Mikron Vce 500 pirkti naudotą (188)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5.47.07.02, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 450 mm, sukimosi greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 44, TECHNICAL DETAILS Drive Power at 44% Duty Cycle: 9 kW Drive Power at 100% Duty Cycle: 6 kW Max. Torque: 52 Nm Processing Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% Duty Cycle: 800 Nm Number of Gear Stages: 4 Itsdowm I N Hjpfx Agfed Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Holder / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Operation Longitudinal Movement Spindle Feed (X-axis): 600 mm Transverse Movement Spindle Slide (Y-axis): 500 mm Vertical Movement Spindle Slide (Z-axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y-axis: 0 – 15,000 mm/min Programmable Feed Rate Z-axis: 0 – 12,000 mm/min Rapid Traverse Speed X-/Y-axis: 15,000 mm/min Rapid Traverse Speed Z-axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-slots: 4 T-slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Positions: 2 × 22 Tool Diameter: 80 / 130 mm Tool Length (max.): 350 mm Tool Weight (max.): 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20-25 s Tool Change Time: 12 - 16 s MACHINE DETAILS Total Weight with Protective Enclosure: 3,000 kg Total Weight with Cabin Roof: 3,100 kg Environmental Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Nominal Power: 15.8 kW Utilized and Connected Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensively equipped! Very low spindle hours! Technical Data: -Heidenhain ITNC 530 HSCI -X-axis: 600 mm -Y-axis: 450 mm -Z-axis: 450 mm -B-axis: +45 / -120 ° -C-axis: 360 ° -Spindle speed range: 20,000 rpm -Spindle drive: 23 / 30 kW -Torque: 91 Nm -Tool holder: HSK 63 -Pallet size: 280 x 280 mm -Max. pallet load: 150 kg -Number of tool magazine positions: 60 -Max. tool diameter: 90 (130) mm -Max. tool length: 200 mm -Max. tool weight: 6 kg -Tool change time: 3 sec. -Feed force X-Y-Z: 5 kN -Rapid traverse X-Y-Z: 22 m/min -Acceleration X-Y-Z: 5 m/s² -Rapid traverse B-axis: 50 rpm -Rapid traverse C-axis: 140 rpm Equipment: -7 pallets, including 6 pallets with clamping devices (see photos) -Electronic handwheel -Infrared measuring probe -Laser tool measuring system -Direct path measuring systems -APS Advanced Process System -ITC Intelligent Thermal Control -rConnect Live Remote Control (1 year) -KinematicsOpt -CT 60 tool magazine -DYNAFIX 7-position pallet changer -SIGMATEC 15 / 900 cbm/h oil mist extraction unit -Tool air blow-off device -Blow air at the spindle slide -Blow air through the spindle center -Internal coolant system 18 – 70 bar -Paper band filter system -Chip conveyor -Spindle oil chiller Installation dimensions (L x W x H): 6,600 x 4,000 x 2,800 mm Weight: approx. 8,600 kg An on-site inspection/test under power is, of course, possible. We are not your average machinery dealer -> Here you get advice from CNC experts! We are happy to offer you transport, installation/moving in, commissioning, as well as operator training with our own technicians. Everything from a single source: Ijdex Hx Rhepfx Agfetd We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: -Service -Maintenance -Overhaul -Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Būklė: geras (naudotas), Gamybos metai: 2002, Mašina yra geros būklės. Šoniniai lakštai buvo nuimti, todėl nereikia plataus transporto. Itodpfx Astwpamjgfed

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Heidenhain iTNC 530, darbinis plotas X 600 x Y 450 x Z 450 mm, veleno tvirtinimas CAT40, 24 pozicijų automatinis įrankių keitiklis, 20 000 aps./min. velenas, staklių svoris 6 100 kg, prijungimo galia 16 kW, pagrindinė saugiklis 32 A, darbinė įtampa 400 V, 50/60 Hz Itodpfjw Hxzmsx Agfjd

