis): automatic: 400 mm Cross travel of the clamping table (Y-axis): automatic: 400 mm Vertical travel of the clamping table (Z-axis): automatic: 385 mm We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Sąlyga: naudotas, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC Path Control Machine No. 440911 Year approx. 1985, Overhauled and Control Retrofit in 11/2000 Travel Range X: 600 mm Y: 600 mm Z: 460 mm Table Size 900 x 550 mm Spindle Taper ISO 40 Distance Spindle Nose - Table max. 520 mm Spindle Speed 31.5 - 3150 rpm, 21 steps Feed Rate 1 - 2000 mm/min Rapid Traverse Speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill Travel 100 mm Main Spindle Drive 4 and 5 kW Pgjdpfxew A Af Is Adxou Power Connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels to left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (read off display) - Control cabinet fixed to rear of machine - Coolant system in machine base - Swiveling control panel - Electrical diagram, control manual available Space requirements (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Gamybos metai: 1992, Sąlyga: paruoštas naudoti (naudotas), X-axis: 560 mm, Y-axis: 500 mm, Z-axis: 400 mm, Vertical clamping table dimensions: 300 x 450 mm, Number of threaded holes: 2 x 6, Threaded hole spacing: 45 mm, Thread: M16, Angular table clamping surface: 460 x 800 mm, Number of T-slots: 7, T-slot spacing: 63 mm, T-slot width: 14 mm, Max. workpiece weight (recommended): 350 kg. Milling spindle drive Number of working spindle speeds: 21, Speed (geometrically stepped): 40–4,000 rpm, Speed step increment: 1.259, Spindle motor power: 3.3 / 4 kW, Tool holder: ISO 40 / M16 with draw-in slot, Vertical quill stroke: 90 mm, Stepless feed adjustment in all 3 axes: 2–3,000 mm/min, Rapid traverse X-axis and Y-axis: 6,000 mm/min, Rapid traverse Z-axis: 4,000 mm/min, Feed drive torque longitudinal and transverse: 3.5 Nm each, Feed drive torque vertical: 7 Nm, Control: Heidenhain TNC 407, Connected load: 8.7 kW, Length: 3,705 mm, Width: 2,430 mm, Height: 3,100 mm, Machine weight with vertical milling head and angular table: 2,410 kg, Crate base weight: 170 kg, Transport crate weight: 400 kg, Operating hours: 18,924 h. Accessories: 3D probe, 20 tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Pgedpfsxcxz Nox Adxou

Gamybos metai: 1987, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel path x: 630 mm Travel path y: 500 mm Travel path z: 460 mm Quill stroke (manual): 45 mm Pjdpfx Ade H I Hdexegu Spindle taper: ISA 40 Spindle speeds: 31.5 – 3,150 rpm Feed rates, infinitely variable: 1 – 3,000 mm/min Rapid traverse: x/y 6 m/min, z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1,800 x 2,120/2,600 x 2,020 mm Weight: 3,100 kg Control: HEIDENHAIN, TNC 155

Sąlyga: geras (naudotas), Pilnos charakteristikos yra skelbimo nuotraukose. CNC HEIDENHAIN 426. Staklės puikios mechaninės būklės. Psdpfxjxl Htfe Adxogu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 240 aps./min, veleno greitis (min.): 30 aps./min, bendras aukštis: 1 750 mm, bendras plotis: 1 790 mm, bendras ilgis: 1 375 mm, stalo plotis: 450 mm, stalo ilgis: 800 mm, bendras svoris: 1 450 kg, Freza prijungta prie tinklo, gali būti apžiūrėta susitarus iš anksto. Labai gera būklė. Priedai: 10 vnt. įrankių laikiklių SK 40 Pgedpfx Adexbtaqsxsu 1 vnt. hidraulinis staklinis spaustuvas su Heidenhain trajektorijų valdymu.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Display Heidenhain TNC 114 and Infinitely Variable Feed Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1-750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40, extendable Pgodpfxjw Ni Rie Adxeu >> Weight: approx. 1600 kg Accessories and Equipment: >> 3-axis active digital display Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: Offered here is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, allowing it to traverse a programmed distance in any axis (X, Y, or Z) and stop automatically upon reaching the setpoint. Up to 4 different zero points can be set; dimensions can be entered either as absolute or incremental values. The feed rate is continuously variable from 0-750 mm and can be regulated even during milling operations; rapid traverse is possible at the push of a button. The spindle speed is adjustable in steps from 50 rpm to 2240 rpm, but only when at a standstill. The vertical milling head is mounted with three screws and can be removed or reattached within just 2 minutes; it is manually fastened with the articulated arm visible on the left side of the machine and simply swung aside. A special feature of this machine is its large travel distances relative to its compact size: Z=380 mm, X=500 mm, and Y=500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our location.