Būklė: paruoštas naudoti (naudotas), Parduodama gerai išlaikyta Mikron VC 1000 frezavimo staklė dėl naujos įsigijimo. Ijdpfx Agjh Tnpxofstd

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: KU 4165M, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 572 mm, Y ašies eiga: 322 mm, Z ašies eigos atstumas: 265 mm, įrankių magazino lizdų skaičius: 22, sukimosi greitis (maks.): 15 000 aps./min, The value of the delivered spare parts amounts to approx. €70,000 TECHNICAL DETAILS Loading modules: 1 module Machining modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnostics: available Programming: ISO code, simulation via CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to main time, manual, with 3-axis handling or robot Part feeding: paternoster / stack magazine Workpiece change (chip-to-chip time): approx. 6 s Axes Itjdpfx Agsxamh Esfjd Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N B-axis rotational speed: 1,000 rpm C-axis rotational speed: 500 rpm B-axis acceleration: 52 rad/s² C-axis acceleration: 90 rad/s² B-axis torque (clamped): 1,000 Nm B-axis torque (unclamped): 287 Nm C-axis torque (clamped): 300 Nm C-axis torque (unclamped): 187 Nm Working spindle Tool holder: HSK 40-A Outer diameter: 108 mm Rotational speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Operation: pneumatic, 6 bar Tool changer Tool discs: externally pre-settable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool disc weight: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. tool diameter: 63 mm Max. tool diameter with free space: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. total tool weight per disc: 15 kg Positioning time per tool step: 250 ms Tool holder: HSK 40-A, acc. to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 956.71.80.288, X ašies eiga: 300 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 300 mm, valdiklio modelis: HEIDENHAIN TNC 150, Nėra minimalaus pradinio kainos – užtikrintas pardavimas už aukščiausią pasiūlytą kainą! Mašina parduodama aukcione dėl įmonės uždarymo. Pasiūlymas yra įsipareigojimas laiku pasiimti tarp 2026-01-26 ir 2026-01-29! TECHNINIAI DUOMENYS X ašies eigos ilgis: apie 300 mm Y ašies eigos ilgis: apie 300 mm Z ašies eigos ilgis: apie 300 mm Įrankio laikiklis: SK 40 Stalo matmenys: 1 000 x 500 mm, su 7 grioveliais MAŠINOS DUOMENYS Valdymas: HEIDENHAIN TNC 150 Elektros duomenys Maitinimo įtampa: 380 V Dažnis: 50 Hz Nominali srovė: 25 A Prijungimo galia: 10,5 kW Matmenys ir svoris Matmenys (I x P x A): 2 500 x 2 400 x 2 200 mm Svoris: 2 000 kg Iodpfx Ajxqg Itsgfetd KOMPLEKTACIJA Dokumentacija Spaudimo žnyplės Matavimo kalibrų rinkinys

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel path x: 630 mm Travel path y: 500 mm Travel path z: 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 – 3,150 rpm Isdps H I Hdsfx Agfetd Feed rates, infinitely variable: 1 – 3,000 mm/min Rapid traverse: x/y 6 m/min, z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1,800 x 2,120/2,600 x 2,020 mm Weight: 3,100 kg Control: HEIDENHAIN, TNC 155

Būklė: geras (naudotas), MIKRON UCP 600 VARIO yra 5 ašių apdirbimo centras, skirtas aukštam tikslumui, preciziškumui ir patikimumui. Stalas 320×320 mm; eiga X600 Y450 Z450; C ašis dalijama n x360°; frezavimo galva B -115/+30°. Įrankių magazinas – 30 vietų; įrankio Ø maks. 80 mm, ilgis 200 mm, svoris 8 kg; laikiklis HSK-A63. Velenas be pakopų 0–20 000 aps./min; galia 30 kW; sukimo momentas 91 Nm. Pasiūka 15 000 mm/min, greitasis judėjimas – 22 m/min; prijungimas 3x400 V 50 Hz. Svoris ~7 700 kg; matmenys L6820×W4800×H2540(2810) mm. Priedai: popierinis filtras, vandens aušintuvas, drožlių transporteris, stalo variantas EROWA UPC, elektroninis rankinis ratukas, lempa, būklės indikatorius. 4+5 ašys renovuotos 2023 m. Pasiekia griežtas tolerancijas; tinka automobilių, aviacijos, medicinos technikos, laikrodžių gamybos ir įrankių pramonei. Iodoxx U U Rjpfx Agfstd

Būklė: labai geros būklės (naudotas), MIKRON HPM 800 U yra 5 ašių apdirbimo centras, skirtas preciziškumui, aukštam tikslumui ir patikimumui. Stalas 630×440 mm, 5 T formos grioveliai, apkrova 800 kg; eigos X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, atstumas 600 mm; 115 įrankių, maks. Ø 80 mm (laisvai 160), ilgis 350 mm. 0–20000 aps./min; padavimo greitis 0–20000 mm/min; greitoji eiga 45 m/min; pagreitis 6 m/s²; padavimo jėga 6000 N; 3×400V 50Hz; 55 kW; svoris ~15000 kg; matmenys 3505×3100×2980 mm. Priedai: aukšto slėgio aušinimas, popierinis filtras, 2 paletės, ruošinio zondas, lazerinis įrankių kontrolė, drožlių transporteriai. Tinka siauriems nuokrypiams automobilių, aviacijos, medicinos ir laikrodžių pramonėje. Iedsxx U Nnspfx Agfetd

Būklė: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 956.71.80.274, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 400 mm, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 400 mm, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, The equipment shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. The machine is supplied together with a vice and an included tool cabinet containing the items shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (some barely used), partially as new, mostly with solid carbide coating, suitable for both steel and aluminum machining. Itedpfxownq Sgo Agfod

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Iodpfx Aot Hw D Rogfetd Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors, ex-stock, without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Type WF 2/3 S Year of manufacture approx. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special equipment: • HEIDENHAIN 2-axis digital readout for longitudinal and cross axis • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual movement • Vertical head (swiveling +/- 90°) with quill and swing-out device for using the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindles • Fixed angle table 450 x 800 mounted • Built-in coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories including tool holders, horizontal milling equipment with various horizontal arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table changing device This machine is still a “real” Mikron milling machine and was made in tried-and-tested Swiss quality. This machine is ideally suited for both toolmaking and training purposes. Condition: Very good condition! Used only for toolmaking. Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net - after receipt of invoice We always have a selection of universal and CNC milling machines of all kinds in stock – Please feel free to ask about alternatives! Iedpsu U Sabefx Agfotd

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Itedpfx Ast Hwxbogfsd Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Būklė: naudotas, Gamybos metai: 1997, Technical details: Iodpfx Agsvb Hzrsfotd X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Drive power – working spindle: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping surface: 1,200 x 600 mm Table load capacity: 0.5 t Total connected load: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, 44-position tool changer, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired electronic handwheel for easy machine setup.

Būklė: geras (naudotas), Gamybos metai: 1972, Ratų skersmuo – maks. 80 mm Ratų plotis 60 mm Modulis – maks. 3 Modulis – min. 0,1 Bendras galios poreikis 0,4 kW Mašinos svoris apie 120 kg Iodpfx Agjw N S D Sjfjtd Reikalinga erdvė apie 0,6x0,6x0,75 m Mašina skirta nedidelių kūginių / tiesių krumpliaračių šlifavimui. Kūginių krumpliaračių frezavimui naudojama Mikron 102.01.