Sąlyga: geras (naudotas), Gamybos metai: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Equipped with Heidenhain TNC 114 active digital readout Infinitely variable feed Lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Table clamping area: 635 x 250 mm Feed in 3 axes: 0 - 750 mm/min Pjdpfxorywgzs Adxegu Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Extendable vertical/horizontal quill Dimensions: approx. 1.2 x 1.2 x 1.6 m Weight: approx. 1200 kg

Sąlyga: paruoštas naudoti (naudotas), Control: HEIDENHAIN TNC 150. Pgedpfxegtiaaj Adxju

Sąlyga: naudotas, Gamybos metai: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors, ex-stock, without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Type WF 2/3 S Year of manufacture approx. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special equipment: • HEIDENHAIN 2-axis digital readout for longitudinal and cross axis • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual movement • Vertical head (swiveling +/- 90°) with quill and swing-out device for using the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindles Pgsdju U Sabspfx Adxou • Fixed angle table 450 x 800 mounted • Built-in coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories including tool holders, horizontal milling equipment with various horizontal arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table changing device This machine is still a “real” Mikron milling machine and was made in tried-and-tested Swiss quality. This machine is ideally suited for both toolmaking and training purposes. Condition: Very good condition! Used only for toolmaking. Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net - after receipt of invoice We always have a selection of universal and CNC milling machines of all kinds in stock – Please feel free to ask about alternatives!

Sąlyga: naudotas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Pgodpfx Adokzpmuoxeu - Manufacturer: Trasfor, Transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 - Type: TNM1m2k5/E - Technical data: see photo of nameplate - Dimensions: 180/160/H215 mm - Weight: 25.5 kg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, 1 used universal milling machine Make: Mikron Model: WF 2/3 DP Equipped with Heidenhain 135 path control Travel ranges X/Y/Z: 400/410/400 mm Table clamping surface: 800 x 450 mm Spindle speed: 30 – 2240 rpm Psdpfxev N Dzfo Adxegu Feeds: 1 - 750 mm/rev Rapid traverse: 2000 mm/min Tool holder: ISO 40 Machine weight approx.: 1.4 t Space requirement approx.: 2.1 x 1.6 x 2.2 m

Sąlyga: paruoštas naudoti (naudotas), Speed: 3150 rpm, Travel X/Y/Z: 710mm/500mm/500mm, Number of spindle speeds: 21, Feed rate: 2000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table size X/Y: 500mm/1000mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, Weight: approx. 3300 kg, Control: Heidenhain TNC 155. Documentation available. Pgjdpfjtuwk Uox Adxou

Sąlyga: naudotas, Transformer, Trafo, Converter, Three-phase autotransformer, Three-phase transformer - Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 - Type: DT - Power rating: 300 VA - Primary: 3x380 V - Technical data: see photo nameplate Pgjdekzpm Hjpfx Adxeu - Dimensions: 150/90/H150 mm - Weight: 5.7 kg

Gamybos metai: 1988, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 710mm/500mm/460mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, tool holder: SK40, spindle speed: 4000rpm, machine dimensions X/Y/Z: approx. 2000mm/2600mm/2250mm, weight: approx. 3400kg, control unit: Heidenhain TNC 355, operating hours: approx. 34,000h. Includes coolant system, full work area enclosure, approx. 34x SK40 tool holders, sledges and shafts for gear hobbing. Documentation available. On-site inspection possible. Psdpfx Adjv Sct Soxegu

Sąlyga: naudotas, Safety switch, safety interlock switch, guard door switch, limit switch, push button, fuse switch, position switch, magnetic interlock switch, safety locking device Pgedpfxorcnm Ne Adxsu -Manufacturer: Schmersal, safety locking device from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 en: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg

Sąlyga: naudotas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer - Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 - Model: 100-911637 - Power rating: 4.5 kVA - Primary: 3x380 V - Secondary: 3x95/165 V Pedpfx Aekyy Uqodxegu - Dimensions: 335/135/H350 mm - Weight: 41 kg

Sąlyga: naudotas, Ball screw with nut, roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw drive from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm Pjdskvrqiepfx Adxogu -Shaft: Ø 32 mm -Dimensions: see photos -Overall dimensions: 870/140/H130 mm -Weight: 18 kg

Sąlyga: naudotas, CNC control system, operator panel, machining center - Manufacturer: Heidenhain, operator panel/CNC control system from CNC milling machine Mikron WF 51C/155 - Control: Heidenhain TNC 155 - Individual components: see photos - Dimensions: 660/640/H610 mm Pedpfx Adekxhn Ejxegu - Weight: approx. 73 kg