Būklė: geras (naudotas), Gamybos metai: 1991, Machine weight approx. 6 t The base machine design is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece clamping is between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the machine base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angular adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled Itsdpjub Amfefx Agfed - IBH control system - Loading device - Extensive accessories Technical specifications: - Maximum module for gear hobbing with hobs according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Maximum workpiece diameter with manual loading: 200 mm - Maximum workpiece diameter with automatic loading: 150 mm - Maximum workpiece length: 400 mm - Maximum / minimum cutter diameter: 102/40 mm - Maximum cutter length: 230 mm - Maximum / minimum cutter arbor diameter (standard): 32/16 mm - Axial slide travel = maximum milling length, Z-axis: 300 mm - Radial slide travel, X-axis: 140 mm - Cutter traverse (shift travel) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swivel angle shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm - Y-axis (milling spindle face): 50 - 230 mm - W-axis (tailstock spindle face): 165 - 585 mm - Cutter speed range, standard B-axis: 0 - 1500 rpm - Workpiece speed, C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (portal loader): 80,000 mm/min

Būklė: naudotas, Gamybos metai: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm Table clamping surface 1000 x 500 mm Spindle taper SK 40 Control HEIDENHAIN TNC 150 Spindle speeds 31.5 - 3150 rpm Feeds - longitudinal/cross/vertical 1 - 3000 mm/min Rapid traverse longitudinal and cross 6 m/min Rapid traverse vertical 4 m/min Quill stroke 110 mm Distance spindle nose to table max. 559 mm Max. table load 500 kg Total power requirement 14 kW Iodpfx Astqqplsgfotd Machine weight approx. 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system

Būklė: naudotas, Gamybos metai: 1998, X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table clamping surface: 1100 x 585 mm Rotary table diameter: 500 mm Spindle taper: SK 40 Spindle speeds: 5 - 6300 rpm Spindle power: 11 kW Number of tool magazine positions: 2 x 22 Control: HEIDENHAIN TNC 426 Total power requirement: 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system Itedpfx Agotz Sqhsfjd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing table machine MIKRON MULTISTAR CX 24 The machine can be inspected under power. Part feeding is not an issue. Itodpjt I T N Eefx Agfsd Equipped with MITSUBISHI AACPU-S1 control – Year of manufacture: 1996 – Detailed technical data as per attachment – The machine can be inspected while cutting. Modification – installation – commissioning – application can be offered. Pricing: ex location, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – errors excepted. Payment: As customary for used machinery, strictly net payment before collection.

Būklė: naudotas, Gamybos metai: 1997, X travel: 710 mm y travel: 630 mm z travel: 500 mm Spindle speed range: 5 - 5,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Iedpelu N Hisfx Agfstd Feed rate: 10 m/min Clamping surface: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, 44-position tool changer, all axes with box ways, guides protected by wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Būklė: naudotas, Gamybos metai: 1980, X-travel: 500 mm Y-travel: 500 mm Z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feed rates: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Itedpfxjcxxq Ds Agfed Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 CNC control, swiveling device for vertical head, coolant system, separate drive for each feed axis, automatic hydraulic clamping of all axes, working axis is automatically released, all axes can be released for manual operation.

Būklė: naudotas, Gamybos metai: 1989, mašinos/transporto priemonės numeris: 6766, X-travel: 560 mm Ijdpfjcxxpqex Agfotd Y-travel: 500 mm Z-travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X axis: 6 m/min Rapid traverse Y axis: 6 m/min Rapid traverse Z axis: 5 m/min Infinitely variable feed X/Y/Z: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m with MIKRON SMP (160 mm 3-jaw chuck) mounted on table, splash guard enclosure, coolant pump, work light

Būklė: naudotas, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Itjdec Tt Hrspfx Agfed Table size: 1000 x 500 mm Travel paths: X - 710 mm, Y - 500 mm, Z - 460 mm Spindle speed: 31.5–3150 rpm Accessories: Angle table, coolant system, various tool holders

Būklė: naudotas, Gamybos metai: 1985, x-axis travel: 500 mm y-axis travel: 500 mm z-axis travel: 350 mm table surface: 800 x 450 mm spindle taper: ISO 40 quill stroke: mm feeds - longitudinal & cross: mm/min feeds - vertical: mm/min speed range max.: 3150 rpm power supply: 380 V / 50 Hz drive power: 4 kW Ijdpfx Agjtv Ia Tsfjtd machine weight approx.: 1.7 t space requirement approx.: 2.5 x 2.3 x 2.0 m control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,